Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Addison, TX: What the Job Really Costs and How Long It Takes
Replacing a vanity, re-tiling a bathroom floor or shower surround, and swapping fixtures in Addison, TX usually runs $9,000 – $28,000 for a full bathroom scope, with a vanity-only swap landing at $800 – $3,000 and tile work priced by the square foot. A straightforward vanity, tile and fixture package takes 5 – 10 working days once materials are on site. Most of the work is permitted through the Town of Addison building department. Call (844) 797-4808 for a free on-site estimate with line-item pricing.
How We Sequence Vanities, Tile & Fixtures: Day by Day
This isn’t a “we’ll be in and out” job, and anyone who tells you it is hasn’t done much tile work in Addison’s older apartment and condo stock. Here’s how the sequence actually runs.
Stage 1: Site check and measurements (day 1)
We measure the vanity alcove, check the drain and supply locations, and confirm whether the existing rough-in will work with the new cabinet depth. In Addison’s 1970s – 1980s multifamily units, this is where we find the surprises: off-center drains, cast-iron stub-outs, or a vanity that was framed into a wall that wasn’t built square. You decide the vanity size (standard 24″, 30″, 36″, 48″, or 60″ double) and rough fixture style at this stage.
Stage 2: Demo and backer prep (days 2 – 3)
We pull the old vanity, strip tile, and expose the substrate. If the wall behind the tile is drywall that got wet, it comes out and goes back as cement board. We set the waterproofing membrane on shower walls and floors at this point. You approve the tile layout and grout line before we set anything, because once it’s down, it’s down.
Stage 3: Tile set and cure (days 4 – 6)
Floor tile, then wall tile, then grout. Cure time is not negotiable. A 12″x24″ porcelain floor in a small Addison bath can be set in one day; a herringbone marble mosaic in a shower surround takes two. You’re choosing tile at Stage 1, not here, because ordering takes 3 – 7 days for anything not in stock.
Stage 4: Vanity and fixture install (days 7 – 8)
Vanity set and leveled, sink dropped in, faucet and drain connected, toilet reset, mirror and light hung, exhaust fan checked. If we’re moving a supply line or adding a GFCI outlet for a lighted mirror, that’s a licensed trade and adds a day.
Stage 5: Punch and inspection (days 9 – 10)
Grout haze cleaned, caulk lines run, towel bars and accessories set. If the scope triggered a permit, we schedule the Town of Addison inspection and don’t call the job done until it passes.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make: Vanities, Tile and Fixtures
Most of the price swing in this job comes down to five decisions. Here’s what each one costs you in money and maintenance:
- Vanity cabinet material: Stock MDF cabinets ($800 – $1,500 installed) are fine for a guest bath; plywood-box semi-custom ($1,500 – $3,000) is what we recommend for a primary bath in a humid North Texas climate.
- Countertop: Cultured marble is the budget pick and holds up well; quartz (Cambria and similar) runs higher but resists the etching that limestone and marble show within a year in a busy bath.
- Tile type: Porcelain is the workhorse – impervious, easy to clean, priced reasonably. Natural stone looks richer but needs sealing every 1 – 2 years. Ceramic is cheapest and fine for walls only.
- Tile size and pattern: Large-format tile installs faster and costs less in labor; a small hex mosaic or herringbone pattern adds 30 – 50% to labor because every piece is placed individually.
- Fixtures: Kohler and similar mid-tier faucets hold up 10+ years; big-box house brands often need a cartridge within 3 – 4. This is a $200 – $400 difference over the life of the bathroom.
We also work with CGI, CWS, and ES Windows on the material side when a bathroom refresh ties into a window or door replacement, so you’re not chasing three vendors for one room.
What Vanities, Tile & Fixtures Costs in Addison, TX
Expect $9,000 – $28,000 for a full bathroom scope that includes a new vanity, tile floor and shower surround, and new fixtures. A vanity-only replacement runs $800 – $3,000. Five variables push the number toward the high end:
- Square footage and tile area: A small hall bath at 35 sq ft of floor tile vs. a 100 sq ft primary bath with a curbless shower is a $4,000 – $8,000 difference in tile and labor alone.
- Plumbing relocation: Moving the drain or supply to fit a different vanity size is $600 – $1,800 and requires a licensed plumber.
- Electrical: Adding a GFCI, a lighted mirror circuit, or a heated floor circuit runs $400 – $1,200 depending on panel capacity.
- Substrate condition: Rotted subfloor or failed waterproofing under the old tile adds $800 – $2,500 in demo and repair.
- Permit scope: A like-for-like vanity swap generally doesn’t require a permit; moving plumbing, adding electrical, or re-tiling a shower pan does.
A written estimate lists tile square footage, tile and grout allowance, vanity and countertop line items, fixture brand and model, labor, disposal, and permit fees if applicable. What it typically excludes: hidden rot, structural repair, and any code upgrade the inspector flags after demo.
See the difference
Before
After
Before
After
Before
AfterWhat Addison’s Building Stock Does to This Job
Addison is nearly built out – ZIP 75001 is dominated by 1970s and 1980s apartment communities and office stock, with almost no new ground-up residential. That means the vanities, tile and fixtures work we do here is heavily weighted toward condo and apartment repositioning, tenant finish-outs, and refresh work on units that were last updated 20-plus years ago. The plumbing is often original cast iron or galvanized steel, and the tile is usually set on drywall with no waterproofing, which is why we budget for substrate replacement on most Addison jobs. Parking is the other reality: along Belt Line Road and Addison Road, staging materials means reserving a space or coordinating with property management, and we plan delivery windows around that, not around what’s convenient. North Texas heat and the occasional freeze cycle also stress exterior walls, so tile on exterior-facing walls needs a flexible membrane or it will crack. Homeowners here often pair a bathroom refresh with Tile Roofing in Addison or Specialty Roofing in Addison when storm damage has hit the building envelope.
If the bathroom is part of a larger project, see our Bathroom Remodeling in Addison page. For our full Bathroom Remodeling service, we cover the wider scope. We serve the whole Addison area, including nearby Carrollton, Farmers Branch, University Park, and Coppell.
Serving Addison, TX – Our Local Coverage Area
We serve Addison and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Addison
A standard bathroom refresh takes 5 – 10 working days once materials are on site. Tile and fixture work in a single bath typically runs 5 – 7 days; adding a shower pan and waterproofing pushes it toward 10. Material lead time (3 – 7 days for non-stock tile) is often the real schedule driver. Call (844) 797-4808 to get a firm timeline for your project.
A like-for-like vanity swap generally does not require a permit. Moving plumbing, adding electrical circuits, or replacing a shower pan does, and those permits are pulled through the Town of Addison building department. We pull the permits and schedule the inspections for you. Call (844) 797-4808 for a scope review.
Yes, and that’s the most common scope we do. If the new vanity fits the existing rough-in and the floor is sound, the job stays cosmetic and budget-friendly. Problems show up when the new vanity depth is different or the drain is off-center – that’s when a relocation cost appears. Call (844) 797-4808 and we’ll tell you before the estimate.
The full scope runs $9,000 – $28,000; a vanity-only job is $800 – $3,000. Tile grade, square footage, and any plumbing or electrical relocation drive the spread. Call (844) 797-4808 for an exact quote – estimates are free and line-item.
Every job is covered by the 730-Day Done Right Promise. If a tile pops, a grout line fails, or a fixture we installed leaks, we come back and make it right. The number you see on the estimate is the number you pay. Call (844) 797-4808 to get started.
Get a Free Vanities, Tile & Fixtures Estimate in Addison
Call (844) 797-4808 to schedule a free on-site estimate for vanities, tile and fixtures in Addison. A live person answers 24/7, and we’ll walk your bathroom, measure the rough-in, and hand you a written line-item quote with no change orders. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co.