Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Addison: What to Expect
Custom & Geometric Windows in Addison generally run $6,500 – $22,000 depending on shape complexity, glazing package, and how many openings you’re replacing. A single arch-top or trapezoid unit in a restaurant or apartment common area typically takes two to three weeks from template to install; a full set across a multifamily rehab runs six to eight weeks. Addison is built-out (ZIP 75001), so almost every job here is a commercial or multifamily retrofit squeezed between shared parking and Belt Line Road traffic. Call (844) 797-4808 for a free on-site estimate.
How we run a custom & geometric window project from template to final inspection
The sequence matters more on geometric work than on any standard replacement. Curved and angled units aren’t sitting on a shelf, so every stage has to happen in the right order or the schedule doubles.
Stage 1: Site survey and shape assessment (day 1, 2 – 3 hours). We measure the rough opening, check the existing frame for square and plumb, and photograph the reveal. On Addison restaurant and apartment projects, this is also where we record parking access, loading windows, and whether a lift or ladders will work. You decide at this stage whether we’re matching the existing geometry or rebuilding the opening.
Stage 2: Design and templating (days 3 – 10). For true radius, eyebrow, and trapezoid openings, a physical template or a laser-measured digital file goes to the manufacturer. You choose glazing (tempered, laminated, low-E), frame material, and finish color. This stage drives the lead time.
Stage 3: Ordering and permitting (weeks 2 – 4). Units get fabricated to the template. Simultaneously, we submit through the Town of Addison building department. Commercial and multifamily openings fall under different review than residential work, so plan for a review window rather than a same-week approval.
Stage 4: Demo and install (1 – 3 days per opening). We remove the existing sash and frame, prep the opening, set the new unit, shim and shim-check, flash the perimeter, and seal. Geometric units are heavier and harder to maneuver, so installers work in pairs and often need a clear staging area near the opening. On tight sites, that staging means a reserved parking bay or an alley approach.
Stage 5: Inspection and punch list (day after install). Final seal check, operation test on any operable sections, and a walk-through with you. If inspection is required, we meet the inspector on site.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between for geometric and custom windows
Most of the decisions happen in stages 2 and 3. Here’s what actually moves the product:
- Frame material. Aluminum is the standard for commercial storefronts and multifamily common areas because it takes powder-coat finishes and large spans; the trade-off is thermal performance, which needs a thermal break in North Texas summers. Vinyl handles simpler shapes at lower cost but struggles with large radii and dark colors. Wood-clad gives the best look on historic-feel facades and costs the most.
- Glazing package. Low-E with argon is the baseline for anything facing south or west; laminated glass adds impact and security performance, which matters on ground-floor openings. Simple clear glass is the cheapest and the wrong choice on a 100°F+ summer elevation.
- Shape complexity. A half-round or arch-top is straightforward. Eyebrow, trapezoid, triangular, and full-circle units require true custom fabrication and cost meaningfully more per square foot.
- Operable vs. fixed. Fixed units cost less and seal better. Operable awning and casement sections in custom geometry add hardware cost and a maintenance point.
- Finish. Powder-coated aluminum, anodized, or painted wood. Dark bronze and black powder coat are the most common choice around Belt Line Road; custom color matching adds lead time and cost.
We work with manufacturers including CWS, CGI, and ES Windows on custom and commercial-grade product, and can specify any of them based on the shape, span, and performance target you’re after.
What Custom & Geometric Windows costs in Addison, TX
Plan on $6,500 – $22,000 for a typical Addison project, with larger multifamily or restaurant scopes running higher. That’s the market range in this ZIP for combined product and installation.
The variables that push a job to the low or high end:
- Number and size of openings. A single arched transom runs near the bottom of the range; a storefront with three custom units plus surrounding standard windows sits at the top.
- Shape complexity. Straight-line custom sizes are the cheapest “custom” work. True radii, trapezoids, and multi-panel geometry add 25 – 50% to per-unit cost.
- Existing frame condition. Rotted or out-of-square frames mean rebuilding the rough opening before a new unit can go in. That’s framing labor, not window cost, and it’s the most common surprise line.
- Glazing and finish grade. Standard low-E vs. laminated impact-rated glass, and stock bronze vs. custom color, move the number in opposite directions quickly.
- Access and staging. On Addison’s tight shared-parking sites, lift rental, after-hours work windows, and traffic control add cost that a suburban driveway job never sees.
A written line-item estimate from us covers the units, templating, removal, installation, flashing and sealant, and the permit. It does not typically cover structural reframing discovered after demo, or interior repair and paint around the opening beyond basic trim. We call out those possibilities up front so the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Addison buildings specifically do to this job
Addison is an almost entirely built-out commercial and multifamily enclave, so custom and geometric window work here is usually retrofit work on 1970s – 1980s low- and mid-rise buildings along Belt Line Road and Addison Road, not new construction. That means every project goes through the Town of Addison building department, and multifamily and restaurant openings don’t always follow the same review path as a single-family replacement. Tight, shared-parking sites add a real constraint: on the Belt Line corridor, we plan loading and staging before the units even ship, because there’s no side yard to leave a crate of glass.
The buildings we most often see have envelope details that have aged through 40-plus years of 100°F+ summers and occasional freeze events. Framing out of square, failed perimeter sealant, and condensation between panes on south- and west-facing elevations are the standard failure modes. Interior commercial renovation and apartment repositioning drive most of the work, which also means finish-out deadlines and tenant schedules shape the plan. We cover all of Addison and coordinate around your tenants, your parking, and your hours.
Serving Addison, TX – Our Local Coverage Area
We serve Addison and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Custom & Geometric Windows in Addison
Most projects run six to eight weeks from signed estimate to final inspection, with fabrication as the longest single stage. Custom geometry drives that timeline more than installation does.
Yes, window replacement in Addison requires a permit through the Town of Addison building department. We pull it as part of the scope; you don’t file it yourself.
In most cases yes, if the new unit fits the existing rough opening. When shape or size requires enlarging the opening, structural work gets priced and permitted separately so you see it before we start.
Expect $6,500 – $22,000 for typical Addison scope, with shape complexity and existing frame condition as the two biggest swing factors. Call (844) 797-4808 for an exact quote, free on-site.
Every installation is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. Manufacturer warranty on the units sits separately and we walk you through both in writing.
Get a free on-site estimate for custom & geometric windows in Addison
Call (844) 797-4808 and a live person answers, day or night. We’ll set an on-site visit, measure and template your openings, and hand you a written line-item estimate with the permit, install, and product cost spelled out. No change-order surprises. If your job grows into a wider scope, that’s a conversation for our Windows & Doors in Addison page; if you’re refreshing a whole facade around the project, homeowners often pair this with Concrete Driveways & Concrete Work in Addison. For the full range of what our Windows & Doors team handles across the metro, see the service hub.
Written by the team at Groundwork Construction Co.