Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Farmers Branch, TX: What It Takes and What It Costs
Concrete driveways and concrete work in Farmers Branch typically run $4,500 to $12,000 for a new driveway installation, with a full replacement at $5,000 to $14,000; most residential pours are finished in 3 to 5 working days, including demo, grading, and cure time. Call (844) 797-4808 and we’ll walk your slab, check the grade, and put a written line-item number in front of you before anything gets torn out.
What we do on a Farmers Branch driveway is not glamorous, but it’s the kind of work you only think about when it’s wrong: a slab that’s pitched toward the garage instead of the street, or a control joint that lets the whole pour crack in six months. Read on and you’ll know exactly what you’re paying for.
How We Pour a Concrete Driveway or Concrete Work in Farmers Branch – Stage by Stage
Every concrete job has a sequence, and the sequence is where the money either gets protected or wasted. Here’s the real version we run, day by day.
Day 1: Walk, measure, and mark the run
We start by walking the existing driveway and mapping the grade from the street back to the slab. That means checking where water currently drains, whether the city’s right-of-way or a utility easement sits under your driveway, and whether the apron at the curb has settled independently. You decide on the width (a standard two-car run is 16 to 20 feet wide), the driveway’s slope, and whether you want a widened apron or a separate walk. We leave with a written scope, not a verbal estimate.
Day 2: Demo, haul-off, and base prep
Old concrete gets broken out and hauled to a recycling yard – usually a half-day to a full day depending on thickness and rebar. Then comes the part you can’t see and shouldn’t skip: we grade and compact the subgrade, add a gravel base where it’s called for, and check for voids. On Farmers Branch’s Blackland Prairie clay, water that sits under a slab will find a way to heave it, so the base is where a good pour is won or lost.
Day 2 or 3: Formwork, reinforcement, and inspection
We set forms to grade, tie in rebar or wire mesh, and set the control joints so cracks fall where they’re supposed to. If your scope includes a turn-down at the curb or an attachment to existing concrete, we plan the joint there. If a permit and inspection are required, this is the stage the inspector sees – before the truck arrives, not after.
Day 3 or 4: Pour, screed, finish, and cut
Concrete goes down, gets screeded to grade, and comes to finish. Whether you want a broom finish, a light salt finish, or a smooth troweled apron is a call you make before pour day, not during it. Control joints get cut within 24 hours in this climate to give the slab a chance to crack where intended. A 15 to 25 yard pour typically takes one day for the pour and finish.
Day 5 to 7: Cure and walkthrough
Concrete reaches usable strength over 7 days and keeps curing for 28. You can usually drive on a driveway at around day 7, but we’d rather you wait the full stretch. We walk the finished run with you, point out the joints and any future maintenance, and hand over the written workmanship coverage. Anything off-spec on the final walk gets corrected.
The whole thing fits on a single visit for most jobs – one crew, one scope, one accountable number.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on a Concrete Job
Concrete is not one material. The choices below change the look, the price, and how the slab behaves in a North Texas summer. Pick with your eyes open:
- Broom finish vs. exposed aggregate vs. salt finish: broom is the standard, affordable, and slip-resistant option; exposed aggregate adds texture and hides stains but costs more and can be harder to pressure-wash; salt finish gives a subtle pitted look that handles heat well.
- 4-inch slab vs. 5 to 6-inch slab: standard residential driveways are 4 inches with wire mesh; a 5 to 6-inch pour with rebar handles heavier loads and reduces cracking over years of Texas sun. The thicker pour adds to the bottom line, but it’s the difference between one pour and two.
- Rebar vs. wire mesh: mesh is common and cheaper; rebar gives more structural continuity for a long driveway or where clay movement is aggressive. On a Farmers Branch lot with clay soil, we usually recommend rebar.
- Control joints vs. expansion joints: control joints guide where the slab cracks; expansion joints isolate the driveway from the garage slab or sidewalk. You’ll see both on a job that’s built to last.
- Color and stamping: integral color or a stamped pattern gives you a decorative surface without leaving the concrete family. It’s more expensive than a plain pour, but it’s a fraction of the cost of a paver upgrade.
If you’d rather see the full range of driveway surfaces, that’s covered in our Driveway & Pavers service – this page stays on the concrete side because a slab and a paver field are not the same decision.
What Concrete Driveways & Concrete Work Costs in Farmers Branch, TX
Here’s the number up front: a new concrete driveway installation in Farmers Branch runs $4,500 to $12,000. A full replacement, including demo and haul-off, runs $5,000 to $14,000. Those are real-market ranges, not teaser numbers.
What pushes a job toward the low end vs. the high end:
- Square footage: a single-car run is far cheaper than a wide two-car with an apron.
- Existing condition: a clean slab comes out fast; a cracked, heaved, or rebar-laced slab takes more time and more disposal.
- Base and grading work: if the subgrade is soft or the grade needs to be reworked for drainage, that adds labor.
- Reinforcement and thickness: a 6-inch rebar slab costs more than a 4-inch mesh slab.
- Permit and inspection scope: anything tied to city right-of-way or a new structure changes the paperwork and the timeline.
A written estimate from us lists each of these line by line – demo, base, forms, steel, pour, finish, disposal – so you can see exactly what’s included. What it usually won’t include is landscaping repair, sprinkler relocation, or anything outside the concrete footprint unless we’ve scoped it with you in writing. Our pricing is upfront and fixed: the number on the estimate is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Farmers Branch Homes Specifically Do to a Concrete Job
Farmers Branch is a built-out, inner-ring Dallas suburb along ZIP 75234, and that fact shapes every concrete pour we do here. There’s almost no new residential land left, so most of the work is renovation, additions, and rebuilds on mid-century ranch homes and small post-war cottages from the 1950s through the 1970s. The driveways on those homes were typically poured decades ago, often thin and without modern reinforcement, and many have settled against a garage slab that’s already shifted. That aging stock plus the city’s firm hand on permits for older properties means a driveway replacement is rarely just a driveway – it’s a chance to fix the grade, correct a drainage problem, and make the apron at the curb do its job. The Blackland Prairie clay under most of Farmers Branch swells and shrinks hard between drought and wet spring, so we grade and reinforce with soil movement in mind, not just the next rain.
If this driveway work is part of a bigger scope, it’s usually part of a full Driveway & Pavers in Farmers Branch project, and on a larger lot the same concrete decisions carry into a New Detached ADU in Farmers Branch. Homeowners often pair a new driveway with a Garage Conversion ADU in Farmers Branch so the driveway, apron, and utility runs are planned together instead of in three separate projects. We cover the whole city – see our Farmers Branch service page for the broader area we serve.
Serving Farmers Branch, TX – Our Local Coverage Area
We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Concrete Driveways & Concrete Work in Farmers Branch
Most residential driveways are finished in 3 to 5 working days, with cure time on top of that before you drive on it. Demo, grading, and base prep usually take a day or two, the pour and finish take one day, and joints get cut within 24 hours. Call (844) 797-4808 and we’ll give you a schedule pinned to your specific lot.
Permits depend on the scope: a driveway replacement on private property often doesn’t need one, but anything touching the city right-of-way, a new structure, or an addition does. Farmers Branch enforces codes firmly on older properties, so we confirm the permit requirement before we tear out anything. Call (844) 797-4808 and we’ll tell you what your specific job needs.
Sometimes, yes – an overlay pour works where the existing slab is sound and the height adds up correctly against the garage and street. Where the base has failed or the grade is wrong, an overlay just traps the problem underneath. We look at the slab before we recommend either way. Call (844) 797-4808 for a walkthrough and a straight answer.
A new installation runs $4,500 to $12,000, and a full replacement runs $5,000 to $14,000, depending on size, base condition, reinforcement, and permit scope. The estimate is line-item and fixed. Call (844) 797-4808 to schedule your free estimate.
Our work is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it’s backed in writing, not in a handshake. Call (844) 797-4808 and we’ll put the coverage in front of you before you sign anything.
Get a Free Estimate on Concrete Driveways & Concrete Work in Farmers Branch
Call (844) 797-4808 for a free on-site estimate on concrete driveways and concrete work in Farmers Branch. A live person answers, 24/7, and we’ll schedule a walk of your lot at a time that works for you. You’ll get a written, line-item quote with fixed pricing, no surprises, and the 730-Day Done Right Promise attached to the work. One crew, one scope, one accountable number.
Written by the team at Groundwork Construction Co.