Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in Glenn Heights, TX: What It Takes and What It Costs
An iron fence in Glenn Heights usually runs $3,500 – $9,000 for a typical residential lot line, and most jobs wrap in two to four working days once materials are on-site. That covers layout, excavation, concrete footings, panel setting, and finishing. The number lands where it lands because of linear feet, height, and how much of your property sits on the blackland clay that makes footing work a real part of the job here. Call (844) 797-4808 for a free on-site estimate before you commit to a single post location.
How We Build an Iron Fence, Stage by Stage
Iron fencing gets ruined by shortcuts taken in the first two hours. Here’s the order we work in and what you’re deciding at each point.
Stage 1: Layout and utility locate (day 1, morning)
We walk the line with you, mark every corner and gate, and confirm setbacks against your plat. We call in the 811 locate before anyone breaks ground, because Glenn Heights infill lots carry old farm lines and buried ag debris more often than most people expect. You decide gate placement and swing direction now, not later. Moving a gate after footings cure means cutting concrete. That decision happens on day one.
Stage 2: Excavation and footings (day 1, afternoon)
Posts get set in concrete footings sized to your fence height and wind exposure. On the expansive clay through this part of the corridor, footing depth and drainage matter more than they would on stable soil. We bell the footings and set them below the shrink-swell active zone. You’re not deciding anything here. You’re watching us do the part most crews rush.
Stage 3: Cure time (24 – 48 hours)
Concrete needs to set before we hang anything heavy on it. This is dead time on your calendar and there’s no honest way around it. We use it to stage panels, verify gate hardware, and touch up any shop finish on site.
Stage 4: Panel and gate installation (day 2 or 3)
Rails, pickets, and gates go up in sequence. You confirm the gate latches and self-closes to your satisfaction before we call it done. This is the day you’ll want to be home for the final walk-through.
Stage 5: Finish, punch list, and sign-off (day 3 or 4)
We touch up welds and finish, clear debris, and walk the whole run with you. Any issue on that walk gets fixed before we pack up. Your written workmanship coverage starts here.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Iron isn’t one product. Here’s what moves the look, the cost, and the lifespan.
- Wrought iron vs. steel. Traditional wrought iron is forged and genuinely heavier, with a price to match. Steel or tubular steel is what most residential jobs in Glenn Heights use: lighter, still strong, and easier to repair. Ask which one you’re being quoted.
- Height. 4-foot is common for property lines; 5- and 6-foot runs cost more per foot in both material and footing size. Pool enclosures and pet containment push toward taller.
- Finish. Powder-coat is the standard and holds up well in North Texas sun. Galvanized-then-powder-coated steel resists rust longer and costs more upfront. Bare or shop-primed iron will need repainting, and that’s a real ongoing cost.
- Picket spacing and style. Tight picket spacing costs more in material. Decorative finials, scrollwork, and custom panel designs are priced per piece and can add meaningfully to a run.
- Gate type. A walk gate is simple. A double drive gate with a drop rod and heavy hinges is a bigger fabrication item. If you want an automatic opener, plan for it before footings set.
What an Iron Fence Costs in Glenn Heights, TX
Residential iron fencing here lands between $3,500 and $9,000 for most lots. The low end is a shorter, standard-height steel run with a single walk gate. The high end is a long perimeter, taller panels, decorative detail, and heavy drive gates.
Five things push the number up or down:
- Linear feet. The single biggest driver. A half-acre corner lot has far more fence line than an interior lot.
- Height and gauge. Taller and thicker means more steel and bigger footings.
- Gate count and type. Each gate is fabricated and hung separately. Drive gates cost several times what a walk gate does.
- Site conditions. Rocky ground, old buried debris, or a line that crosses a drainage swale all add excavation time.
- Finish. Powder-coat is standard. Galvanized-plus-powder is an upgrade with a longer rust window.
A written line-item estimate from us spells out linear feet, height, finish, gate count, footing spec, and cleanup. It doesn’t include landscaping repair, sod replacement, or an automatic gate operator unless we quote those separately. Upfront pricing, no surprises: the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Glenn Heights Lots Specifically Do to This Job
Glenn Heights is a fast-growing bedroom city on the IH-35E corridor between Dallas and Waxahachie, and a lot of the work here is ground-up construction on acreage that was farm and ranch land a generation ago. That changes iron fencing more than people expect. Crews routinely hit old stock tank edges, buried fence wire from the previous property line, and ag debris during excavation on infill lots in 75123. On top of that, the expansive blackland clay under most of the city shrinks and swells hard between wet and dry seasons, which is exactly why footing depth and drainage grading aren’t optional on a fence that’s supposed to stay plumb for twenty years. We size footings and set them below the active clay zone for that reason. Permits and HOA approval depend on your specific plat and subdivision rules, and we’ll tell you plainly what your lot requires before we start.
Serving Glenn Heights, TX – Our Local Coverage Area
We serve Glenn Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Iron Fence in Glenn Heights
Most residential iron fence jobs take two to four working days from layout to sign-off. That includes a 24- to 48-hour concrete cure between footings and panel setting. Larger lots with multiple drive gates can run longer. Call (844) 797-4808 and we’ll give you a realistic timeline for your specific lot.
Permit requirements depend on your plat, the fence height, and whether it sits on a corner or in an easement. We check what your specific lot needs before work starts and tell you in writing. Rules vary by subdivision, so don’t assume a neighbor’s job sets the standard for yours.
In most cases, yes. We call in the 811 locate first, and we can route the line around established trees and beds. If a post lands directly on a buried utility, we adjust the layout. That’s a conversation we have on day one, not a surprise later.
Per-foot pricing typically lands in the range that produces a $3,500 – $9,000 total for most residential lots, with taller runs, decorative detail, and drive gates toward the top. Call (844) 797-4808 for an exact quote on your line footage; estimates are free.
Our workmanship is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. Material and finish warranties vary by product, and we spell out both on your written estimate. Nothing hidden in fine print.
Get a Free Iron Fence Estimate in Glenn Heights
Call (844) 797-4808 for a free on-site estimate on your iron fence in Glenn Heights. A real person answers, 24/7. We’ll walk your line, check your plat and setbacks, and hand you a written line-item quote with footing spec, footage, and gate count spelled out. No-hassle pricing, nothing to sign on the spot. For the wider perimeter scope, see our Fence Installation in Glenn Heights page, and homeowners often pair a fence run with Patios, Walkways & Pool Decks in Glenn Heights when they’re redoing the whole yard. You can also explore our Fence Installation service or check the Glenn Heights service area for everything we cover. Planning a separate structure? ADU Design & Permitting in Glenn Heights covers that side of the property.
Written by the team at Groundwork Construction Co.