Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Glenn Heights, TX
Custom & Geometric Windows in Glenn Heights usually run $8,000 – $25,000 for a whole-house impact-rated package or $4,500 – $15,000 for a partial replacement, and most jobs take three to six weeks from template measurement to final inspection. The work covers arched, trapezoidal, triangular, and radius units cut to fit, plus the reinforcement and anchoring a wind event will test. Call (844) 797-4808 for a free on-site measure and a written, line-item quote.
How a custom and geometric window job actually runs, stage by stage
Geometric units are not stock items, so the schedule matters more than the showroom. Here’s the real sequence we run in Glenn Heights, and what you’re deciding at each point.
Day 1: measure, template, and confirm the opening
We template every opening with a rigid pattern or laser measurement, not a tape-and-guess. A true arch or trapezoid has to match the rough opening within a fraction of an inch, because there’s no trim wide enough to hide a bad curve. You decide the glazing package here: impact-rated laminated glass versus standard insulated glass with separate reinforcement. This visit takes two to three hours for a full house.
Week 1 – 2: fabrication and permit
Custom shapes are built to order. Typical lead time is three to five weeks for arched and radius units, and we file the window permit in that window since the schedule doesn’t depend on it. You sign off on the final elevation drawings and glass spec before anything is cut.
Week 3 – 5: demo and prep
We pull the old units, check the framing for rot or movement, and address any structural gaps before setting new frames. Geometric openings often need a header or curved buck built or squared up. That structural prep is where schedule slips happen on older homes, and we tell you at measure time if we expect it, not after demo.
Install days: setting, flashing, sealing
Each unit gets set plumb and square, then flashed and sealed with a proper weather-resistive barrier detail. Wind-driven rain is the failure point in North Texas, so the flashing and sealant work get as much attention as the glass. Impact-rated units also get anchored to the framing per the manufacturer’s wind-load schedule.
Final walk and inspection
We check operation, verify every lock and hinge, clean the glass, and walk the job with you. The permit inspection closes out the file. Our workmanship is covered by the 730-Day Done Right Promise, so if a seal or a frame detail fails inside two years, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll weigh before we order
- Impact-rated laminated glass vs. standard insulated glass. Impact units cost more up front but resist wind-borne debris and don’t need shutters in most wind zones. Standard units suit homeowners who want the look without the full storm package, and both work with a geometric layout.
- Frame material: vinyl, fiberglass, or aluminum-clad wood. Vinyl is the value pick and handles the curves well. Fiberglass holds a tighter profile and resists heat movement better. Aluminum-clad wood gives the cleanest custom shape and finish but costs more and needs more care on the exterior.
- Arched vs. segmented vs. true radius. A segmented arch is built from angled panes and costs less. A true radius curve is a single bent unit and shows a smoother line, but the price and lead time climb fast. We show both options at measure so you’re comparing real numbers.
- Finish and hardware. Standard colors ship faster; custom exterior colors and interior wood finishes add weeks. Window hardware and muntin patterns are a finish choice, not a structural one, and worth deciding early so the order doesn’t sit.
- Brand and warranty terms. We work with Andersen and Marvin for custom shapes and a range of impact systems. The trade-off is warranty depth and service network versus price. We’ll line up the terms so you can see what each one actually covers.
What Custom & Geometric Windows cost in Glenn Heights, TX
A full-house impact-rated geometric package here lands roughly $8,000 – $25,000. A partial replacement of a few arched or trapezoid units runs $4,500 – $15,000. Those are the ranges you should plan around, and the number inside them depends on a handful of specific variables, not vague “pricing varies.”
| Line item | Typical range |
|---|---|
| Impact window installation (full package) | $8,000 – $25,000 |
| Window replacement (partial / standard shapes) | $4,500 – $15,000 |
| Structural framing or curved buck prep | quoted per opening |
What moves the number: the count and size of true-radius versus segmented units; whether the existing framing is sound or needs a header and squaring; the glass package, with impact-rated laminated glass adding cost over standard insulated glass; custom exterior color or interior wood finish; and permit and inspection scope, which grows with any structural change.
What a written estimate includes: measure and template, fabrication of each unit, framing and structural prep where needed, flashing and sealing, permit filing, and final inspection. What it typically doesn’t: exterior painting or siding patching around the opening, interior trim if you want something non-standard, and lead-safe handling on pre-1978 homes. We spell out each of those on the quote so nothing shows up as a surprise change order, and pricing is no-hassle upfront. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat Glenn Heights homes specifically do to this job
Glenn Heights sits on some of the most active expansive clay in North Texas. That blackland prairie soil swells and shrinks hard between wet and dry seasons, and slab-on-grade homes here move with it. When a house shifts, window openings go out of square, and a geometric unit that was ordered to a tight template suddenly doesn’t fit. That’s why we template from the actual opening, not the original plan, and it’s why a curved unit on a settled slab needs the framing squared before the new one goes in. We also see this in the newer tract subdivisions off the IH-35E corridor and around the Bear Creek and Ovilla Road areas, where brick-veneer homes built in the 2000s-2020s are now at the age where seals and frames show their first cracks. Wind-load resilience is the real reason most homeowners call: a failing frame or a lost seal is the weak point before a spring storm. Because so much of Glenn Heights is recent infill construction on former farm and ranch land, we also run into old tank, fence, and ag debris during foundation and drainage work, which tells us what to expect when we dig into the framing around an opening. We cover all of Glenn Heights for this work.
Serving Glenn Heights, TX – Our Local Coverage Area
We serve Glenn Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Custom & Geometric Windows in Glenn Heights
Plan on three to six weeks overall. The fabrication lead time for arched and radius units is the biggest share, typically three to five weeks, with install days following. Call (844) 797-4808 for an exact timeline on your openings.
Yes, window replacement generally requires a permit, and any structural change to an opening adds inspection scope. We file the permit and manage the inspection as part of the job, and the estimate states the permit cost up front. Call (844) 797-4808 to confirm what your address needs.
Often yes for a like-for-like swap where the framing is sound and the new unit matches the original opening. If the framing is rotted, out of square, or needs a header for a larger radius, structural prep is required and gets quoted before work starts.
A full-house impact-rated package typically runs $8,000 – $25,000, and a partial replacement of a few custom units runs $4,500 – $15,000. The count of true-radius units, glass package, and framing condition drive where you land. Call (844) 797-4808 for a free written quote.
Our workmanship is covered by the 730-Day Done Right Promise, and the window units carry their own manufacturer warranty. We hand you both sets of terms in writing before install. Call (844) 797-4808 with any warranty question on your order.
This is part of a full Windows & Doors in Glenn Heights scope for many homeowners, and if you’re also planning exterior work, our Windows & Doors service covers the wider picture. Storm damage often takes out more than glazing, so some folks pair this with Concrete Driveways & Concrete Work in Glenn Heights or Asphalt Driveways & Resurfacing in Glenn Heights where a fallen limb or runoff has chewed up the driveway.
Get a free estimate on your custom and geometric windows
Call (844) 797-4808 to schedule a free on-site estimate in Glenn Heights. We’ll measure every opening, show you the impact-rated and standard options side by side, and hand you a written, line-item quote with the permit spelled out. A live person answers around the clock, so you’re never stuck leaving a voicemail.
Written by the team at Groundwork Construction Co.