Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fence Repair in Lancaster, TX: What It Costs and How Fast It Gets Fixed
Fence repair in Lancaster, TX runs $350 – $1,800 for most single-run jobs, and the wide range is real: a loose post reset on a 75146 lot is a couple hundred dollars, while replacing a storm-toppled stretch of privacy fence along an open acreage line can land near the top. Straightforward repairs are usually measured in days, not weeks, and we quote them in writing before anything gets touched. Call (844) 797-4808 for a free on-site estimate and a number that doesn’t move once work starts.
How We Handle a Fence Repair in Lancaster, Start to Finish
Most contractors skip straight to a bid. We walk the whole fence line first, because on Lancaster properties the failure is rarely where the homeowner thinks it is. Here’s the actual sequence.
Stage 1: The line walk and diagnosis (day 1, 45 – 90 minutes)
We take a slow pass along every panel, post, gate and corner, not just the section that’s visibly leaning. On larger lots out toward the I-35E growth corridor, that means checking for full-line lean and hidden post rot that a homeowner standing at the front gate never sees. You’ll get a marked-up plan of what’s failing and why. This is the stage where we tell you honestly whether you’re looking at a repair or a replacement.
Stage 2: The written scope and your first decision (day 1, same visit)
You leave the walk with a line-item scope: how many posts, how many panels, exact materials by grade, and the price for each. Your decision here is how far to go. We’ll often recommend replacing the two panels on either side of a failed section rather than one, because a single new panel against weathered pickets looks patched and stresses the neighbors. You choose the scope; we don’t pad it.
Stage 3: Teardown and post work (day 2, 3 – 6 hours)
Failed pickets and rails come down first. Posts are where the real labor lives: if a post footing has heaved out of blackland prairie clay, we pull the old concrete, re-set the post, and re-pour. On acreage properties we’re often resetting posts on runs that were originally set shallow, which is why they lean first. The bulk of the job happens in this window.
Stage 4: Rebuild and material match (day 2 – 3, 3 – 5 hours)
New rails, pickets and posts go in, and we match existing picket profile and height as closely as stock allows. If you’re replacing a whole run and your current fence is an aged brown, we’ll usually advise replacing that full continuous run for a clean line rather than trying to color-match weathered wood. Cedar and treated pine weather differently, so a patch of the wrong species shows up within a season.
Stage 5: Gate re-hang, final walk, and sign-off (day 3, 30 – 60 minutes)
Gates get re-hung and adjusted so they swing and latch cleanly, which is its own small job after a post reset. We walk the line with you, check the hardware and bracing, and document the finished work for the 730-Day Done Right Promise. If anything in the scope needs a follow-up, we schedule it before we leave.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on a Lancaster Fence Repair
Repair is not one product. What you pick here decides how the fix holds up through our wet-dry clay swings and spring wind.
- Cedar vs. treated pine pickets: Cedar costs more per linear foot but resists rot and holds its color in North Texas heat. Treated pine is the budget path and a fine match when you’re patching into an existing treated-pine run.
- Reset existing post vs. new post and footing: Resetting a sound post is the cheap option. A full new post with a deeper concrete footing costs more but is the right call on any post that’s already heaved once.
- Concrete footing depth: Deeper footings cost more up front and are the single biggest factor in keeping a repaired line straight through Lancaster’s expanding soil.
- Metal post and rail inserts: Galvanized steel posts and rail stiffeners cost more than wood but hold a line straight far longer, which matters on long acreage runs.
- Hardware and gate kits: Heavy-duty hinges, self-closing hardware and proper bracing add a modest amount and are what actually fail on gates, not the pickets.
New construction planning is different from repair, so if you’re starting fresh, see our Fence Installation service and the full Fence Installation in Lancaster page for ground-up scope.
What Fence Repair Costs in Lancaster, TX
Expect $350 – $1,800 for most repairs, with the bulk of jobs landing between $600 and $1,100. A whole-run rebuild pushed by storm damage can run higher and we’ll quote it line by line before you commit.
| Repair | Typical Range |
|---|---|
| Loose post reset (single) | $150 – $400 |
| Picket and rail patch (per section) | $200 – $500 |
| Gate re-hang and hardware | $200 – $450 |
| Full post-and-footing replacement | $300 – $650 |
| Storm-damaged run rebuild | $900 – $1,800+ |
What pushes a job toward the high end? The number of posts failing rather than panels (post work is labor-heavy), whether we’re re-pouring footings in heavy clay, the material grade you choose, gate hardware upgrades, and whether a repair touches an easement or property line that needs verifying. What’s included in a written estimate: materials, labor, haul-away and cleanup, and the 730-Day Done Right Promise. Not included: full replacement of a fence beyond repair, or permitting on a rebuild that crosses into new-construction scope.
See the difference
Before
After
Before
After
Before
AfterWhat Lancaster’s Lots and Soil Do to a Fence Repair
Lancaster sits at the southern edge of Dallas County, where former ranch ground along the I-35E corridor is turning into subdivisions while older 75146 blocks hold mid-century homes. That split matters for fence repair. On the older blocks near the historic downtown core, we routinely find posts set shallow decades ago that have finally heaved out of blackland prairie clay after a wet spring, and pickets gone soft at the base from our heavy summer rain followed by dry baking heat. On the newer builds spreading outward, repairs are more often storm and wind related, with spring hail and high winds snapping rails and popping gates. And on lots carved from former farmland, an old agricultural drainage line or an inherited utility easement can run right under a fence line, which means we verify before we dig a new footing this close to a boundary. We cover all of it under Lancaster.
Serving Lancaster, TX – Our Local Coverage Area
We serve Lancaster and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Fence Repair in Lancaster
Most fence repairs are finished in one to three days, and single-post or gate jobs are often done in a morning. Multi-post footings and larger storm-damaged runs on acreage properties are what stretch it to a second or third day. Call (844) 797-4808 and we’ll give you a realistic window once we’ve walked the line.
Simple repairs to an existing fence line generally don’t need a permit, but a full run rebuild or a fence near a property or easement line can trigger one, and the newer lots carved from farmland sometimes have site records worth checking. We confirm what applies before work starts so nothing gets flagged later.
Yes, in most cases, and that’s usually the smarter spend. If only two or three posts and a few panels are failing, we patch and reset rather than tear out a sound line. We’ll tell you straight if a repair won’t hold and replacement is the honest answer.
Most Lancaster fence repairs fall between $350 and $1,800, with the typical job in the $600 – $1,100 range depending on how many posts and panels need work and the materials you choose. Call (844) 797-4808 for an exact quote; estimates are free.
Every repair we do is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers the workmanship on posts, rails, pickets and gates for two full years. Call (844) 797-4808 to schedule your free estimate.
Get a Free Fence Repair Estimate in Lancaster
Call (844) 797-4808 and a live person answers, day or night. We’ll set a time to walk your fence line, hand you a written line-item scope, and price the repair before anything gets touched. Upfront pricing, no surprises, backed in writing. If the repair is part of a bigger exterior project, or you’re planning something like a ADU Design & Permitting in Lancaster or a Garage Conversion ADU in Lancaster that shares a boundary line, the same crew can look at it on the same visit.
Written by the team at Groundwork Construction Co.