Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Home Additions & ADU: The Dallas Owner’s Guide
We build home additions and ADUs in Dallas using ActiveYards-compatible framing, roofing, and enclosure components, and a typical Dallas home addition runs $45,000 – $130,000 installed, while a full ADU lands between $90,000 – $220,000. These are planned builds, not emergency swaps, so we schedule them properly rather than promising a crew tomorrow. Owners usually discover a failing component the same way: a settlement crack that reappears over a doorway, a roofline that sags where the addition ties into the original house, or moisture showing up on an interior wall after a hard Dallas rain. That’s the moment the research starts, and it’s the moment we’d rather you call us than guess.

Key Takeaways
- ActiveYards-compatible additions and ADUs in Dallas: $45,000 – $130,000 for an addition, $90,000 – $220,000 for a detached or attached ADU.
- Most failures we see trace to settlement at the tie-in point, not the components themselves.
- Every project is backed by the 730-Day Done Right Promise – if it’s not done right, we make it right.
- We’re an independent builder, not affiliated with ActiveYards, and we source parts to match your assembly.
Which ActiveYards Models This Applies To
ActiveYards structures show up in Dallas in two categories: modular addition shells and ADU kits. The addition line uses numbered series designations, and the ADU kits run on a separate model code, usually printed on a plate inside the framed wall cavity, on the door jamb label, or on the documentation packet that came with the original installation. Find that code before you shop for anything.
The compatibility gotcha that trips up almost every owner: ActiveYards changed its connector and tie-in hardware between series over the years, and a bracket that fits one generation won’t seat correctly on the next. If you order by look rather than by code, you’ll get a part that bolts on and then moves. We verify the plate code and measure the actual opening, wall thickness, and tie-in spacing before we order a single component. When an OEM component is no longer produced, we specify a quality aftermarket equivalent rated for the same load and note on the quote exactly what we’re substituting and why. On Dallas additions, that documented substitution is the difference between a built assembly and a repair that fails again in two summers.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Home Additions & ADU Is Failing
- Recurring cracks above door and window openings. This usually points to differential settlement where the addition meets the original slab – the two structures are moving at different rates, and the drywall is telling you.
- Roof-to-wall separation or visible daylight at the tie-in. Flashing and connector hardware between the ActiveYards roofline and the existing house take the brunt of Dallas heat cycling, and a failed tie-in lets water travel sideways into the wall cavity.
- Water staining on interior walls after heavy rain. Often the roof transition or an exterior wall joint, not the roof field itself – which is why patching the shingles alone doesn’t stop it.
- Soft or spongy flooring near the perimeter. Moisture wicking under the ADU or addition slab edge, common where drainage slopes toward the structure.
- Doors that stick in summer and free in winter. Frame movement from thermal expansion on an exposed connector assembly, sometimes a sign the original hardware is undersized for the span.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed ranges for Dallas, calibrated to what we actually quote:
| Scope | Installed Range |
|---|---|
| Home Addition (ActiveYards-compatible) | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
What drives the number: square footage, whether you’re tying into an existing slab or pouring new, roof pitch and material, whether the ADU needs its own utility runs, and the accessibility of the build site. We quote line items – framing, tie-in hardware, roofing, enclosure, finishes – so you see the parts and the labor separately. Our technicians have up to 12 years of experience on these assemblies. Upfront pricing, no surprises: the number you see is the number you pay, and the whole build sits under the 730-Day Done Right Promise. We also take $1,000 off projects over $10,000 and offer 0% financing for 18 months.
DIY or Call Us?
What you can safely do yourself: photograph the failing area, locate and record the model code, check your original documentation, and note where water is entering. That’s genuinely useful and saves us time.

What we’d steer you away from: re-flashing a roof-to-wall tie-in, resetting a sagging connector assembly, or attempting structural repairs on an addition. These aren’t just hard – a botched tie-in can let water into the framing for months before you see it, and structural failure on a loaded span puts people at risk. Where a repair involves load-bearing hardware or cutting into the roof transition, it needs a trained professional. Call (844) 797-4808 for a free estimate and we’ll tell you honestly whether you’re looking at a repair or a rebuild.
FAQs
How long does an ActiveYards addition or ADU last in Dallas? A properly built assembly handles 30-plus years here, but the tie-in hardware and flashing are the weak point in Texas heat cycling and should be inspected every few years. Getting the transition right at install is what determines the lifespan.
Can a failing component be repaired instead of rebuilt? Often yes – a failed tie-in or isolated connector can be reset and re-flashed without tearing out the whole addition. We diagnose first, then tell you whether repair or replacement is the honest call. Call (844) 797-4808 for a free estimate.
How long does the swap take? A targeted component repair typically takes a few days; a full addition runs weeks and an ADU longer, scheduled around permits. We give you a real timeline in writing, not a guess. Estimates are free.
How do you source the right part? We read the model code off your assembly, measure the opening and hardware spacing, and match OEM where available or specify a rated aftermarket equivalent – documented on the quote. Call (844) 797-4808 and we’ll sort the compatibility before you spend a dollar.
Whether you’re planning a Dallas ADU, patching an ActiveYards tie-in, or comparing kitchen finishes – we also work with KraftMaid, Cambria, and Silestone – Groundwork Construction Co. of Dallas handles it from foundation to finish line.
Call (844) 797-4808 for a free estimate. A live person answers 24/7, and our technicians are background-checked and arrive in uniform. Built to last, backed in writing.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.