Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinet Refacing vs Replacement in Dallas, TX: Which One Actually Makes Sense?
Choose refacing unless the cabinet boxes themselves fail a structural check – because in Dallas, roughly 40% of kitchens we assess can be refaced and 60% can’t. Cabinet refacing is the right call when the existing frames are solid, the layout works, and you’re planning to sell within about five years. Replacement wins when base cabinet boxes have gone soft from decades of moisture migration under a slab-on-grade foundation. The cost gap is real – refacing runs $4,000-$9,000 versus $12,000-$25,000 for KraftMaid semi-custom replacement – but the box integrity check decides it more reliably than any price-per-linear-foot math. Call (844) 797-4808 and we’ll walk you through where your Dallas kitchen lands.
Key Takeaways
- Refacing is a face-only job: new doors, drawer fronts, and veneer over the existing boxes. It only works if the boxes are sound.
- Dallas sits on Blackland Prairie expansive clay, where slabs flex through wet-dry cycles and cabinet interiors quietly absorb the moisture that comes with it.
- We test box integrity before quoting either option – if three or more base cabinets fail, replacement is almost always the better investment.
- We price refacing and replacement both upfront, in writing, before demo starts. No mid-job surprises.
Why Dallas Cabinets Fail Differently Than Cabinets Everywhere Else
Dallas sits in the heart of the Blackland Prairie, where vertisols swell and shrink dramatically with every wet-dry cycle. That soil movement pushes on post-tension slabs, and when a slab moves, so does everything bolted to it. Cabinets included. Add the region’s hot, humid summers – attic heat, kitchen humidity, a dishwasher venting into the cabinet next door – and the base boxes become the structural weak point nobody talks about in a standard comparison guide.
The housing stock makes it worse in specific pockets. Dallas mixes pre-war pier-and-beam bungalows in Oak Cliff and East Dallas with tens of thousands of 1950s-70s slab-on-grade ranch homes. Those mid-century ranches – especially in Garland, Irving, and North Oak Cliff – were frequently built with particleboard-core base cabinets, exposed to 50-plus years of humidity rising through an unsealed slab. Particleboard doesn’t fail gracefully. It delaminates, softens, and crumbles. Putting new veneer on that core is cosmetic surgery on a compromised structure, and it will not hold.
That’s the check most refacing quotes skip entirely. Local crews doing Kitchen Remodeling in Dallas know the drill: a slab poured without proper drilled-pier depth shows telltale signs – stair-step brick cracks, sticking doors, cabinet drawers that bind after a dry summer. When that slab is under your kitchen, the cabinets sitting on it tell the same story, and it’s worth reading before you sign.
The Box Integrity Test We Run on Every Dallas Kitchen
Before any proposal, we put hands on the existing cabinets. It’s not a sales tactic – it’s the single step that prevents you from paying for refacing on boxes that are going to fall apart under the new doors. Here’s what we check:
- Base cabinet floors: Run a hand across the bottom interior of every base cabinet. Soft spots, dark staining, and delamination around the edges means the core has taken on water and failed.
- Interior corners and seams: Inspect where side panels meet back panels and top rails. Any visible separation or gapping means the box is moving with the slab and has already begun to rack.
- Drawer racking: Open and close every drawer. A drawer that binds, scrapes, or won’t sit flush is a symptom – not a hardware problem, a square problem. The box has gone out of true.
- Fastener integrity: Check that the boxes are still solidly anchored to the wall and floor. A box that rocks under hand pressure won’t hold a new veneer.
The rule we use: if three or more base cabinets fail any of these checks, replacement is the better investment – every time. Refacing three sound boxes and four failed ones means the failed ones get re-faced anyway, and you’re back in the same kitchen in five to seven years when the softened core gives out under new weight. Because we run this assessment as part of the proposal – not as a discovery mid-job – you’re never locked into a refacing contract that suddenly needs to become a full replacement after demo has begun.
Refacing vs. Replacement Cost in Dallas: Real Numbers, Side by Side
Here’s what the two paths actually run in the Dallas market, priced on a typical 20-cabinet kitchen. These are ranges, not teaser numbers – final pricing depends on door material, box count, and whether the layout stays put.
| What You’re Getting | Refacing | Full Replacement |
|---|---|---|
| Doors & drawer fronts | New (vinyl, wood veneer, or laminate) | New |
| Cabinet boxes | Existing – must pass integrity test | New (KraftMaid semi-custom) |
| Layout flexibility | None – openings stay where they are | Full – relocate sink, range, island |
| Interior hardware (soft-close, pull-outs) | Limited retrofit | Full new system |
| Warranty on the full box | Not offered (faces only) | Full-box coverage |
| Typical 20-cabinet Dallas cost | $4,000-$9,000 | $12,000-$25,000 installed |
A full Dallas kitchen remodel – cabinets, countertops, the whole scope – typically runs $14,000-$45,000 depending on square footage and finish level. Cabinet installation alone runs $4,000-$13,000. Refacing sits at the low end of the cabinet line item because you’re not paying for new boxes; replacement sits at the high end because you’re paying for the box, the interior hardware, the layout flexibility, and a full-box warranty that refacing simply can’t offer.
That warranty gap matters more than the spreadsheet suggests. Refacing warranties cover the faces. They don’t cover what’s behind them. When the underlying boxes are Dallas mid-century particleboard, the faces will outlast the frame underneath them. Replacement gives you a KraftMaid box with full coverage behind it – and on top of that, every Groundwork project is covered by the 730-Day Done Right Promise. If it isn’t done right, we make it right, for two full years.
When Refacing Is the Right Call – and When It Isn’t
We’d rather give you a straight answer than an upsell. Here’s our defensible line.
Refacing makes sense when: The boxes pass the integrity test clean, the layout already works for how you cook and live, you’re planning to sell within about five years, and a fresh door profile and drawer front is what the kitchen actually needs. That’s most of the kitchens in newer Dallas infill construction and plenty of well-maintained homes in East Dallas and the surrounding neighborhoods. A $4,000-$9,000 refacing on a sound box is a smart spend and it will hold up.
Replacement makes sense when: Three or more base boxes fail the check, the layout is inefficient (blocked corners, no landing zone next to the range, a peninsula that fights traffic flow), or you’re planning to stay in the home ten years or more. A refacing job on soft boxes is money you’ll spend twice. And if you’ve been putting off the layout fix for a decade, refacing locks it in for another decade.
The honest middle ground: if the boxes are borderline – one or two failures but the rest solid – we’ll tell you where the risk sits, what it’ll cost to replace just the failing runs, and let you decide. No pressure either way. That’s what upfront pricing actually means.
While you’re weighing cabinet options, this is also the moment to think about countertops, backsplash, and island work as part of one coordinated scope – because doing those on a refaced kitchen is straightforward, and doing them after a replacement is a different sequencing conversation. Our team will map both paths for you in a single proposal.
Why Homeowners in Dallas Call Us Before Signing a Refacing Contract
Groundwork Construction Co. of Dallas has been serving local communities since 2014, and our technicians bring up to 12 years of experience into every kitchen assessment. Because we price both refacing and full replacement upfront, in writing, before demo begins, you see the real numbers on both paths before you commit to either. The assessment isn’t a post-discovery surprise – it’s baked into the proposal.
Every project is backed by the 730-Day Done Right Promise. Technicians are background-checked and arrive in uniform. Calls are answered by a live person 24 hours a day, seven days a week – no voicemail, no waiting until Monday. If you’re looking at the full kitchen, from cabinets to countertops to layout, you can see our full scope on our home page.
Frequently Asked Questions About Cabinet Refacing vs Replacement in Dallas
Refacing a 20-cabinet Dallas kitchen runs $4,000-$9,000 depending on door material; full KraftMaid semi-custom replacement runs $12,000-$25,000 installed. The replacement price includes the boxes themselves, new interior hardware, full layout flexibility, and a full-box warranty that refacing can’t offer. Call (844) 797-4808 for an exact quote – estimates are free.
Refacing is cheaper upfront, usually by $3,000-$16,000 on a standard 20-cabinet kitchen. But “cheaper” depends on whether your base boxes are sound. In Dallas’s 1950s-70s slab-on-grade ranch homes – common in Garland, Irving, and North Oak Cliff – particleboard-core boxes have often taken on enough moisture to fail. Re-facing a failed box means paying twice. Call (844) 797-4808 and we’ll tell you which path your kitchen actually needs.
Check the floors of your base cabinets for soft spots and delamination, inspect interior corners for separation, and open every drawer to look for racking. If three or more base cabinets fail any of those checks, replacement is almost always the better investment. We run this exact test on every Dallas assessment before quoting refacing or replacement. Call (844) 797-4808 to schedule yours.
For Dallas’s humid summers and slab movement, plywood-core semi-custom boxes – like KraftMaid’s line – hold up better than particleboard-core boxes on ranches built in the 1950s-70s. The bigger variable isn’t the door material; it’s the box behind the door and whether your slab is moving enough to affect it. Our team will point out the specific risk factors in your home.
If you’d rather have it looked at, Groundwork Construction Co. of Dallas offers a no-pressure assessment in Dallas – call (844) 797-4808. We’ll run the box integrity check, price refacing and replacement both, and give you the straight answer on which one your kitchen actually needs. Free estimate, upfront pricing, no surprises.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas, TX.