Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Cedar Hill, TX: What It Takes and What It Costs
A new concrete driveway in Cedar Hill runs $4,500 to $12,000, and a full replacement lands between $5,000 and $14,000. Most driveways take two to four working days from demo to the last control joint, plus a cure window before you park on it. Call (844) 797-4808 and we’ll walk your slab, check the grade, and put a written line-item number in your hands. Concrete Driveways & Concrete Work is the whole job here: tear-out, base, forms, pour, finish, and the details that keep North Texas clay from cracking it open.
How a Concrete Driveway Gets Built Here, Step by Step
Concrete work looks simple from the street. The half you never see is the base, and in Cedar Hill’s clay that’s where driveways live or die. Here’s the sequence we run, start to finish.
Stage 1: Walk, measure, and mark utilities (day 1)
We measure the existing slab, check thickness and crack patterns, and look at how water drains off your lot. On sloped lots, that’s often the most important hour of the job. You decide the driveway width, apron style, and whether you want any expansion into a walkway or pad. We handle the utility locate request.
Stage 2: Demo and haul-off (days 1 – 2)
A typical two-car driveway comes out in a day with a skid-steer and breaker, and the debris goes straight into dumpsters. You’ll want cars off the driveway the night before. If there’s old base, root intrusion, or a buried sprinkler line, we flag it before the pour, not after.
Stage 3: Grade, base, and forms (days 2 – 3)
We excavate to depth, compact a graded crushed-stone base, and set forms to the final elevation. On Cedar Hill’s hillside lots this is where retaining or a step-down apron enters the picture. You approve the final slope, because the wrong pitch sends water into the garage or toward the neighbor’s fence.
Stage 4: Pour, finish, and control joints (day 3 or 4)
We pour 4-inch-thick concrete (5 to 6 inches where trucks or heavy loads roll), screed, float, and cut or hand-tool control joints on a layout that controls where cracks occur. Finish is your call: broom, exposed aggregate, or a saw-cut border. Most Cedar Hill homeowners pick a medium broom for grip on the slope.
Stage 5: Cure and the first drive-on (days 4 – 10)
Concrete keeps gaining strength for weeks, so we keep it wet-cured or sealed depending on the mix and weather, no traffic for about 7 days, and full cure around 28. We walk it once more before we call the job done. Every project carries our 730-Day Done Right Promise, so if a finish or joint issue shows up later, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Decisions You’ll Actually Make Before We Pour
Concrete is not one product. These are the choices that change both how the driveway performs and what it costs.
- Plain broom-finish concrete: the standard and the most budget-friendly. Light gray, textured, easy to match if you add onto it later. Suits most Cedar Hill front driveways.
- Exposed aggregate: the top layer of paste is washed away to reveal the stone, which gives a warmer, higher-end look and better wet-grip on a slope. Usually a meaningful step up in price, and harder to repair invisibly.
- Colored or integral-stain concrete: pigment mixed into the pour or applied after cure to match brick or stone on the house. Great for custom homes; expect a noticeable premium.
- Fiber mesh vs. rebar: fiber mesh is a lighter reinforcement that controls surface cracking; #3 or #4 rebar set on chairs is the heavier option and what we recommend under driveways over clay. Worth the upcharge.
- Standard gray vs. upgrade mix: a 4,000 PSI mix (rather than a basic 2,500 to 3,000 PSI) resists freeze-thaw and heavy loads better. Materials like Quikrete and Sakrete cover patch and small-section work; full pours come ready-mix.
- Width and layout: a 10-foot single stall or a 20-foot double changes both yard space and the number of joints and cubic yards you’re paying for.
What Concrete Driveways & Concrete Work Costs in Cedar Hill, TX
Most Cedar Hill concrete work falls inside these bands. The low end is a basic single-stall replacement on flat, well-draining ground; the high end is a wider drive, rebar, an upgraded mix, and grade work on a slope.
| Scope | Typical range |
|---|---|
| Concrete driveway installation | $4,500 – $12,000 |
| Full driveway replacement | $5,000 – $14,000 |
| Concrete driveway sealing | $250 – $700 |
| Paver driveway, if you’d rather compare | $7,000 – $18,000 |
Five things push a job toward the top of that range. Square footage is the biggest. Site access and slope matter next, since a tight or steep lot means more hand work and more base. Thickness and reinforcement are the third: rebar and a 5-inch slab cost more but survive clay and heat loads. Then there’s haul-off: if the old slab is thick or sits on rock, demo costs climb. Last, any retaining wall or drainage correction needed to protect the slab. Our written estimate itemizes demo, base, pour, and finish, and the number you see is the number you pay. What isn’t included is landscape repair after a big demo or moving a fence line, and we tell you that up front instead of adding it later.
See the difference
Before
After
Before
After
Before
AfterWhat Cedar Hill’s Terrain and Housing Do to This Job
Cedar Hill is a hilly, tree-covered city, and that shapes concrete work more than most people expect. On the west side near Joe Pool Lake, crews often hit limestone within a few feet of grade, so rock saws and harder excavation are part of the estimate. East-side lots with mature live oaks need tree-protection plans before we cut anything, and root intrusions are a common reason an older driveway is heaved and cracked. Older ranch homes in the original townsite sit on expansive North Texas clay that swells and shrinks with the seasons; that’s the same soil behind so many foundation repairs in Cedar Hill, and it’s exactly why we spec rebar and a heavier mix under driveways. On the hilly lots with custom homes off Belt Line and Wintergreen, the grade drops sharply from parcel to parcel, so slope management and the odd retaining wall are routine. We cover the whole city, from 75104 to 75106. If the driveway is one piece of a bigger plan, see our Driveway & Pavers in Cedar Hill page for the full scope, and homeowners often pair a new pad with a Garage Conversion ADU in Cedar Hill.
Serving Cedar Hill, TX – Our Local Coverage Area
We serve Cedar Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Concrete Driveways & Concrete Work in Cedar Hill
Plan on two to four working days for a standard driveway, then about 7 days before you park on it and roughly 28 days to full cure. Complex grade or replacing a large slab adds a day or two. Call (844) 797-4808 for a schedule that fits your lot.
Many residential driveway replacements don’t require a permit, but any change to the apron at the street or the lot’s drainage and grade may. We check the local requirement for your address before we start, so there are no surprises. Call (844) 797-4808 and we’ll confirm what your project needs.
Pouring over an existing slab is technically possible but we rarely recommend it for Cedar Hill, because the failing base underneath is the real problem and clay movement will crack the new layer too. Full removal and a fresh compacted base cost more up front and last far longer. Call (844) 797-4808 to hear what makes sense for your slab.
Installation runs $4,500 to $12,000 and a full replacement $5,000 to $14,000, with size, thickness, reinforcement, and slope driving the number. Sealing afterward is $250 to $700. Call (844) 797-4808 for a free, itemized quote.
Every job is backed by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If something isn’t right, we come back and fix it. Our driveway & pavers service gives you a single point of contact for the whole project. Call (844) 797-4808 to get started.
Get a Free Concrete Driveway Estimate in Cedar Hill
We’ll walk your lot, check the grade and soil, and put together a written, itemized estimate for Concrete Driveways & Concrete Work in Cedar Hill, with no surprises on the final bill. We also offer $1,000 off projects over $10,000 and 0% financing for 18 months. You’ll find the full range of what we do in Cedar Hill on our new detached ADU and driveway & pavers service pages, and our Cedar Hill page covers every job we take on. Call (844) 797-4808 to book your free estimate.
Written by the team at Groundwork Construction Co.