A Groundwork company - serving Dallas, TX

Ameristar Fence Installation in Dallas, TX

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Ameristar Fence Installation: The Dallas Owner’s Guide

Ameristar fence installation in Dallas typically runs $3,500 – $9,000 for a standard residential yard, depending on fence height, linear footage, gate count, and whether we’re setting new posts or working from existing ones. We install Ameristar ornamental steel and aluminum fencing across Dallas and the surrounding neighborhoods, and we source parts and panels to match your existing Ameristar system. Most jobs are quoted in a single visit and scheduled without the runaround.

Two contractors framing a doorway during a residential bathroom renovation in Dallas, TX

Call (844) 797-4808

Owners usually find out something’s wrong when a gate starts dragging, a post footing gives way, or a panel goes wobbly after a spring storm rolls through. Dallas sits in one of the harshest fence climates in the country, and Ameristar’s steel core doesn’t fail the way wood does, but the anchoring and the finish take a beating.

Which Ameristar Models This Applies To

Ameristar makes ornamental steel and aluminum fence in several series, and the parts don’t interchange freely across them. The most common residential lines in Dallas yards are the steel ornamental panels (often 4-, 5-, or 6-foot tall) and the aluminum lines used around pools and front entries. The critical gotcha: post spacing differs by series. Ameristar’s steel systems and aluminum systems don’t share the same post centers or bracket hardware, so ordering a “standard 8-foot panel” without confirming your series is the single most common misfit we correct.

To identify yours, look at the top rail profile and measure center-to-center post distance. Steel ornamental typically runs on 6-foot or 8-foot spacing depending on the line. Aluminum often sits on similar centers but with different bracket ears. If you’re unsure, photograph the post bracket and the rail end; we can match it against the Ameristar catalog before anything ships.

OEM parts match your series exactly and hold the finish consistent panel to panel. Quality aftermarket equivalents can save money on decorative pickets or caps, but we won’t substitute structural brackets or post anchors with generics. Groundwork Construction Co. of Dallas is an independent service provider, not affiliated with Ameristar, so we’ll tell you plainly when OEM is the right call and when it isn’t.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Ameristar Fence Installation Is Failing

Ameristar fencing is built to last, but the installation below and around it is where Dallas jobs fail. Watch for these:

  • Posts leaning or rocking. Concrete footings that were set too shallow or poured loose can’t hold in North Texas clay that swells and shrinks with the seasons. A post that wiggles at the base has usually lost its footing, not its strength.
  • Rust bleeding at the welds or post caps. Ameristar’s powder coat holds up well, but any chipped edge or scratched cap becomes the starting point for rust in Dallas humidity. Once corrosion begins inside a welded joint, the finish peels from the inside out.
  • Gates sagging or dragging the ground. Hinge hardware loosens and gate posts take more stress than line posts. A dragging gate usually means a failing hinge or a post that’s shifted, not a bent frame.
  • Panels rattling or out of plumb after storms. Straight-line winds and hail bend brackets and knock panels out of true. Ameristar steel flexes well, but the bracket ears and rail caps are the weak points.
  • Uneven panel bottoms along the ground. This is a grade problem, not a fence problem. If the original install followed a sloped Dallas lot without stepping the panels, the fence looks wrong and collects debris at the low end.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Replacement and installation pricing for Ameristar fencing in Dallas falls in the $3,500 – $9,000 range for a typical residential run. What drives the number:

Line item Typical Dallas range
Standard ornamental fence install (up to ~150 linear ft) $3,500 – $6,500
Larger runs, multiple gates, pool-code aluminum $6,500 – $9,000
Gate hardware and self-closing hinges Included in quote
Concrete footings, setting, and cleanup Included in quote

We give you the parts plus labor broken out, so you can see where the money goes. Every install is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. No change orders after the fact, because the number you see is the number you pay.

DIY or Call Us?

Some things you can safely check yourself: measure post spacing, photograph the bracket and rail end, and look for rust or loose caps. What you should not attempt is resetting post footings or re-tensioning a structural gate frame. A concrete footing that’s set wrong below grade won’t show its failure for months, and a gate that lets go under load can injure someone or damage the fence. Post-hole work in Dallas clay is especially unforgiving – the wrong footing depth is why fences fail two seasons later.

If you want the Ameristar system matched correctly the first time, with proper footings and warranty coverage, call (844) 797-4808 for a free estimate. A live person answers around the clock. We’re also happy to talk through your KraftMaid, Cambria, or Silestone projects from the same visit.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch