Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boxabl Kitchen Remodeling: The Dallas Owner’s Guide
Boxabl kitchen remodeling in Dallas runs $14,000 – $45,000 fully installed, depending on whether you’re replacing the galley module’s cabinets, counters, and backsplash or doing a full reconfiguration within the unit’s structural walls. We install Boxabl-compatible kitchen finishes for Casita owners across Dallas, and the work is planned, permitted, and scheduled, not same-day. Groundwork Construction Co. of Dallas is an independent service provider and is not affiliated with Boxabl.

Most Dallas owners discover a failing kitchen component the same way: a cabinet door that won’t stay shut after a summer of 100-plus-degree days, a laminate counter edge lifting near the sink, or a backsplash tile popping loose at the corner where the module seam sits. The Casita’s kitchen is compact and factory-built, so the failure is usually at a joint, a fastener, or a seam rather than in the middle of a panel. Once one cabinet box racks out of square, the drawer slides start binding and the whole run feels loose.
Which Boxabl Models This Applies To
The Casita is the unit most Dallas owners have on site, and its kitchen footprint is what drives every part decision. Boxabl has shipped Casita units across multiple production runs, and the cabinet box dimensions, counter depth, and backsplash panel sizes have shifted between runs. That means the part that fits a 2022 unit may be a half-inch off on a 2024 unit. Before we quote anything, we measure the actual box, the wall return, and the counter overhang in your unit, and we photograph the label plate inside the cabinet or on the module frame. The serial and production info on that plate is the fastest way to match the right replacement.
On the OEM-versus-aftermarket question, the honest answer for Boxabl is mixed. Boxabl-specific cabinet boxes, counter panels, and trim pieces come from the factory, and availability can run weeks. Standard aftermarket cabinet boxes, quartz or solid-surface counters, and tile backsplash can be fitted to the same opening with shimming and a custom filler strip, usually faster and often at lower cost. We tell Dallas owners which route makes sense for their unit rather than pushing one. Where we do use stock brand partners, we work with KraftMaid, Cambria, and Silestone for counters and cabinetry, and each of those has a specification sheet we can match to your Casita’s dimensions.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boxabl Kitchen Remodeling Is Failing
- Cabinet doors that won’t stay aligned. Factory hinges on the Casita cabinets loosen as the box shifts in North Texas heat cycles. When the door sags at the top corner, the hinge plate is pulling out of thin panel material, not just out of adjustment.
- Drawer slides that bind or grind. The cabinet box has racked slightly out of square, usually from a floor that settled after the unit was set. A slide that worked in spring will drag by August if the box isn’t re-squared.
- Counter edge lifting near the sink or range. Laminate and solid-surface counters expand and contract with heat and moisture. When the edge lifts, water gets under it and the substrate swells, and the counter has to come off rather than be glued back down.
- Backsplash tile or panel separating at a seam. The module seam behind the counter moves differently than the wall panel next to it. Hairline cracks that widen into loose tile are the first sign the substrate behind the backsplash has flexed.
- Water staining under the sink cabinet floor. The Casita sink cabinet floor is a thin panel, and a slow supply-line drip or a failed P-trap will stain and soften it within a season. By the time you see the stain, the cabinet floor usually needs replacement, not just drying.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed kitchen work in a Dallas Boxabl unit prices out at these Dallas ranges. The number you see is the number you pay, and we put it in writing before any work starts.
| Work | Installed range (Dallas) |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: whether the cabinet boxes are OEM or aftermarket, counter material (laminate versus Cambria quartz versus Silestone), whether the sink cabinet floor or a wall panel needs repair behind the finish, and how much trim and filler work the module seams require. Parts and labor are quoted line by line, so you see the cabinet cost, the counter cost, and the install labor separately. Every job is covered by the 730-Day Done Right Promise; if it’s not done right, we make it right.
DIY or Call Us?
You can safely check a few things yourself: measure the cabinet opening, photograph the label plate, test whether the drawer slides are loose or the box is out of square, and look under the sink for staining. Those checks help us quote accurately.
Where DIY goes wrong on a Boxabl kitchen is at the structural and utility connections. Cutting a counter panel to fit a module seam, moving a sink supply or drain line, or pulling a cabinet box off a wall that shares framing with the module shell can create a leak or a load problem that costs more to fix than the original job. Electrical work behind the range or under the counter is not a homeowner job; a live circuit in a factory panel is a real hazard, and it needs a licensed electrician. If your unit needs permit work, we pull the permits and pass the inspection.
The smart move is a free estimate. Call (844) 797-4808 and we’ll walk your Casita kitchen with you, measure it, and put a written range in front of you. A live person answers, 24/7.
FAQs
Most Dallas Casita kitchens show their first real failure between year five and year eight, and the timing depends on sun exposure and how hard the unit’s climate control runs. North Texas heat cycles are the main driver, since cabinet boxes and counters expand and contract more here than in milder climates. A unit under shade with steady AC will outlast one baking on a west-facing pad.
Sometimes yes. A loose hinge, a misaligned drawer slide, or a tile that popped off clean can usually be repaired rather than replaced. A swollen cabinet floor, a delaminated counter, or a cabinet box that has racked out of square generally cannot be repaired to last; the repair fails again within a season. We tell you which case you’re in before you spend anything.
A single cabinet run or a counter replacement is typically a one- to two-day job once parts are on site. A full kitchen remodel in a Casita runs longer because of counter templating, backsplash work, and any permit inspection. We give you a schedule in writing and stick to it.
We identify your unit’s production run from the label plate, then either order the factory part or match a quality aftermarket equivalent to the measured opening. We don’t claim to carry Boxabl parts in stock or on a truck; we source what your unit actually needs and tell you the lead time up front. If the factory part is weeks out and an aftermarket fit works, you’ll hear that from us first.
If you’re in Dallas and your Casita kitchen needs attention, call (844) 797-4808 to schedule your free estimate. Background-checked, uniformed technicians on every job, and a 730-Day Done Right Promise behind the work.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.