Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Lancaster, TX: What the Job Runs and What It Costs
A vanity, tile and fixtures update in Lancaster typically runs $9,000 – $28,000 when it’s part of a room rebuild, and most of that is labor and tile work, not the vanity itself. A single vanity swap with new tile and fixtures usually takes 3 – 7 working days; a full floor-to-ceiling tile job with a relocated vanity runs two to three weeks. Call (844) 797-4808 for a free on-site estimate. We walk the room, check your cabinet box and wall substrate, and put the number in writing before anything gets demoed.
How We Handle Vanities, Tile & Fixtures, Stage by Stage
This isn’t a “we handle everything” job. Each stage below has a decision attached to it, and knowing who decides what and when is the difference between a clean install and a rework.
Stage 1 – Walkthrough and measuring (day 1)
We measure the vanity wall, check the existing cabinet box for level and rot, and trace the supply lines and drain. If you’re on a slab, we confirm where the drain stub actually sits, because blackland clay soil movement can throw a floor out of level over time. You leave this stage knowing whether your plumbing can stay where it is or needs to move, which is the single biggest cost swing on the job.
Stage 2 – Demo and prep (days 2 – 3)
Old tile, the vanity top, and any failing backerboard come out. We set new cement backerboard on walls and floors and waterproof the wet areas before a single tile goes down. This is the stage people skip and regret; tile over greenboard fails in a North Texas bathroom within a few summers. You decide nothing here. We do the prep and you get photos of it.
Stage 3 – Rough-in and inspection (days 3 – 4)
If the vanity moved or the drain shifted, we rough in the new plumbing and electrical (a vanity outlet, a lighted mirror, an exhaust fan) and pull the permit if the scope requires it. The city inspects the rough-in before tile covers it. You confirm fixture placement and outlet locations at the start of this stage so nothing gets cut twice.
Stage 4 – Tile and fixtures (days 4 – 10)
Floor tile goes down first, then wall tile, then grout and seal. The vanity cabinet sets, the top goes on, the sink and faucet connect, and the mirror and lighting go in. You choose grout color and layout (running bond, herringbone, stacked) at the start of demo so the tile order is ready. Fixture brand and finish get locked before stage 3 because lead times on special-order finishes can stretch.
Stage 5 – Final walkthrough (day 10 – 14)
We test every valve and drain, check the grout lines and caulk joints, and confirm the vanity is level and the doors close true. You get the warranty paperwork and a punch list runs to zero before we call it done. Everything here is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Vanity, Tile and Fixture Options You’ll Choose Between
What you pick drives price more than anything else. Here’s the honest trade-off on each.
- Stock vs. semi-custom vanity cabinet – A stock box lands at the bottom of the $800 – $3,000 vanity range but limits widths to standard sizes. A semi-custom box lets you fit an odd wall and choose drawer configuration; it’s worth it if your space is off-standard. KraftMaid is a name we work with regularly for this.
- Vanity top material – Cultured marble is the budget pick and holds up fine. Quartz and solid surface resist staining better and take a undermount sink cleanly. We source Kohler and Cambria for tops where the budget allows.
- Floor tile: porcelain vs. ceramic vs. natural stone – Porcelain is the workhorse; dense, water-resistant, and priced well. Ceramic is cheaper but chips and wears faster under traffic. Natural stone (travertine, marble) looks the part but needs sealing and shows every drop of North Texas hard water. On blackland clay slabs, a stone floor demands a flat substrate or it cracks.
- Wall tile and layout – Subway in a running bond is the cost floor. Herringbone or a large-format tile with few grout lines costs more in labor because of cutting and layout time. Large-format tile also needs a flatter wall.
- Fixtures – Moen and Delta faucets are a solid mid-tier with parts on the shelf at most supply houses. American Standard toilets and sinks are reliable workhorses. Specialty finishes (brushed gold, matte black) can add lead time and a premium.
What Vanities, Tile & Fixtures Costs in Lancaster, TX
The full range for this work in Lancaster is $9,000 – $28,000. What pushes a job to the low end versus the high end comes down to five things:
- Scope and tile area – A vanity wall and floor tile sits near $9,000. Floor-to-ceiling tile, new shower surround, and a full fixture package climbs toward $28,000.
- Moving plumbing or electrical – Keeping the drain and supply where they are saves real money. Relocating a vanity to the opposite wall, or adding an outlet and exhaust fan, adds rough-in labor and possibly a permit.
- Substrate condition – Rotted subfloor, failed backerboard, or a slab that’s out of level adds demo and prep time.
- Material grade – Stock cabinet and ceramic tile at the bottom; semi-custom cabinet, quartz top, and large-format porcelain at the top.
- Permit scope – A cosmetic refresh may not need one. Moved plumbing or electrical does, and that adds inspection time.
Every Groundwork estimate is line-item written, with upfront pricing and no surprises – the number you see is the number you pay. We don’t do change orders that appear after demo. Financing is available at 0% for 18 months, and projects over $10,000 take $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat Lancaster Homes Specifically Do to This Job
Lancaster sits at the fast-growing southern edge of Dallas County along I-35E, where former ranch and farmland is being converted into new subdivisions even as the older 75146 blocks near the historic downtown hold mid-century homes. That split matters for a vanity and tile job. In the postwar stock, we regularly find cast-iron drains at the end of their life, greenboard where backerboard should be, and slab floors that have shifted with the clay soil. In the newer builds spreading outward, the room is generally sound but the finishes are builder-grade, and homeowners are upgrading to semi-custom cabinets and larger tile. Lots carved from former farmland can still carry old agricultural drainage or septic records, which we verify before a permit gets pulled. Tile work in both cases has to anticipate the soil movement and summer heat that drive cracks. If your project grows into a full room rebuild, that’s covered on our Bathroom Remodeling in Lancaster page, and homeowners often pair the upgrade with Tile Roofing in Lancaster once they’re already scheduling trades. We handle Lancaster jobs across both ZIP codes, 75146 and 75134, and nearby Glenn Heights, DeSoto, Duncanville, and Cedar Hill.
Serving Lancaster, TX – Our Local Coverage Area
We serve Lancaster and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Lancaster
A vanity swap with new floor and some wall tile takes 3 – 7 working days. A full floor-to-ceiling tile job with a relocated vanity runs two to three weeks, with rough-in inspection time added if the scope requires a permit. Call (844) 797-4808 and we’ll give you a schedule with your estimate.
Cosmetic tile and a straight vanity swap usually don’t require one. Moving plumbing, adding electrical, or changing the footprint does, and the city inspects the rough-in before tile covers it. We pull the permits and pass the inspections as part of the job, and we’ll tell you upfront whether yours needs one.
Yes, and it’s the most common way to hold the budget down. Keeping the drain and supply lines where they sit keeps the job near the low end of the $9,000 – $28,000 range. We measure the existing rough-in on day one and confirm what can stay before demo starts.
Expect $9,000 – $28,000 depending on tile area, cabinet grade, and whether plumbing or electrical moves. A basic vanity and floor refresh sits near $9,000; a full-room tile and fixture package climbs toward $28,000. Call (844) 797-4808 for an exact quote – estimates are free.
Every project is covered by our 730-Day Done Right Promise. If anything we installed isn’t right, we make it right within that window. Fixture manufacturers like Moen and Delta carry their own product warranties on top of that.
Get a Free Estimate on Vanities, Tile & Fixtures in Lancaster
We’ll come out, measure the room, check your cabinet box and substrate, and hand you a written line-item estimate for vanities, tile and fixtures in Lancaster – free, with no pressure and no vague numbers. Our technicians have up to 12 years of experience, and every one is background-checked and arrives in uniform. Call (844) 797-4808 to schedule yours. A live person answers, day or night.
Written by the team at Groundwork Construction Co.