Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boxabl Bathroom Remodeling: The Dallas Owner’s Guide
We install Boxabl-compatible bathroom remodeling in Dallas, and a full bathroom renovation typically runs $9,000 – $28,000 installed, with smaller scope work landing in the $5,000 – $12,000 range. Scheduling is planned, not same-day: a bathroom remodel is a multi-trade job and we quote a realistic timeline up front. Most Dallas owners come to us after a bathroom fixture or finish starts failing inside their Boxabl unit – a shower pan that flexes underfoot, a vanity that’s pulling away from the wall, or caulk and grout that keeps reopening along the wet wall. Those symptoms usually trace back to how a prefab module moves and settles in North Texas ground conditions.

We’re an independent service provider. We don’t manufacture Boxabl and we’re not affiliated with them, but we know how their modules are built and what fits inside them.
Which Boxabl Models This Applies To
Boxabl’s Casita is the unit most Dallas owners have on site, and its bathroom comes assembled as a wet core built into the module – shower, toilet, and vanity in a compact footprint. When you’re sourcing a replacement fixture or finish, the model and serial label on the module (usually near the electrical panel or on the exterior frame) tells us the production run, and that’s what we match parts against. A Casita bathroom’s dimensions and rough-in locations are tighter than a site-built bath, so a standard big-box vanity or shower surround often won’t drop in without modification.
Here’s the decision Dallas owners actually face: OEM parts match the original exactly and preserve resale documentation, but lead times and cost run higher. Quality aftermarket equivalents – right-size shower pans, custom-cut surrounds, and fixtures from brands like Kohler – often fit better and come with a stronger warranty. We’ll price both and tell you which one makes sense for your unit. We don’t stock parts and nothing rides on a truck; each piece is sourced to your module’s specs before install day.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boxabl Bathroom Remodeling Is Failing
Prefab bathrooms fail differently than site-built ones. Watch for these:
- Flexing or spongy shower pan. The subfloor or pan support has shifted, a common result of Texas clay soil movement settling the module. Left alone, the pan can crack and leak into the floor structure.
- Reopening caulk and grout lines. Thermal expansion in a DFW summer cycles a module’s shell, and rigid joints crack. Repeated failures point to a movement issue, not bad caulk.
- Vanity pulling from the wall or wobbling. Fasteners backing out of the module’s framing as it settles. Catch it early and it’s a refasten; ignore it and the cabinet can fail.
- Water pooling at the drain or low spots in the floor. A sign the pan or floor membrane has lost its slope, which can mean hidden moisture below.
- Sticking doors or gaps around the shower surround. The module has shifted slightly. Gaps let water behind the surround, and that’s where real damage starts.
If you see pooling or a soft spot underfoot, stop using that shower and have it looked at. Water behind a prefab wet wall is hard to spot until the floor gives.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing for a Dallas Boxabl bathroom remodel depends on scope and whether we’re matching OEM or a premium aftermarket fit:

- Small bathroom remodel: $5,000 – $12,000
- Full bathroom remodel: $9,000 – $28,000
- Shower replacement: $3,000 – $8,500
- Walk-in shower installation: $4,500 – $12,000
- Tub-to-shower conversion: $3,500 – $10,000
- Bathroom vanity installation: $800 – $3,000
What drives the range: unit access on your Dallas lot, whether the floor structure needs repair under a failed pan, and finish level. Every quote is upfront pricing, no surprises, in writing – parts and labor line by line. The work is covered by our 730-Day Done Right Promise. We also work with KraftMaid, Cambria, and Silestone for cabinetry and surfaces if you’re upgrading while the wall is open.
DIY or Call Us?
You can safely caulk a joint, clean a drain, and check the module label to ID your model. What goes wrong with DIY on a Boxabl wet core is the hidden side: cutting into the surround to chase a leak, re-setting a shower pan without the right slope, or re-securing a vanity into framing you can’t see. Those mistakes turn a $3,000 fixture swap into floor repair. This isn’t dangerous the way an electrical panel is, but water damage behind a wall gets expensive fast. One honest rule: if you’re touching the pan, the membrane, or anything structural, hand it to someone who knows prebuilt modules. Call (844) 797-4808 and we’ll tell you whether it’s a fix or a replacement.
FAQs
A well-installed shower pan and surround should hold up 15 – 25 years, but Dallas heat and clay soil movement can shorten that. If you’re seeing flex or reopening joints within a few years, the cause is usually settlement, not the part.
Sometimes yes – a re-caulked joint or refastened vanity is a repair. A cracked pan or a surround with water behind it gets replaced, because repairing the surface without fixing the cause just moves the failure downhill.
Most single-fixture swaps finish in a day, and a full bathroom remodel runs several days depending on tile and cabinetry. We give you a real timeline in the quote, not a best-case number.
We identify your module from its label and match dimensions and rough-ins to either the OEM part or a quality aftermarket equivalent. We don’t carry stock; we source to your unit’s specs and confirm fit before install day. Call (844) 797-4808 for a free estimate.
If you’re in Dallas and something in your Boxabl bath is failing, get a straight answer before the damage spreads. Call (844) 797-4808 for a free project estimate and design consult – a live person answers 24/7, and we’ll tell you what fits, what it costs, and what the work is backed by.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.