Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What a Full Bathroom Remodeling Project in Duncanville Actually Involves
A full bathroom remodeling in Duncanville usually runs $9,000 – $28,000 and takes 3 – 6 weeks of build time once the design is locked. “Full” means the room comes down to studs and subfloor: new tub or shower, new tile, new vanity, new toilet, new lighting and vent, and code-level plumbing and electrical work underneath. For an exact number on your bathroom, call (844) 797-4808 and we’ll schedule a free on-site estimate.
Key takeaways
- Full gut remodels in Duncanville run $9,000 – $28,000 depending on size and whether plumbing moves.
- Build time is typically 3 – 6 weeks; design and permitting add 1 – 2 weeks ahead of that.
- Homes built before the mid-1970s often need drain and panel work priced in before tile goes down.
- Every job is covered by our 730-Day Done Right Promise, and pricing is fixed in writing before work starts.
How We Run a Full Bathroom Remodel, Stage by Stage
There’s no mystery to a bathroom gut. There is a sequence, and when a crew skips a step you feel it two years later when a tile pops or a drain slows. Here’s how the job moves.
Stage 1: Design and material selection (days 1 – 10, before demolition)
We measure the room, talk through layout, and settle the fixtures first: tub or shower, tile, vanity, toilet, lighting. This is where you decide the big specs, because nothing on site moves until the fixtures are ordered. A tub takes a few days to arrive; specialty tile can take two weeks. We also pull the permit at this stage so the inspection calendar starts early.
Stage 2: Demolition and inspection of what’s underneath (days 1 – 3 of build)
Demo comes down to the studs and subfloor fast, usually in a day. Days 2 and 3 are the honest part: we open the floor and wall and see what Duncanville’s older housing stock actually has. Cast-iron drains, galvanized supply lines, a subfloor that’s soft from a slow leak – these show up now, not later. You get a written update before we go further.
Stage 3: Rough-in plumbing, electrical, and inspection (days 3 – 7)
New valve, new drain and vent, relocated outlets, GFCI protection, and a properly sized exhaust fan. The rough-in inspection happens before anything gets closed up. This is the step that eats time if the existing panel is full or the drain line is undersized – both common in homes from the 1950s and 60s.
Stage 4: Waterproofing, tile, and setting (days 7 – 21)
Backer board, waterproofing membrane, then tile. This is the longest stretch and the least visible. We set tile walls before the floor so the floor grid stays clean. Grout and sealant go on last. Inspect the waterproofing yourself before tile starts; it’s the one thing you can’t check after.
Stage 5: Fixtures, trim, and final inspection (days 21 – 35)
Vanity, toilet, tub or shower trim, lighting, mirror, paint, and a final walkthrough. You sign off on a punch list. Then the final inspection closes the permit. We hand you the warranty paperwork in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Be Choosing Between
A full bathroom remodel gives you real choices. Each one costs differently and holds up differently. Here’s the honest version of each.
- Tub or walk-in shower: a standard alcove tub is the cheapest install and the easiest for resale; a walk-in shower costs more but takes up the same footprint and suits households that never use the tub.
- Tile material: porcelain is the workhorse – durable, affordable, easy to clean. Natural stone looks better and costs 2 – 3x more, and needs sealing every year or two.
- Vanity grade: a stock vanity with a Delta or Moen faucet delivers the best cost-per-year; a semi-custom vanity with a quartz top adds $1,000 – $2,500 and holds a lot of storage in a small room.
- Fixtures – Moen and Delta: both run $150 – $450 per faucet. Moen’s cartridge design and Delta’s valve design are both proven, and parts are easy to source locally, which matters five years out.
- Toilet – American Standard: a standard 1.28-gallon gravity toilet is the sensible pick for most Duncanville homes; a pressure-assisted toilet adds $150 – $300 and handles low-flow situations but is louder.
- Ventilation: a properly sized Panasonic or Broan exhaust fan tied to a humidistat costs more up front and prevents the mold that builds up in North Texas summers.
What Full Bathroom Remodeling Costs in Duncanville, TX
The working range for a full gut of a standard 5×8 to 8×10 bathroom in Duncanville is $9,000 to $28,000. Most jobs land in the $14,000 – $20,000 band. What pushes a job to the low or high end:
- Size: a hall bath at 35 sq ft sits near $9,000 – $12,000; a primary bath at 100 sq ft runs $22,000 – $28,000.
- Existing condition: cast-iron replacement and subfloor rot push a job up $2,000 – $5,000.
- Relocating plumbing or structure: moving a drain or a wall adds $1,500 – $4,000; keeping the toilet and tub in the same spot saves that entirely.
- Material grade: porcelain tile vs natural stone, stock vs semi-custom vanity, entry-level vs premium fixtures all shift the total by thousands.
- Permit scope: adding a new fixture or moving a drain line means more inspections and more time.
A written estimate should line-item the demo, rough-in, materials, labor, permit, and the final inspection cost. It should also state what’s excluded: unknown foundation work, panel upgrades if the home needs one, and anything discovered after demo. Our pricing is upfront – the number you see is the number you pay – and projects over $10,000 get $1,000 off with 0% financing for 18 months available.
See the difference
Before
After
Before
After
Before
AfterWhat Duncanville Homes Specifically Do to This Job
Duncanville is largely built out, and nearly all the work here is renovation on 1950s – 1970s single-family ranch homes in ZIPs 75137, 75116, and 75138 – not new construction. That means the “full” in full bathroom remodeling usually includes opening up a slab that’s seen fifty-plus years of black clay soil movement, checking whether the original cast-iron drain under the floor is still holding, and confirming the electrical panel can carry a new GFCI circuit and vent fan. We price that discovery before demolition starts, not after. Neighborhoods like the blocks off Main Street and along Wheatland Road show identical patterns: cast-iron under the tub, original panel near capacity, and a subfloor that’s soft around the toilet flange. We see it weekly.
On the exterior side, homeowners often pair this with Roof Repair in Duncanville if the bathroom vent had been leaking, or Roof Replacement & Installation in Duncanville if the home is due. If your plans grow past the bathroom into something larger, this becomes part of Bathroom Remodeling in Duncanville alongside our Bathroom Remodeling service and our coverage across Duncanville.
Serving Duncanville, TX – Our Local Coverage Area
We serve Duncanville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Full Bathroom Remodeling in Duncanville
Most full bathroom remodels in Duncanville take 3 – 6 weeks of build time, plus 1 – 2 weeks for design, ordering, and permitting. A smaller hall bath hits the fast end; a primary bath with plumbing moves hits the long end. Call (844) 797-4808 for a timeline specific to your bathroom.
Yes – most full bathroom remodels in Duncanville require a permit, because replacing fixtures in place is one thing but new plumbing, new circuits, and structural changes are another. Your permit is a real line item on our estimate, and we manage the rough-in and final inspections. Call for a free estimate that includes permit cost.
Yes, and it’s how most Duncanville full bathroom remodels are done. Keeping the toilet, tub or shower, and sink in their current positions saves $1,500 – $4,000 and avoids extra time. Layout changes are worth doing when the room is badly configured, but a good remodel doesn’t need to move anything. Call (844) 797-4808 to talk layout options.
Full bathroom remodeling in Duncanville runs $9,000 to $28,000, with most jobs landing around $14,000 – $20,000. The variables are size, existing plumbing and electrical condition, material grade, and whether the layout changes. Call (844) 797-4808 for a written line-item quote – estimates are free.
Every full bathroom remodeling job we do is covered by our 730-Day Done Right Promise – if something isn’t done right, we make it right, for two full years after the job closes. Material manufacturer warranties stack on top of that. Call (844) 797-4808 and we’ll send the warranty terms in writing with your estimate.
Schedule Your Free Full Bathroom Remodeling Estimate in Duncanville
We’ll come to your home, measure the bathroom, look at what’s under the floor and behind the walls where we can see it, and hand you a written line-item estimate with a real number – not a ballpark. Calls are answered by a live person, 24/7, and our technicians are background-checked and arrive in uniform. Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available if the number is bigger than expected. Call (844) 797-4808 to schedule your free on-site estimate.
Written by the team at Groundwork Construction Co.