A Groundwork company - serving Dallas, TX
Asphalt Driveways & Resurfacing in Cedar Hill, TX | Groundwork Construction Co. of Dallas

Asphalt Driveways & Resurfacing in Cedar Hill - Free On-Site Measure, Price Per Square Foot

Free on-site measure and a written price per square foot before we book you in. Proper base preparation and sealed edges, because a cheap base is why driveways crack.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Asphalt Driveways & Resurfacing in Cedar Hill, TX: What It Costs and How Long It Takes

Asphalt paving in Cedar Hill typically runs $3,500 – $9,000 for a new drive, and a full resurface (mill and overlay) generally lands in the lower half of that range. A standard two-car drive is a 2 – 3 day job: one day of prep and grading, one day of paving, then a short curing window before you park on it. For acreage properties with long service drives out to a detached workshop, expect a longer schedule and a higher number. Call (844) 797-4808 for a free on-site estimate.

Call (844) 797-4808

From bare ground to a finished drive: how we build it

Asphalt is unforgiving. The blacktop you see is the easy part; almost everything that decides whether the drive lasts 8 years or 25 happens below it. Here’s the sequence we run, and what you’ll be deciding at each step.

Stage 1: Site walk and grade check (day 1, about an hour). We measure the run, check the existing base, and look at how water moves off the property. On Cedar Hill’s hillside lots, that conversation is mostly about slope and where the water goes after a storm. This is also where we flag rock, roots, or a grade change that will need retaining work. You decide the alignment: where the drive enters, where it widens, and whether it turns to reach a shop or garage.

Stage 2: Excavation and subgrade prep (day 1, 4 – 6 hours). We strip the old surface or topsoil, shape the subgrade, and compact it in lifts. On the west side of Cedar Hill near Joe Pool Lake, this is where limestone shows up within a few feet and a rock saw comes out – that adds time and cost, and it’s better to know on day one than day three. East-side lots with mature oaks may need a tree-protection plan before anything gets dug. You approve the base depth and the drainage plan here.

Stage 3: Base and edge restraint (day 2, 3 – 4 hours). Crushed stone base goes down and gets compacted, then edge restraints are set. A heavier base is the single best money you can spend if the drive will carry a truck or a trailer. You choose base thickness based on what will actually be driven on it, not on what looks good in a brochure.

Stage 4: Paving (day 2, 2 – 4 hours). Hot-mix asphalt is laid and rolled while it’s still workable. Compaction is checked as we go. You’ll see the finished surface by end of day, but it isn’t ready to drive on yet.

Stage 5: Cure and seal (3 – 7 days out, then a season later). The drive cures over the next few days. Sealing is typically scheduled 6 – 12 months after installation, once the asphalt has had a chance to set. You decide the seal timeline; we’ll tell you when it’s actually ready, not when it’s convenient to sell you the service.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Resurface or replace? The options you’ll weigh

For most Cedar Hill homeowners, the real choice is between a full new install, a mill-and-overlay resurface, or patching plus seal. Each has a place, and the wrong pick costs you twice.

  • Full new asphalt install: tear out, new base, new surface. Best when the base is failing or the drive is 20+ years old. Highest upfront cost, longest service life.
  • Mill and overlay (resurfacing): grind off the top layer and lay fresh asphalt over sound base. Cheaper and faster than a full rebuild, but only works if the base underneath is still solid. If the base is gone, you’re paving over a problem.
  • Patch and seal: the economical fix for isolated cracks and worn spots. Good for buying a few years, not for fixing structural failure.
  • Base thickness: a standard residential drive gets a lighter base than one that carries a heavy truck or a trailer to a workshop. Oversized or heavy doors and long service drives usually justify a heavier base.
  • Drainage and slope: on Cedar Hill’s hillside lots, how the drive sheds water matters as much as the asphalt itself. Sometimes a small retaining wall or swale is the right call, and it’s part of a full Driveway & Pavers in Cedar Hill conversation rather than a separate line item.
  • Material grade: standard mixes are fine for most drives; heavier-traffic mixes cost more and hold up longer where vehicles and equipment are frequent.

If you’re weighing asphalt against pavers or concrete, our Driveway & Pavers service covers the comparison in full. For this job, we’re talking asphalt only, and we’ll say plainly when asphalt isn’t your best option.

What Asphalt Driveways & Resurfacing costs in Cedar Hill, TX

Most asphalt driveway work in Cedar Hill falls between $3,500 and $9,000, and resurfacing tends to sit below that ceiling. Here’s what actually moves you toward the low or high end:

Line item Typical range
Asphalt driveway paving (new) $3,500 – $9,000
Driveway replacement (full tear-out and rebuild) $5,000 – $14,000
Driveway sealing (after cure) $250 – $700

The variables that push the number:

  • Length and width: a long service drive out to a detached shop or oversized garage is the biggest cost driver. Square footage drives everything.
  • Existing condition: sound base means a resurface; failed base means a full rebuild.
  • Rock and site access: west-side lots that hit limestone, or east-side lots that need tree protection, add excavation time.
  • Base depth and drainage: heavier base and any retaining or swale work add cost but extend life.
  • Permits and inspection scope: any work touching grade or drainage may pull in a permit.

A written estimate from us includes excavation, base, compaction, paving, edge restraint, and cleanup. It typically does not include rock removal beyond the estimate, landscape repair, or the later seal coat – we’ll say so upfront. Upfront pricing, no surprises: the number you see is the number you pay.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Cedar Hill homes specifically do to this job

Cedar Hill is a hilly, tree-covered city, and that shapes this job more than anything else. Lot to lot, the grade drops sharply, so driveway work here is really slope-and-water work with asphalt on top. On the west side near Joe Pool Lake, builders hit limestone within a few feet and bring in rock saws; on east-side lots with mature oaks, a tree-protection plan comes before any excavation. Much of the new construction is custom-home and lot-clearing work, while the older single-family neighborhoods off Belt Line and Wintergreen – mostly 1980s – 2000s homes, plus ranch homes in the original townsite – often need careful slope management and retaining walls because the terrain falls away from the house. The expansive North Texas clay shifts seasonally, so drives crack and heave, and we schedule exterior work in spring or fall when we can; summer work needs heat plans and dust control. We know this terrain well and cover Cedar Hill and the surrounding area, with neighbors in DeSoto, Glenn Heights, Grand Prairie, and Duncanville calling on us too.

Serving Cedar Hill, TX – Our Local Coverage Area

We serve Cedar Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently asked: Asphalt Driveways & Resurfacing in Cedar Hill

Get a free on-site estimate for your Cedar Hill asphalt project

Call (844) 797-4808 to schedule a free on-site estimate for your asphalt drive. We’ll walk the lot, check the base and slope, and hand you a written, line-item quote with the finish and drainage plan spelled out. Calls are answered by a live person 24/7, and every project is backed in writing by our 730-Day Done Right Promise, with 0% financing for 18 months and $1,000 off projects over $10,000 available.

Written by the team at Groundwork Construction Co.

Why Cedar Hill Chooses Groundwork Construction Co. of Dallas

We set the standard for asphalt driveways & resurfacing in Cedar Hill.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Cedar Hill

Getting your asphalt driveways & resurfacing project started is simple.

1

Call or Request a Free Estimate

Tell us about your asphalt driveways & resurfacing project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local asphalt driveways & resurfacing pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Cedar Hill Customers Say

Trusted by homeowners across Cedar Hill and surrounding areas.

★★★★★

"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."

Craig Whitaker
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett

Ready for Asphalt Driveways & Resurfacing in Cedar Hill?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Cedar Hill.

(844) 797-4808

Request a Free Estimate in Cedar Hill

Tell us about your asphalt driveways & resurfacing needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - 24/7 Dispatch