Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing in Dallas, TX: The Dallas Owner’s Guide
Boral Roofing: The Dallas Owner’s Guide
Boral makes clay and concrete roof tile, plus the accessory parts that hold a tile roof together: hip and ridge caps, starter tiles, underlayment and the flashing that seals every penetration. In Dallas, a tile repair using Boral-compatible parts runs $600 to $2,500, and full replacement with Boral tile runs $8,000 to $20,000. Because the failure usually shows up as a slow leak rather than a dramatic collapse, most owners first notice it as a brown water stain on a ceiling, a section of shifted tile after a storm, or grit and broken tile edges piling up in a gutter. If that sounds familiar, you’re in the right place. We install and repair Boral tile roofs across Dallas, and we’re an independent contractor, not affiliated with or endorsed by Boral.

Which Boral Models This Applies To
Boral tile roofs you’ll find on Dallas homes fall into two families. The clay side runs profiles like Saxony 900 and the Barcelona line, with a hard, dense body that shrugs off heat. The concrete side runs profiles like Saxony and Madera, molded to look like clay or shake, and it’s the one you’ll see on a huge share of suburban Dallas roofs because concrete tile is the more common choice at this price point. The profile, not just the brand, is what matters when a tile breaks or a ridge cap fails.
Here’s the compatibility gotcha most owners miss: matching a tile by brand alone isn’t enough. You need the same profile, the same color lot if you want an invisible patch, and the same dimensions, because a tile from a neighboring profile won’t interlock cleanly with yours. Old color lots fade differently than new ones, so even a perfect match in the same color name reads slightly off in bright North Texas sun.
To identify your part, look at the underside of a broken tile for the stamped profile name and any mill marks, and measure the exposed face width and the tile length. Photograph the tile’s edge profile against a tape measure. That photo is worth more than any description when we’re sourcing the match, and it’s usually enough to get the right piece the first time instead of the third.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Roofing Is Failing
Tile failure is rarely one dramatic event. It’s a slow chain, and the earlier you catch a link, the cheaper the fix.
- Hairline cracks across the tile face. Thermal cycling cooks a Dallas roof hard: 100°F-plus summers and occasional freezes make clay and concrete expand and contract, and over time those hairline cracks open up and let water past the surface. A single cracked tile is a small repair. A field of them means the roof is aging out.
- Tile slipping or sliding out of alignment. When the fasteners or the underlayment beneath the tile start to go, tiles drift from their course and the clean straight lines go crooked. That exposed gap is where water gets under the tile and starts working on the deck.
- Water stains on the ceiling or attic sheathing below. The tile is a rain screen, not the waterproof layer; the underlayment is. So a leak usually points to failed underlayment or flashing around a penetration, valley or chimney, not to the tile itself.
- Flashing pulled away or rusted at pipe boots, valleys and chimneys. These are the seams where tile roofs actually leak, and a Boral tile roof is only as good as the flashing tying it into the rest of the house.
- Granular grit and broken tile edges collecting in the gutters. This is often the first visible hint of tile breakdown, and Dallas storms hurry it along by pelting the roof with debris and driving wind under the caps.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Dallas, tile roof repair with Boral-compatible parts runs $600 to $2,500, and a full Boral tile roof replacement runs $8,000 to $20,000. Here’s the line-item picture, all upfront pricing with no surprises:
- Boral-compatible replacement tile and ridge caps: priced per piece and per profile.
- Underlayment and flashing: the waterproof layer and the seams that do the real work.
- Labor: removing damaged pieces, resetting tile to course, and cleaning up.
- Full replacement: tear-off, deck check, underlayment, new tile and caps.
The range swings with roof size, how much tile is damaged, and whether it’s a patch or a full tear-off. A two-tile repair sits at the bottom. A leak that’s been soaking the deck for a season, or a replacement on a large 3,000-square-foot-plus Dallas roof, sits at the top. Every quoted job is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. The number you see is the number you pay.
DIY or Call Us?
Tile roofs aren’t the place for a Saturday ladder project, and we’ll say that plainly. You’re working at height on a steep, unforgiving surface, and under a Boral tile roof sits the waterproof underlayment and flashing that actually keep your house dry. Getting the tile back on without breaking the seal above it can turn a small repair into a big one. The honest split: you can safely check from the ground with binoculars, and from inside the attic you can look for water stains and wet decking. That’s it.
Leave walking the roof, lifting tile and matching the profile to us. Our technicians have up to 12 years of experience, show up background-checked and in uniform, and carry the expertise to source your exact part and seat it correctly. Calls are answered by a live person, 24/7, so you’re never stuck in a voicemail hole. Built to last, backed in writing. Call (844) 797-4808 for a free estimate.
Frequently Asked Questions
A properly installed Boral clay or concrete tile roof can last 40 to 50 years or longer, but the tile often outlives the underlayment beneath it. In Dallas heat, the underlayment and flashing are usually what need attention first, while the tile itself keeps holding up. Call (844) 797-4808 and we’ll inspect what’s actually wearing out.
In most cases a cracked or slipped tile and failed flashing can be repaired without touching the rest of the roof. Full replacement only makes sense when the underlayment is failing across large areas or the deck has water damage. We’ll tell you honestly which one you’re looking at, and the estimate is free.
A small tile repair usually finishes in a single visit, while larger repairs or a full replacement take longer depending on roof size and access. We give you a clear timeframe before work starts, and most jobs are completed in a single visit. Call (844) 797-4808 for a realistic schedule on your Dallas roof.
We start from your tile’s stamped profile name and a measured photo of its edge, then match profile, dimensions and color lot before ordering. If your exact profile or color lot is discontinued, we’ll tell you that upfront and show you the closest matching options. No guesswork, no surprises on the final number.
If you’re weighing other material brands on your home, we also work with KraftMaid, Cambria and Silestone. Call (844) 797-4808 for a free estimate and design consult on your Dallas roof. From foundation to finish line, one contractor you can trust.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.