A Groundwork company - serving Dallas, TX

Barrette Fence Installation in Dallas, TX

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Barrette Fence Installation: The Dallas Owner’s Guide

We install Barrette brand fencing for Dallas homeowners, and typical installed pricing runs $3,500 to $9,000 depending on fence length, style, and grade changes. Barrette’s vinyl and ornamental lines are engineered systems, not generic panels, so the installation details that keep a Dallas fence standing for decades matter more than most homeowners realize. Owners usually call us when a gate starts dragging, a post leans after a heavy rain, or a panel pops loose in the middle of a run. Those symptoms almost always trace back to how the fence was set, not to the product itself.

Two construction workers installing a new wooden privacy fence with metal posts in Dallas, TX

Call (844) 797-4808

Key Takeaways

  • Installed Barrette fence projects in Dallas run $3,500 to $9,000.
  • Most failures in Dallas come from shallow posts and clay-soil movement, not the panels.
  • We source genuine Barrette-compatible components and back the work with our 730-Day Done Right Promise.
  • Groundwork Construction Co. of Dallas is an independent installer, not affiliated with Barrette.

Which Barrette Models This Applies To

Barrette makes a wide range of fence lines, but the ones we install most often in Dallas fall into two families: vinyl privacy styles and ornamental aluminum and steel. Vinyl lines like the Bufftech and Grand Illusions collections cover the classic privacy looks most homeowners want. Ornamental lines like the Barrette aluminum series suit front-yard runs and gates where a metal look matters. The installing contractor needs to know the exact line before ordering panels and posts, because hardware and rail measurements differ between them.

Here’s the compatibility gotcha that trips up even experienced crews: Barrette vinyl posts are usually set at 4 feet on center for a standard privacy run, but panel widths vary by collection, and mixing a post from one series with a panel from another is a guaranteed failure. We measure existing posts before we order anything. For decorative caps and gate hardware, OEM parts always fit correctly. Aftermarket caps and hinges can work, but they rarely match the original color line and they often void any Barrette warranty on that section. Our technicians have up to 12 years of experience with these systems, and we know which parts need to be exact and which ones are safe to match generically.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Barrette Fence Installation Is Failing

Dallas weather stresses a fence in ways that a quick visual inspection won’t show. The five symptoms below account for most of the calls we get, and each points to a specific cause worth checking.

  • Leaning posts. Post holes backfilled with loose soil or set too shallow give way during North Texas wet periods. In older Dallas neighborhoods with expanding clay, a post set under 24 inches will usually lean within a season or two.
  • Loose or popping panels. Panels that don’t seat in the rails, or rails that weren’t fully inserted, work loose in wind. On a vinyl system, this usually means the rails were cut short or the post spacing was off.
  • Discoloration or chalking on vinyl. Dallas UV exposure is intense, and vinyl that chalks heavily usually hasn’t been cleaned in years. A white, powdery film is surface oxidation, not a structural failure, but it signals it’s time for a wash and a close look.
  • Gate sag or drag. Gate hinges bear the load on every swing, and a sagging gate often means the hinge screws have backed out or the hinge plate has fatigued. Catching it early usually means a hinge swap, not a full gate replacement.
  • Rail rot on wood-topped or hybrid fences. If your Barrette system has wood accents, Dallas humidity degrades untreated rails fast. Rails that flex or show dark streaks are candidates for replacement.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Fence installation pricing from Groundwork Construction Co. of Dallas for a Barrette project typically falls in the $3,500 to $9,000 range. What drives the final number: linear feet and fence height, whether we’re replacing an existing fence or starting fresh, the line you choose (vinyl privacy sits lower in the range, ornamental aluminum runs higher), gate count, and how many posts need proper concrete footing in Dallas clay. We price materials and labor together in one upfront number, so you see the whole scope before work begins.

Two construction workers installing a new wooden privacy fence with metal posts in Dallas, TX

Every fence we set is backed by our 730-Day Done Right Promise. If a post leans or a panel fails through poor installation, we make it right. We offer a free project estimate and design consult, and 0% financing for 18 months is available if you’d rather spread the cost. If your scope crosses into other outdoor work, we also handle driveways and pavers, and we partner with brands like Belgard, plus KraftMaid, Cambria, and Silestone on indoor projects.

DIY or Call Us?

What you can safely check yourself: look for loose hinge screws and tighten those, look for visible gaps between posts and panels, and note any leaning posts. Cleaning vinyl with a garden hose and a mild cleaner is a fine owner-maintained job. What you shouldn’t try to fix yourself is post resetting in Dallas clay or hinge replacement on a run that’s already leaning. That work means pulling a panel, digging a new footing, re-seating the post, and re-leveling the run. Doing it wrong on clay makes it worse. For anything past a hinge and a hose, call us at (844) 797-4808.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch