Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Kitchen Remodeling: The Dallas Owner’s Guide
We install Mighty Buildings-compatible kitchen remodeling in Dallas, with typical whole-kitchen projects running $14,000 – $45,000 depending on scope, cabinet line, and whether the panel connections or plumbing rough-in need rework. Cabinets alone land at $4,000 – $13,000; countertops $2,000 – $6,500. There’s no “same-day” on a kitchen remodel, and anyone who tells you otherwise is selling you something. Most Dallas homeowners come to us after a panel seam separates, a cabinet box pulls loose from a prefab wall stud pattern that’s tighter than stick-built framing, or a countertop outrigger on a Mighty Buildings model starts to sag under a Cambria slab.

We’re an independent service provider. We’re not affiliated with Mighty Buildings, and we don’t sell their parts or their panels. What we do is know how their assemblies go together, and how to extend the kitchen without fighting them.
Which Mighty Buildings Models This Applies To
Mighty Buildings has shipped a few panel systems to the Texas market, most commonly the single-family “M” series and the ADU panels, and the kitchen assemblies are the part where local installers get into trouble. The wall panels are factory-finished and dimensionally repeatable, which is good news for cabinet layout and bad news if you try to frame like it’s a 2×4 wall. The studs are set on a different spacing than typical stick framing, so a standard 16″ on-center cabinet run can miss the actual mounting points entirely. Identify your assembly before you order anything: your model number is on the panel tag inside the utility room or on the foundation pier label, and it should match a spec sheet you can pull.
The OEM-vs-aftermarket call is usually clear once you know the model. Mighty Buildings can supply the factory cabinet boxes and connection hardware, and for a like-for-like panel repair that’s often the cleanest route. For everything above the panel – the cabinets, the island, the slab – you’re dealing with standard kitchen products, and that’s where an aftermarket path makes more sense on price and lead time. We also work in KraftMaid, Cambria, and Silestone, which is what most Dallas owners end up choosing once they price the factory options.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mighty Buildings Kitchen Remodeling Is Failing
A failing kitchen assembly rarely gives one dramatic symptom. It gives you a set of small ones that add up.
- Cabinets pulling off the wall. The mounting fasteners are landing between the actual panel studs, so the load walks out over months. If the gap at the top of an upper cabinet is closing, that’s the cause.
- Panel seams separating at the countertop line. DFW’s summer heat cycling – attic temperatures climbing well past 130°F and dropping 40 degrees overnight – moves the factory panel joints more than you’d expect on a rigid assembly. A hairline crack at a seam in July usually widens by October.
- Sagging under a heavy slab. A Cambria or stone countertop over a factory outrigger that was sized for a lighter surface will deflect. You’ll feel it first at the front edge of the island, not the perimeter.
- Water staining at the sink cabinet base. Prefab kitchen panel bases take a leak poorly because the finished panel skin doesn’t breathe the way drywall does. Staining tells you water sat there longer than you think.
- Backsplash cracking at the panel joint. A tile backsplash bonded across a panel transition will crack along that line as the two panels move differently. It’s a panel-movement symptom, not a tile problem.
Two of those five – the cabinet pull-out and the backsplash crack – almost always trace back to fastening into the wrong stud pattern. Worth knowing before you replace tile.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing for Mighty Buildings-compatible kitchen work in Dallas runs in these bands. These are the numbers we quote, and the number you see is the number you pay.

| Scope | Dallas Installed Range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Full kitchen remodel | $14,000 – $45,000 |
What moves you up the range: panel rework or blocking to correct the stud pattern, stone slab thickness, whether the plumbing rough-in needs relocating, and cabinet line. What doesn’t change: no hidden line items after the quote. Every job carries the 730-Day Done Right Promise, and we pull the permits – the City of Dallas requires one for any remodel that touches plumbing or electrical, and prefab assemblies don’t get an exemption. Call (844) 797-4808 for a free estimate.
DIY or Call Us?
You can safely measure your cabinet-to-panel stud spacing, photograph the panel tag, pull your model spec sheet, and check for the seam and water-staining symptoms above. That’s information, not injury risk.
Where DIY goes wrong: hanging a loaded upper cabinet or a stone-slab island on a panel wall means hitting a specific mounting point at a specific load, and a failed cabinet or a dropped slab hurts people. If your remodel touches the panel connections or relocates plumbing or electrical, or if you’re doing a full kitchen scope, keep it with a trained professional. A botched cabinet anchor can drop a 40-pound box on someone standing at the counter. That’s not a risk worth taking to save on labor.
Call (844) 797-4808. A live person answers, 24/7.
FAQs
Expect the factory panel assembly itself to hold up well past 20 years, but the cabinets and counters above it show their first problems in Dallas within 5 to 10 years because of heat cycling and moisture. Panel seams and cabinet mounting are the first things to check. Call (844) 797-4808 for an inspection – estimates are free.
Often yes, if the failure is confined to cabinet anchoring or a single panel seam – we can add blocking and re-fastener without tearing out the whole kitchen. If the panel skin is water-damaged or the slab outrigger has deflected, replacement is the honest call. A free estimate will tell you which. Call (844) 797-4808.
A cabinet-only swap typically runs 2 to 4 days, and a full kitchen remodel 2 to 4 weeks – it depends on whether the rough-in needs moving and whether custom cabinet lines are involved. That’s a planning number, not a promise on a specific house. Call (844) 797-4808 for a free estimate with a real timeline.
We work from your model number and panel tag, then spec a part that matches the actual stud pattern and load – never a stock “close enough” box. We don’t claim to carry Mighty Buildings parts on a truck; we source the right component for your specific assembly, with the 730-Day Done Right Promise on the install. Call (844) 797-4808.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.