Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Windows & Doors: The Dallas Owner’s Guide
We install and service Barrette windows and doors across Dallas, and a typical window replacement runs $4,500 – $15,000 while impact-rated units land between $8,000 and $25,000, with most single-unit swaps finished in a single visit. Same-day service is available when the part is in hand and the opening is a standard size. Groundwork Construction Co. of Dallas is an independent service provider and is not affiliated with Barrette.

Owners usually find the failure the same way. A window that used to glide now needs a shoulder to close. A patio door drags on the sill in the back of a Lakewood bungalow. Water shows up on the interior trim after a June storm, or a dual-pane unit goes cloudy between the glass and you realize the seal gave out months ago. By the time you’re searching for a part, the hardware or the glazing has already been telling you for a while.
Which Barrette Models This Applies To
Barrette makes windows and doors under several product lines, and the part you need depends entirely on which line and series you have. Vinyl single-hungs, sliders, casement units and patio doors each use different balances, rollers, locks and weatherseal profiles, and the same style built in different years can take a different replacement part. Before you order anything, pull the manufacturer label. On most Barrette units it sits in the head jamb channel or the side jamb, and it carries the series name, the unit size and a production code.
Here’s the gotcha that burns Dallas owners: a part that looks identical to the one that came out often isn’t. Spiral balances and block-and-tackle balances can share a footprint but differ in tension rating, and a slightly mismatched balance is why a “fixed” window slams shut a month later. Measure the visible glass, the frame width and the balance length, and match the label to the series. Blind-buying by photo is the single most common reason a part gets returned.
On the OEM-versus-aftermarket call, we’re straight with you. For cosmetic pieces and standard weatherseal, a quality aftermarket equivalent performs fine and costs less. For structural or tension-loaded components, match the original spec, because the wrong rating is a callback waiting to happen. We don’t stock parts and we don’t carry them on a truck; we identify the exact part from your label and measurements, then source it to your unit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Windows & Doors Is Failing
- The sash won’t stay up. That’s a worn or snapped balance. On a double-hung, the balance carries the sash weight, and when it lets go the window drops and can crack the glass on the sill.
- The door drags or scrapes the sill. Usually a failed roller or a sagging hinge on a patio door. Texas heat expands the frame and the panel, so a marginal roller that worked in cooler months starts catching once summer hits.
- Fog or condensation between the panes. The insulated glass seal has failed. The unit is still structurally sound, but the argon is gone and the glass has to be replaced, not cleaned.
- Water on the interior trim or sill after rain. A worn weatherstrip, a failed corner seal or a clogged weep channel. Left alone through a Dallas storm season, it rots the rough opening behind the frame.
- The lock won’t latch or the handle turns loose. A worn keeper or a stripped lock mechanism. This one is a security item, not just an annoyance, because a door that won’t latch isn’t locking.
One honest note on safety. If your issue involves a garage door or any high-tension component, stop and call a trained technician. Springs and cables under load can cause serious injury, and there’s no safe way for a homeowner to work on them. Window and door hardware is a different story, but the same rule holds: if it’s under tension and you’re not sure, don’t force it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Dallas, a full window replacement runs $4,500 – $15,000 and impact window installation runs $8,000 – $25,000. A single balance, roller, lock or weatherseal repair sits far below a full replacement, so the smart move is to price the repair before anyone talks you into new units.
| Scope | Installed Range (Dallas) |
|---|---|
| Single hardware part (balance, roller, lock, weatherseal) | Repair-level pricing, quoted per unit |
| Window replacement | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
What drives the range: the number of units, the size and glass package, whether the opening needs reframing, and impact versus standard glazing. You get upfront pricing, no surprises. Your written quote is line-itemed down to the part and the labor, the number you see is the number you pay, and every job carries our 730-Day Done Right Promise. The number you see is the number you pay. If it’s not done right, we make it right.
DIY or Call Us?
You can safely check a few things yourself. Confirm the label on the jamb, measure the glass and frame, tighten visible screws on handles and keepers, and clear debris from weep channels with a soft brush. That tells you what part you’re dealing with.
Where DIY goes wrong: forcing a stiff balance, prying a sash that’s binding, or swapping an insulated glass unit without the right suction cups and setting blocks. A mis-set glass unit leaks, and a mis-rated balance drops a sash that can break the pane below. For anything under tension or involving the sealed glass, call (844) 797-4808 and let a background-checked, uniformed technician handle it. You’ll get a free estimate, and a live person answers 24/7.
FAQs
Most Barrette units hold up well, but Dallas heat and storm cycling wear the moving parts faster than the glass. Expect hardware like balances, rollers and weatherseal to be the first things to go, often well before the frame or glass fails. Call (844) 797-4808 for an exact quote on your units, and estimates are free.
Often yes. A single balance, roller, lock or weatherseal can be repaired without replacing the whole window or door. The exception is a fogged insulated glass unit or a cracked frame, which needs the glass or unit swapped rather than a small fix. Call (844) 797-4808 and we’ll tell you honestly which one you’re facing.
Most single-part repairs and single-unit swaps are finished in a single visit. Full window replacements over multiple openings take longer because of removal, reframing and finishing. Call (844) 797-4808 and we’ll give you a realistic timeline before we start, not a promise we have to walk back.
We identify the exact part from your Barrette label and measurements, then order to your series and unit size. We don’t stock parts and don’t carry them on the truck, so sourcing is matched to your window or door rather than grabbed off a shelf. Call (844) 797-4808 to get started.
Call Groundwork Construction Co. of Dallas at (844) 797-4808 to schedule your free estimate on your Barrette windows and doors. We bring paid-in-full expertise to the job, a written line-item quote up front, and the 730-Day Done Right Promise behind every install. We also service KraftMaid, Cambria and Silestone projects across the Dallas area, so a single call can cover more than one part.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.