Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Kitchen Remodeling: The Dallas Owner’s Guide
We install Ameristar-compatible kitchen packages across Dallas, and full kitchen remodeling here typically runs $14,000 – $45,000 installed. If you’re stuck on a single failed component, cabinet door replacement, drawer slide repair, or hinge swap is usually a one-visit job once we’ve matched your model. The quickest way to a real number is a free estimate at (844) 797-4808.

Owners rarely wake up expecting a parts problem. It starts with a sagging door on the pantry cabinet, a drawer that drags by the third pull, or a hinge that squeaks louder than the kids. In a Dallas kitchen, the other early warning is a cabinet box that’s gone soft along the toe kick after a humid June. You check the model sticker, discover the Ameristar name, and realize the part is specific – not something you’ll find at a big-box shelf.
Key Takeaways
- Full Ameristar kitchen remodeling in Dallas: $14,000 – $45,000 installed.
- Cabinet installation alone: $4,000 – $13,000; countertops $2,000 – $6,500; backsplash $800 – $2,500.
- Ameristar part numbers vary by model line – measure before you order anything.
- We’re an independent contractor, not affiliated with Ameristar, and we keep no parts in stock.
Which Ameristar Models This Applies To
Ameristar’s kitchen cabinets and vanities are sold as package lines rather than a single fixed family, so the part you need depends on the model number stamped on the inside face of the door, the inside of the box, or the drawer bottom. Door hinges, drawer glides, and cabinet hardware differ between lines – a hinge that fits one Ameristar collection will often miss the pilot holes on another by a quarter inch. Measure the door thickness, the hinge cup bore, and the drawer glide length before you order.
The OEM-versus-aftermarket call matters more on Ameristar than on premium brands. Ameristar replacement doors in the same finish and profile can be harder to source than the cabinet box hardware, and finish lots shift, so a newly ordered door sometimes reads a shade off in a Dallas room with direct afternoon sun. Our approach is to match the hardware exactly and photograph the existing finish under your actual kitchen lighting before we spec any new door. If a full cabinet installation at $4,000 – $13,000 beats chasing a discontinued door, we’ll tell you that plainly – we won’t sell a part swap that costs more than a new run of cabinets.
If you’re also weighing brand partners, we work with KraftMaid, Cambria, and Silestone alongside Ameristar-compatible work, so the decision stays grounded in what fits your budget, not what a shelf happens to stock.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Kitchen Remodeling Is Failing
- Doors that sag at the outer edge. The hinge screws have pulled out of the particleboard core, a common issue in kitchens built before humidity control was standard in Dallas homes.
- Drawers that drag or stick halfway. The glide has worn or the box has swelled from a slow water leak under the sink – often the leak is older than the drawer symptom.
- Soft, spongy cabinet floor or toe kick. Water damage, not cosmetic wear. Left alone it spreads to the adjacent cabinet run and the subfloor.
- Delaminating door finish near the hinges. A sign the Ameristar door has absorbed moisture and the laminate is lifting at the fastener points.
- Countertop seams opening at the cabinet line. The cabinets below have shifted, which pushes the seam open and stresses the backsplash tile.
One thing worth knowing: cabinet hardware and hinges on Ameristar line differently than their decorative knobs and pulls. The decorative hardware swaps year to year, but the load-bearing hinge and glide geometry is what keeps the door hanging true.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s where the Dallas market actually lands, installed, for the parts and repairs behind an Ameristar kitchen:

| Scope | Installed price range |
|---|---|
| Full kitchen remodeling | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: the number of cabinet boxes, whether we’re matching existing finishes or replacing a full run, plumbing and electrical relocation, and countertop material. We quote parts and labor separately, in writing, so you see the line-item cost of the hinge set or the glide kit next to the install hours. The number you see is the number you pay. Every project is covered by our 730-Day Done Right Promise – if a hinge we hung fails before that window closes, we make it right.
DIY or Call Us?
You can safely handle the diagnostics. Open the door, check the hinge screws and the cup bore, measure the drawer glide and the door thickness, photograph the model sticker, and note the finish code. That’s the work that saves us a trip and gets you a faster, more accurate quote.
Where DIY goes wrong is the install. Cabinet boxes are heavy, held by nothing but a few screws into studs, and an overhead cabinet that pulls loose on a Dallas resident is a real injury risk. Countertop seams and backsplash tile require precise shimming – get it wrong and the seam reopens in a year. We handle the heavy lifting with background-checked, uniformed technicians and a live person answering the phone 24/7, even when you’re just calling to confirm a part number.
Call (844) 797-4808 for a free estimate and design consult. We’ll confirm the model, price the part, and tell you whether it’s a one-visit fix or a candidate for a full replacement run.
FAQs
Cabinet boxes typically last 15 – 25 years in Dallas, and hardware (hinges and glides) usually fails first at the 8 – 15 year mark. Our technicians have up to 12 years of experience matching and installing these parts, so we can tell you from the model number whether you’re on the hardware-replacement track or the full-cabinet track. Call (844) 797-4808 for an exact quote – estimates are free.
Often, yes. Hinge screws that have stripped can be re-bored and re-anchored, and drawer glides can sometimes be adjusted rather than swapped. When the cabinet floor has gone soft from water damage, though, repair rarely holds and the box needs replacing. We’ll tell you which one you’re facing after we see it.
A hinge or glide swap is typically a single visit, often under two hours. A door replacement depends on the finish match and shipping, and a countertop seam repair can span two visits. Most part-and-hardware jobs are completed during a single visit once the parts are on-site.
We match your model sticker to the correct OEM part or a verified compatible equivalent, photograph the finish in your kitchen lighting, and order once you approve the line item. We keep no parts in stock and carry none on a truck – every part is sourced to your cabinet, not pulled from a bin. Call (844) 797-4808 to start the match.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.