Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Euless: What the Job Really Involves
Replacing a bathroom vanity, re-tiling a floor or shower surround, and swapping out fixtures in Euless typically runs $9,000 – $28,000 when it’s part of a full bathroom renovation, or $800 – $3,000 for a vanity replacement done on its own. Most vanity, tile, and fixture jobs take three to seven working days once materials are on site. Call (844) 797-4808 and we’ll walk your Euless bathroom and give you a written, line-item number before anything gets demoed.
How We Sequence a Vanity, Tile & Fixture Job
Every Euless bathroom we touch follows the same order, and the order matters more than most homeowners expect. Here’s how the days actually break down.
Day 1: Demo and shutoff
We shut off water at the angle stops, pull the old vanity, and strip tile down to the substrate. On 1960s – 1990s Euless homes, that often means finding a mud-set bed under the old floor tile or drywall behind the shower walls that’s been softened by years of small leaks. We open the wall where we need to and stop if we find something structural. You’ll decide that day whether we repair what’s behind the wall or pause for a revised number.
Day 2: Rough-in and inspection
If the vanity is moving or the shower valve is being replaced, the plumber relocates supply and drain lines and we rough in the new valve body. Any electrical for a vanity light or GFCI gets run here. If we’re relocating plumbing or adding a circuit, that work gets inspected before it’s covered. You’ll confirm fixture placement and outlet locations on this day, because after the wall closes, moving them costs real money.
Day 3: Substrate and waterproofing
We install cement backer board or a bonded waterproofing membrane in the wet areas and set the floor substrate. This is the stage that separates a tile job that lasts from one that fails in five years, and it’s invisible when we’re done. You won’t see it, but we photograph it for your file.
Days 4 – 5: Tile setting
Floor tile, shower walls, and any wainscot go down or up. Large-format tile takes longer to set than a mosaic, and a herringbone or offset pattern adds a day. You’ll pick your grout color and joint width before this stage, not during it.
Days 6 – 7: Vanity set, fixtures, and final
We set the vanity, connect the drain and supply, install the faucet, mirror, light, shower trim, and toilet, then grout, caulk, and clean. You walk it with us before we call it done. Fixture brand and finish need to be locked in by day 2 so nothing arrives late.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
Most of the decisions on this job are made in the two weeks before demo, and the choices below are the ones that change both the look and the number.
- Vanity construction: a stock plywood-box vanity runs cheapest and works fine in a hall bath; a semi-custom or custom cabinet (KraftMaid is a solid pick here) buys you a fitted top, dovetail drawers, and a size that actually fills the wall. Custom adds weeks, not days, to the lead time.
- Vanity top: cultured marble is the budget choice and shows wear; quartz (Cambria and similar) handles moisture and cleaning far better; natural stone needs sealing every year or two.
- Floor tile: porcelain is the workhorse for an Euless bathroom, dense and forgiving of the slab movement we see here; ceramic is softer and cheaper; natural stone looks great but cracks more readily over a moving foundation.
- Shower wall tile: large-format porcelain (12×24 and up) means fewer grout lines to maintain; a small hex or subway mosaic gives a classic look but more grout to keep clean.
- Fixtures: Kohler and Moen-level trim holds up to North Texas hard water better than builder-grade; finish choice (chrome, brushed nickel, matte black) affects price more than function.
- Ventilation: an undersized exhaust fan is the single most common reason tile and paint fail in a humid bathroom. We check the CFM against the room size before we finish.
What Vanities, Tile & Fixtures Costs in Euless, TX
The lead range for this work in Euless is $9,000 – $28,000 when it’s rolled into a fuller bathroom renovation, and the piecemeal ranges below show where the money actually goes.
| Line item | Typical range in Euless |
|---|---|
| Bathroom vanity installation | $800 – $3,000 |
| Tile floor and shower walls | $2,500 – $7,000 |
| Faucet, shower valve, and trim | $600 – $2,000 |
| Vanity top (quartz or stone) | $700 – $2,500 |
| Mirror, lighting, and exhaust fan | $400 – $1,500 |
| Plumbing/electrical relocation, if needed | $800 – $3,500 |
Five things push a job from the low end to the high end: how much plumbing and electrical you’re relocating, the size of the bathroom, the condition behind the walls once demo starts, the tile grade and pattern, and whether a permit or inspection is triggered. A written estimate from us covers labor, substrate and waterproofing, setting materials, grout and caulk, and haul-away. It does not typically include the tile, vanity, or fixtures themselves unless you want us to source them, and it does not cover foundation work if we find a cracked slab under the tile. That’s quoted separately and only after you’ve seen it.
See the difference
Before
After
Before
After
Before
AfterWhat Euless Homes Specifically Do to This Job
Euless sits on blackland clay that swells after a wet spring and shrinks in a dry summer, and that movement shows up in bathrooms here in a way it doesn’t in Fort Worth or Dallas proper. We regularly see hairline cracks in floor tile and grout joints opening along the slab in older Euless homes, and if the crack runs through the tile field rather than stopping at a control joint, the cause is below the tile, not in it. The housing stock matters too: much of the 1960s – 1990s brick-veneer ranch and two-story housing across the 76039 and 76040 ZIP codes still has original cast-iron drains and aluminum wiring, so a vanity replacement can turn into a drain stub repair or a new GFCI circuit once we’re in the wall. The 1980s – 2000s townhome and apartment stock along the airport corridor leans toward tighter bathrooms where the vanity and shower share a wall, and a frameless glass enclosure can be paired with the tile work. Local plumbing and building permits are pulled before demo and inspected before walls close, which adds a day or two to the schedule. Our technicians have up to 12 years of experience with this kind of work. Homeowners often pair a bathroom tile refresh with Tile Roofing in Euless when hail has hit the roof at the same time, and occasionally with Specialty Roofing in Euless for storm-damaged flashing over the bath windows. This work is often part of a Bathroom Remodeling in Euless project, and our Bathroom Remodeling service covers the wider scope. We work throughout Euless and the surrounding DFW area.
Serving Euless, TX – Our Local Coverage Area
We serve Euless and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Euless
Most jobs take three to seven working days once materials are on site. A vanity-only swap is one to two days; a full bathroom tile and fixture job with plumbing relocation lands closer to seven. Call (844) 797-4808 for a scheduling estimate on your specific bathroom.
If you’re moving plumbing, relocating electrical, or relocating a shower valve, yes, that rough-in gets inspected. A simple tile and vanity swap without moving anything usually doesn’t trigger one. We pull the permits and handle the inspection, and the estimate states whether permit cost is included. Call (844) 797-4808 and we’ll confirm your scope.
Often, yes. If the new vanity is the same width or wider and the existing drain and supply are sound, we can set it in the same spot with only minor adjustment. That’s usually the difference between the $800-$1,500 end and the $3,000 end of a vanity install. Call (844) 797-4808 for a walkthrough.
Plan on $9,000 – $28,000 for the fuller bathroom scope, or $800 – $3,000 for a vanity replacement alone. The biggest cost driver is how much plumbing and electrical gets moved. Call (844) 797-4808 – estimates are free and come with a written line-item breakdown.
Every job is backed by our 730-Day Done Right Promise: if it isn’t done right, we make it right. All technicians are background-checked and arrive in uniform, and calls are answered by a live person 24/7. Call (844) 797-4808 to book a free estimate.
Get a Free Estimate for Vanities, Tile & Fixtures in Euless
We’ll come to your Euless bathroom, measure the space, look at what’s behind the wall where we can, and hand you a written line-item number with the tile, vanity, and fixture selections spelled out. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off. Call (844) 797-4808 to schedule your free estimate.
Written by the team at Groundwork Construction Co.