Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
American Standard Home Additions & ADU: The Dallas Owner’s Guide
American Standard-branded home additions and ADU packages in Dallas typically run $45,000 – $130,000 installed for a home addition and $90,000 – $220,000 for a full ADU, and the work is planned, permitted, and scheduled, not same-day. If you’ve landed here because something in an American Standard package has failed, you already know the feeling: a cracked sill flashing on the addition’s window wall, a door that won’t latch square, a moisture stain on the new framing. Owners usually spot it weeks after the dust settles, during the first hard Dallas rain, not during the walkthrough.

Key Takeaways
- We are an independent Dallas builder, not affiliated with American Standard. We install, repair, and match American Standard-compatible components.
- Addition pricing in Dallas: $45,000 – $130,000. ADU: $90,000 – $220,000.
- Every project is covered by our 730-Day Done Right Promise.
- Permits are pulled and inspections passed before we hand back the keys.
Which American Standard Models This Applies To
American Standard’s building-products line covers windows, patio and entry doors, and the trim and flashing that go with them, and those components show up inside addition and ADU shells all over Dallas. What matters to you is the model number and series, and it’s stamped in a few predictable places: a label on the window frame or sash edge, a metal plate on the door slab’s hinge edge, or a sticker inside the jamb. Photograph it before you call anyone.
Here’s the compatibility gotcha that trips up Dallas owners: American Standard window series don’t share glazing stops or screen frames across lines, and a replacement sash from one series will not seat in another even when the rough opening measures the same. Measure the visible glass and the frame depth, not just the opening. On the OEM-versus-aftermarket question, a genuine American Standard replacement part protects the original rating and the fit. A quality aftermarket equivalent can save money on trim and hardware, but it has to match the series, and cheap generic flashing is exactly what fails first in our Texas heat-and-hail cycle. We also service KraftMaid, Cambria, and Silestone components when an addition includes a kitchen or bath.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your American Standard Home Additions & ADU Is Failing
An addition is a system, and the failure usually shows up at the seams between that system and your original house. Here’s what Dallas owners report, and what sits underneath it.
- Water staining at the tie-in wall. The flashing where the new roof meets the old one wasn’t lapped correctly, so water tracks behind the siding instead of shedding off it.
- Doors that stick or won’t latch square. The framing has shifted, often because the foundation under the addition moved more than the original slab did.
- Condensation or fog between window panes. The seal on an American Standard insulated glass unit has failed, which is common after a decade of Dallas summers.
- Cracks at interior drywall corners. Normal settling shows as hairline cracks, but a widening crack at a corner means movement that needs a look, not a tube of caulk.
- Musty smell after rain. Moisture is trapped in a wall cavity, usually from a flashing or sealant gap that was never closed properly.
Each of these is fixable, and fixing it early is far cheaper than letting the damage reach the framing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Most repairs to an American Standard component inside an addition fall in the low thousands, while the addition itself runs $45,000 – $130,000 in Dallas. Here’s how the ranges break down, installed, with parts and labor shown honestly.
| Scope | Installed range (Dallas) |
|---|---|
| Home addition (full) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
| Window or door unit replacement | Falls within the addition range above, quoted per unit |
What drives the number: square footage, foundation type, whether the addition needs its own electrical panel, and how much of the exterior has to be re-flashed and matched. We give upfront pricing, the number you see is the number you pay, and 0% financing for 18 months is available. Every job carries the 730-Day Done Right Promise.
DIY or Call Us?
You can safely photograph the model label, note the series, and check for water stains or soft drywall with a fingertip. That’s it. What you should not do yourself is the structural work: re-flashing a tie-in wall, reframing a shifted header, or resealing a foundation. Opening a wall to chase a leak can expose you to wet framing, mold, and, in an older Dallas addition, live wiring. The honest answer is that these components are engineered as a system, and a bad DIY fix that looks finished will fail again at the next storm. Our technicians have up to 12 years of experience, and they’ll tell you plainly what’s failing and what it costs to fix it right. Call (844) 797-4808 for a free estimate.
FAQs
Expect 15 to 25 years from quality American Standard windows and doors, though Dallas hail and sun shorten that on any unit facing west or south. The addition’s shell, flashing, and foundation outlast the windows and doors that go into it.
Often yes. A failed seal unit can be re-glazed, and a leaking tie-in can be re-flashed without touching the structure. We assess whether a repair will actually hold before recommending replacement.
A single window or door unit usually takes a few hours; a full re-flash of a tie-in wall takes one to two days, weather permitting. Full addition or ADU work is scheduled by phase, not same-day.
We identify your series from the model label and order the matching part through authorized supply channels. We don’t claim to carry parts on a truck or hold local stock, and we won’t promise a specific lead time until we confirm it with the supplier.
Call (844) 797-4808 to schedule your free estimate. Live person, 24/7, and a written line-item quote before any work starts.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.