Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Bathroom Remodeling: The Dallas Owner’s Guide
ActiveYards-compatible bathroom remodeling installed by Groundwork Construction Co. of Dallas runs $9,000 to $28,000 for a full bath, and we schedule the work as a planned project rather than a one-visit swap. Most Dallas owners discover a problem the same way: a soft spot in the subfloor near the shower, a vanity that’s pulling away from the wall, or grout that keeps cracking no matter how many times it’s patched. By the time you’re reading this, the failure is usually visible and the questions are about scope, part matching, and what it costs to make it right.

We’re an independent service provider. We’re not affiliated with ActiveYards, and we don’t claim to carry their parts or stock them anywhere. What we do is match your existing fixtures and finish specs to the right replacement components, pull the Dallas permits, and install the work under our 730-Day Done Right Promise.
Key Takeaways
- Full ActiveYards-compatible bath remodel in Dallas: $9,000 – $28,000 installed.
- Smaller scopes run $5,000 – $12,000; a walk-in shower alone is $4,500 – $12,000.
- We identify your ActiveYards series before quoting. No guessing on finish or sizing.
- Live person answers the phone 24/7 at (844) 797-4808.
- Upfront pricing: the number we quote is the number you pay.
Which ActiveYards Models This Applies To
ActiveYards bathroom systems show up in Dallas homes most often as pre-built shower surrounds, vanity tops, and tub-to-shower conversion kits. The series matter because panel dimensions and finish codes aren’t universal: a surround that measures 60 inches across the back wall in one series won’t seat flush in another, even when both are sold as “standard.” That half-inch gap is where leaks start, and it’s the single most common compatibility gotcha we see.
To identify what you have, check three places. First, look for a label or stamped code on the back of the surround panel or underneath the vanity top – ActiveYards codes typically include a series prefix and a size suffix. Second, measure the rough opening yourself: width, height, and the depth from the back wall to the finished face. Third, photograph the drain and valve placement, because retiling around an existing valve body constrains your options more than the panel itself does.
On the OEM-versus-aftermarket question: OEM replacement panels guarantee an exact fit but often carry a lead time. A quality aftermarket equivalent from a comparable manufacturer can match the finish and dimension closely, cost less, and arrive faster. Our technicians have up to 12 years of experience reading these specs, and we’ll tell you honestly which route makes sense for your ActiveYards setup and your timeline in Dallas. We don’t claim either option as stock on hand.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Bathroom Remodeling Is Failing
- Soft or spongy floor near the shower or tub. Water has been getting past the surround seal for months before it shows. The subfloor is the casualty, not the panel.
- Caulk lines that keep reopening. Recaulking and watching it split again means movement behind the wall – usually a loose substrate or a panel that never seated correctly.
- Vanity pulling away from the wall or wobbling. Anchoring has failed, or the wall behind it wasn’t sound when it was installed. Both are common in older Dallas homes with plaster over lath.
- Grout cracking in a repeating pattern. Hairline cracks along the same joints every time point to deflection in the floor or backer board, not bad grout.
- Discoloration or a musty smell at the base of the surround. Trapped moisture behind the panel. This is the one that most often turns a panel swap into a full remodel.
Replacement Cost & What’s Included
Here’s what ActiveYards-compatible bathroom work costs in Dallas, installed, with labor and materials broken out in the written quote:
| Scope | Installed Range |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Vanity installation | $800 – $3,000 |
What drives the range: whether the subfloor is sound, whether the valve needs to move, tile versus panel finish, and how much of the existing plumbing wall has to come open. We pull the permits, and the inspection passes before we call the job done. Every project carries the 730-Day Done Right Promise – if it isn’t right, we come back and make it right. Kitchens in the same home often use KraftMaid cabinetry, Cambria or Silestone counters, and we handle those brand-matched details too.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: measure the rough opening, find the ActiveYards label and code, and photograph the drain and valve placement. That’s information, not work, and it saves us both time on the estimate. Where DIY goes wrong is the tear-out and re-seal. A surround removed without the right backing prep lets moisture back in behind the new panel within a season, and a valve that gets disturbed during a panel swap can leak inside the wall where you won’t see it. There’s also the matter of Dallas permits – unpermitted bathroom work can complicate a future sale.
If you’re weighing a repair against a replacement, or you just want a real number to plan around, call (844) 797-4808. A live person answers any time, day or night, and the estimate is free.
FAQs
A properly installed surround or vanity assembly typically runs 15 to 25 years in Dallas conditions, but our summers and humidity shorten that if the caulk and ventilation aren’t maintained. Recaulk the wet joints annually and run the exhaust fan for 20 minutes after every shower – those two habits make the biggest difference. Call (844) 797-4808 for an exact quote on your setup; estimates are free.
Sometimes, yes. A single cracked panel or a loose vanity anchor can often be repaired without a full remodel, and we’ll tell you when that’s the honest answer. What usually can’t be repaired is water damage behind the panel, and that’s the case where a patch just delays a bigger bill. Call (844) 797-4808 and we’ll look before we quote.
A shower or vanity swap typically finishes in a few days; a full bath remodel runs several weeks once the permit is pulled. The timeline depends on whether the plumbing wall comes open and how the inspection schedule falls. Call (844) 797-4808 for a written timeline with your estimate; estimates are free.
We read your series code and measurements, then source OEM where fit matters most and quality aftermarket equivalents where the spec matches and the lead time is shorter. We don’t claim to stock ActiveYards parts, and you’ll see the part and labor priced line by line before any work starts. Call (844) 797-4808 to get your part matched and your quote started.
Get Your Dallas Bathroom Priced
If your ActiveYards bathroom is failing or you’re ready to replace it, we’re ready to quote it. Groundwork Construction Co. of Dallas offers no-hassle upfront pricing, $1,000 off projects over $10,000, and 0% financing for 18 months. We answer the phone live around the clock and stand behind every job with the 730-Day Done Right Promise. Call (844) 797-4808 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.