A Groundwork company - serving Dallas, TX

Belgard Home Additions & ADU in Dallas, TX

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Belgard Home Additions & ADU: The Dallas Owner’s Guide

We build Belgard-compatible home additions and accessory dwelling units in Dallas, and a typical installed project runs $45,000 to $130,000 for an addition and $90,000 to $220,000 for a full ADU. The most common complaint we hear isn’t about the framing or the roof. It’s about what happens where Belgard masonry meets the existing house: hairline cracks at the mortar joints, water staining below the sill line, and a section of wall that feels soft when you press on it after a hard Dallas rain. That junction is where most of these structures fail first, and it’s what homeowners call us about.

professional home additions & adu service in Dallas, TX

Call (844) 797-4808

Key Takeaways

  • Installed addition cost in Dallas: $45,000 – $130,000. Full ADU: $90,000 – $220,000.
  • Belgard block systems expand and contract harder in North Texas heat swings than in coastal or northern markets.
  • Failure almost always starts at a joint or a flashing line, not in the middle of a wall.
  • We’re an independent contractor. We’re not Belgard, and we don’t claim to be.
  • Every build is backed by our 730-Day Done Right Promise.

Which Belgard Models This Applies To

Belgard makes a broad line of hardscape and wall block, and the system on your addition or ADU could be any of several product families. The ones we see most often on residential work in Dallas are Belgard’s retaining and freestanding wall systems, including the Aberdeen and Belair wall block lines, and their structural SRW products used for grade retention against an addition. The exact name is usually stamped on the block, molded into the back face, or printed on the pallet banding, and it’s also in your original project drawings if the previous builder left them.

Get the model wrong and the whole fix goes sideways. A face block from one wall system won’t interlock with the units from another, even when they look the same from ten feet. Measure the block’s face height and depth in inches before you call anyone. That single measurement narrows the field faster than a photograph.

The OEM-versus-aftermarket call matters here. Belgard OEM block guarantees the interlock geometry and the color match to your existing wall. A generic aftermarket wall block can save 15 to 25 percent on material, but the cap course will tell on you, and the piece will sit slightly proud of the original run. On a visible street-facing ADU, that difference is the one thing your neighbor notices. On a grade-retaining wall hidden behind the structure, aftermarket is a reasonable trade.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Belgard Home Additions & ADU Is Failing

  • Hairline cracks at the mortar joints that keep reopening. These usually mean the footing has shifted under seasonal soil movement. Dallas has expansive clay, and it moves more than most homeowners expect between a wet spring and an August dry spell.
  • Water staining or efflorescence below the sill or cap line. Efflorescence is the white salt bloom that appears when water is getting into the block and evaporating back out. It’s telling you the flashing detail is compromised, not that the block is defective.
  • A wall that sounds hollow or feels soft when pressed. This is moisture trapped behind the face. Left alone through a North Texas summer, it turns into spalling and face loss, and the repair costs roughly triple.
  • Visible leaning or bulging over 1/4 inch across a 4-foot straightedge. On a retaining application against an addition, that’s a lateral-load problem. Get it looked at before the next big rain event.
  • Capstones rocking underfoot or pulling away from the course. Failed adhesive at the cap is a small fix when caught early and a major re-lay once water has had a couple of seasons to work in.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

We price these projects as a specific, line-itemized scope, not a rounded number that moves once work starts. Here’s the honest Dallas range:

Scope Installed Price (Dallas)
Home Addition (Belgard masonry exterior, full build) $45,000 – $130,000
ADU Construction (detached, full build) $90,000 – $220,000
Garage Conversion to ADU $30,000 – $80,000
Targeted wall re-lay or section replacement on existing Belgard work Quoted by scope after a site visit

What drives the top of the range: foundation depth required to get below Dallas’s active clay zone, the block system selected, and how much sitework is needed to daylight the drainage. What drives the bottom: a simple footprint, existing slab or footing you can build on, and a standard block selection. Every proposal includes a written line-item for material and labor separately so you can see where the money goes. Our technicians have up to 12 years of experience on these builds, and the work is covered by the 730-Day Done Right Promise.

DIY or Call Us?

You can safely check a lot of this yourself. Run a level across the wall and note the gap. Press the face and listen for hollow areas. Look for white bloom or dark staining around flashings and the cap. Take the block face measurements and photograph the back stamp. All of that is diagnostic and safe.

What we don’t recommend is pulling a section of wall or a load-bearing course to see what’s behind it. On a Belgard structural wall retaining grade against an addition, that’s a load-bearing assembly. Removing the wrong unit can unzip a course or open a line the rest of the structure is holding. Same story for re-mortaring a section you haven’t diagnosed. The joint reopens because the footing moved. Patching the joint hides the symptom and costs you a season.

If you’ve found cracks, staining, or movement, call us at (844) 797-4808 for a free estimate. We’ll tell you what the scope actually is and what it costs before you commit to anything.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch