Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Bathroom Remodeling: The Dallas Owner’s Guide
A Belgard bathroom remodel in Dallas typically runs $9,000 – $28,000 installed, covering demo, substrate repair, tile and paver surfaces, fixture setting, waterproofing, and permit-ready plumbing rough-in. Smaller scope jobs, like a vanity and floor refresh, land closer to $5,000 – $12,000. We don’t promise same-day work on bathroom construction because real remodeling doesn’t happen in a day, but calls to (844) 797-4808 are answered by a live person 24/7 and we schedule estimates fast.

Most Dallas owners find trouble the same way: a grout line on the shower floor that stays dark no matter how hard they scrub, a tile edge near the tub that flexes when stepped on, or a musty smell that shows up a week after the AC starts running in May. Those are the early signals. By the time a tile pops loose or water stains the ceiling below, the substrate has usually been wet for months.
Which Belgard Products and Systems This Applies To
Belgard is known for hardscape – pavers, retaining wall block, and outdoor living systems – and its interior-adjacent masonry products show up in Dallas remodels more often than people expect. Wet-room floor tile laid over a paver-style substrate, decorative wall block used as a half-wall or pony wall next to a tub, and Belgard’s porcelain and stone-look surface lines are the ones we see most. If your material is stamped on the back or edge with a Belgard mold number, that code plus the finished dimensions (length, width, thickness in millimeters) is what we use to match a replacement. Thickness is where most owners guess wrong: 60mm and 80mm profiles are not interchangeable in a shower pan or on a sloped floor, and a mismatched thickness will telegraph through the finished surface within a season.
OEM Belgard pieces match color and texture exactly, which matters if you’re patching a visible area. Quality aftermarket equivalents can work for hidden substrate and backer layers, but on a bathroom floor or wall where the material shows, the dye lot and surface finish difference is usually visible even to a casual eye. We source the actual Belgard line whenever a match matters, and we tell you plainly when aftermarket makes sense and when it doesn’t. We work with Belgard as an independent contractor and are not affiliated with the brand.
We also handle KraftMaid cabinetry, Cambria and Silestone surfaces when a Belgard bathroom project turns into a full refresh.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Bathroom Surface or System Is Failing
Bathroom failures in Dallas follow patterns. North Texas soil movement, hard water, and long humid summers put stress on every joint and seal. Here’s what to watch for and why each symptom happens:
- Grout that stays dark after cleaning. Water is getting behind the grout into the substrate. In Dallas’s hard water, mineral deposits also etch grout and open microscopic channels that speed the process up.
- Tiles or pavers that sound hollow when tapped. The bond has broken and the piece is sitting loose on the substrate. This is the stage where a repair is still cheap; wait longer and water pools in the void.
- Flex or movement underfoot near the drain or tub. The subfloor or mortar bed has lost integrity, often from a slow leak. Dallas slab foundations and wood-framed floors both show this, and both need attention before the surface is re-set.
- Efflorescence – white powdery bloom on the surface. Moisture is migrating through the material and evaporating on the face. In a bathroom this almost always means a waterproofing membrane has failed somewhere behind the tile.
- Musty odor that returns after cleaning. Mold or mildew is growing in a concealed wet zone. By the time you smell it, the affected area is generally larger than the visible stain.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost and What’s Included in Dallas
A full Belgard bathroom remodel in Dallas runs $9,000 – $28,000. The low end covers a standard hall bath with new floor surface, a vanity, and re-set fixtures. The high end covers a primary bath with a walk-in shower, decorative wall block, custom tile work, and plumbing relocation.

- Walk-in shower installation: $4,500 – $12,000
- Tub-to-shower conversion: $3,500 – $10,000
- Shower replacement: $3,000 – $8,500
- Bathroom vanity installation: $800 – $3,000
- Small bathroom remodel: $5,000 – $12,000
What moves the number: substrate condition once we open the floor, waterproofing membrane scope, fixture grade, and whether plumbing has to move. Our quotes are line-item and fixed – the number you see is the number you pay. Every job is covered by the 730-Day Done Right Promise, and we pull the permits required by the City of Dallas so the inspection passes on the first walk-through.
DIY or Call Us?
You can safely check surface conditions yourself: tap tiles for hollow sounds, look for efflorescence, check the caulk line at the tub, and note where grout is cracking. That information helps us quote accurately. What you should not do yourself is remove a shower pan, cut into a waterproofing membrane, or open a wall to trace a leak. A failed membrane isn’t visible from the surface, and the repair you think you’re making usually makes it worse. Bathroom drain and supply work in Dallas also requires a licensed plumber under Texas rules; we bring the right trade to every phase.
If the surface is failing, call (844) 797-4808 for a free estimate. We’ll tell you whether it’s a patch or a replacement, honestly, and put the scope in writing.
FAQs
A properly installed Belgard surface in a Dallas bathroom lasts 30 to 50 years if the waterproofing behind it holds. The surface itself rarely fails first – the membrane and grout seal do, usually within 10 to 15 years under Dallas’s humidity and hard water. Resealing grout every 2 to 3 years extends both.
Sometimes, yes – a single loose tile or a cracked grout line is a repair. Once efflorescence or a musty smell shows up, the issue is almost always behind the surface and a full replacement of the affected zone is the better call. We’ll tell you which one you’re looking at in the estimate.
A standard bathroom remodel in Dallas takes 2 to 4 weeks from demo to final walk-through. A full primary bath with plumbing relocation runs 4 to 6 weeks. We give you a written schedule before we start.
We match by the mold code stamped on the piece and its exact dimensions in millimeters, then order through Belgard’s supply chain with a dye-lot match when the material will be visible. We don’t carry stock on a truck – the right piece gets ordered for your job, delivered, and installed. Call (844) 797-4808 to start the match.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.