Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Glenn Heights, TX: What the Job Actually Involves
Cabinets & Countertops in Glenn Heights, TX typically run $14,000 – $45,000 for a full kitchen’s worth of both, and most jobs are finished in two to three weeks from demo to final caulk. You’re replacing the boxes and the top surface together, which means one crew owns the fit between them. Call (844) 797-4808 and we’ll walk your kitchen and give you a written, line-item number before anything gets ordered.
How the Job Runs, Stage by Stage
Cabinet and countertop work is a sequencing problem more than a building problem. Get the order wrong and you’re paying for a second template or a second trip. Here’s how we run it in Glenn Heights.
- Stage 1: Measure and layout (day 1, about 2 hours). We template the room, check wall plumb and floor level, and mark every appliance and outlet. You decide the cabinet door style and the countertop material at this stage, because lead times drive the whole schedule. This is also when we flag anything that needs a plumber or electrician.
- Stage 2: Demo and prep (days 2 – 3). Old cabinets and tops come out, we cap or move the water and gas lines if the sink or range is shifting, and we patch and level the wall behind the old backsplash line. A straight, level wall is what makes new cabinets sit flush without filler strips everywhere.
- Stage 3: Cabinet install (days 4 – 6). Base boxes first, then uppers, leveled and shimmed, scribed to the wall. You confirm hardware placement before we drill. Doors and drawers go on last so they don’t get knocked around while the top is set.
- Stage 4: Countertop template and install (days 7 – 12, depending on material). Stone gets templated after the cabinets are set, then fabricated, then installed – usually a 5 to 10 day gap. Laminate or butcher block can go in the same week. Sink cutouts and faucet holes are done at fabrication, not on site.
- Stage 5: Backsplash, hookups, punch list (days 13 – 16). Sink, faucet, disposal and dishwasher reconnect, then the final walkthrough where you open every drawer and we check every seam. The full sequence is what you’re paying for when you hire one contractor instead of three.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Matter
Most homeowners spend their time on door color and not enough on the two decisions that drive cost and longevity: the box construction and the countertop material. Here’s the honest trade-off on each.
- Cabinet boxes: plywood vs. particleboard. Plywood sides and shelves hold screws better and survive a plumbing leak; particleboard is cheaper and common in builder-grade stock. Ask what the box is made of before you compare two quotes that look identical.
- Door style and material. Painted MDF shaker is the value pick and looks sharp for a decade in a dry kitchen, while solid wood and thermofoil each have their own failure modes – wood moves with humidity, thermofoil peels at the edges over time.
- Countertop: quartz vs. granite vs. laminate. Quartz is non-porous and needs no sealing, granite is natural stone that wants a reseal every year or two, and laminate is the budget answer at a fraction of the price with a shorter lifespan. A quality brand like Cambria sits at the top of the quartz tier and you’ll feel the difference in the edge profile.
- Drawer hardware and soft-close. Undermount soft-close slides are worth the upgrade on the drawers you use daily. It’s a small line item that changes how the kitchen feels.
- Sink and faucet. An undermount sink requires the countertop fabricator to cut and polish the edge, an overmount doesn’t. That single choice moves the countertop line by a few hundred dollars.
What Cabinets & Countertops Cost in Glenn Heights, TX
The full range for this work in Glenn Heights lands between $14,000 and $45,000. A modest galley with stock cabinets and laminate sits near the bottom; a large open kitchen with semi-custom boxes, quartz, an island and a relocated sink pushes toward the top. Here’s the line-item breakdown we use in written estimates.
| Line item | Glenn Heights range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Full kitchen remodel (when paired) | $14,000 – $45,000 |
Five things push a job toward the high end: the linear feet of cabinet run, whether the sink or range has to move (plumbing and electrical), the countertop material grade, whether an island is added, and whether the job is part of a Kitchen Remodeling in Glenn Heights scope that also touches flooring or lighting. A written estimate should list cabinet brand and box material, countertop material and square footage, demo and haul-away, sink and faucet reconnect, and the warranty. What it usually doesn’t include: appliance purchases, new flooring, and any drywall or electrical repair found once the old cabinets come off the wall.
See the difference
Before
After
Before
After
Before
AfterWhat Glenn Heights Homes Do to This Job
Glenn Heights is a small bedroom city on the IH-35E corridor between Dallas and Waxahachie, and much of its housing stock is recent – tract subdivisions of brick-veneer homes built through the 2000s and 2010s, mixed with older rural-style houses on wide lots. That mix changes the work. In the newer subdivisions off the corridor, we’re usually replacing builder-grade cabinets that were installed with the house, so the wall behind them is flat and the plumbing is already in the right place – a clean swap. On the older acreage tracts, we open a wall and find whatever the last remodel left behind, which is where the estimate needs a contingency. The North Texas clay under most of Glenn Heights moves with the seasons, and a foundation that has shifted a fraction of an inch will show up as a countertop seam that doesn’t line up, so we check floor level before we order anything. We cover all of Glenn Heights, and if your job is part of a larger scope, our Kitchen Remodeling service handles the wider project. Homeowners often pair this work with Walk-In Showers & Shower Remodeling in Glenn Heights so the whole house gets refreshed in one stretch, and we’re glad to quote both at once. See our Glenn Heights service page for what else we do here.
Serving Glenn Heights, TX – Our Local Coverage Area
We serve Glenn Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Cabinets & Countertops in Glenn Heights
Two to three weeks from demo to final walkthrough, and the stone countertop template-to-install gap is the single biggest variable. Call (844) 797-4808 for a schedule built around your material choice.
Usually not for a straight swap of like-for-like cabinets and tops, but any change to plumbing, gas or electrical – moving a sink, adding an outlet for a new range – typically pulls a permit and an inspection. We tell you which side of that line your job falls on before work starts.
Yes, and that’s the most common way we do it – new boxes and tops in the same footprint keeps the price near the bottom of the range. Keeping the sink and range where they are avoids the plumbing and electrical line entirely.
Between $14,000 and $45,000 for a full kitchen’s worth of both, with a straight cabinet swap at $4,000 – $13,000 and countertops at $2,000 – $6,500 as line items. Call (844) 797-4808 for an exact quote – estimates are free.
Every cabinets and countertops job we do is covered by our 730-Day Done Right Promise – if it isn’t done right, we make it right. The material brands carry their own manufacturer warranties on top of that.
Get a Free Cabinets & Countertops Estimate in Glenn Heights
Call (844) 797-4808 and a live person answers, any hour, any day. We’ll set a free on-site estimate, measure your kitchen, and hand you a written, line-item quote with cabinet and countertop options at each price point. No pressure on the call, no surprises on the invoice. Financing at 0% for 18 months is available, and projects over $10,000 take $1,000 off.
Written by the team at Groundwork Construction Co.