A Groundwork company - serving Dallas, TX

Caesarstone Home Additions & ADU in Dallas, TX

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Caesarstone Home Additions & ADU: The Dallas Owner’s Guide

If your Caesarstone addition or ADU is showing problems, the repair or replacement is usually a surface or fabrication issue rather than a whole structure failing. In Dallas, a home addition typically runs $45,000 – $130,000, and a detached ADU runs $90,000 – $220,000; quartz-specific fixes within those builds (a cracked island top, a failed sheer-desk panel, a seam that opened along a load-bearing corner) usually fall in the $2,000 – $6,500 countertop range.

Two professional contractors installing a new white exterior entry door in Dallas, TX

Call (844) 797-4808

Owners usually find out the hard way. A hairline crack appears where a slab meets an outside corner. A prep-counter in the ADU kitchenette chips around the breakfast bar. Or a seam under the L-shape suddenly reads dark after a Dallas summer. Quartz doesn’t fail from age. It fails from poor substrate, heat stress, or a 4-inch overhang that should have had brackets and didn’t.

Which Caesarstone Models This Applies To

Caesarstone quartz is sold by collection and color rather than by a model number stamped on the part. What matters for sourcing and fitting your addition or ADU is the slab series, thickness, and finish. Standard slabs are 56.5″ × 120″ (roughly 5.5′ × 10′), stocked in 20mm (about 3/4″) and 30mm (about 1-1/4″) thicknesses. Premium collections and some designer colors run only in 20mm, and a few come in jumbo slabs at 63″ × 126″. That jumbo size matters in Dallas: it cuts a single waterfall island leg from one piece instead of forcing a seam.

Identification starts with the paperwork. The fabrication shop that cut your top leaves a color and batch name, usually a sticker under the counter or a receipt in the closing packet. Failing that, measure the thickness at the sink edge and photograph the surface in daylight (not under warm interior bulbs, which shift a pale gray toward beige). Take that photo to a local stone yard and match against current sample chips, because Caesarstone retires and renames colors more often than homeowners expect. If your color is discontinued, a current close match is usually available, but you’ll want an in-person compare before ordering.

The OEM-versus-aftermarket decision looks different for quartz than it does for a mechanical part. There is no aftermarket “Caesarstone-equivalent” slab; there are competing quartz brands. For a repair inside an addition, use Caesarstone if you can source the same color. For an ADU that’s a separate structure, a different color from another quartz line is perfectly fine and often cheaper. Cambria, Silestone, and KraftMaid are among the brands we also work with. Groundwork Construction Co. of Dallas is an independent service provider, not affiliated with Caesarstone.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Caesarstone Home Additions & ADU Is Failing

Quartz is a composite of about 90 – 95% ground quartz and 5 – 10% polymer resin. That binder is the weak point. It’s why heat, direct sun, and a poorly supported span are the usual culprits in North Texas.

  • Cracking at inside corners or seams. A structural crack usually traces back to a missing corner-radius or a substrate that flexed when someone leaned on the counter. Quartz needs a flat, dead-level support; a low cabinet corner in a humid Dallas garage conversion will eventually telegraph through.
  • Discoloration or yellowing near a window. Resin is sensitive to UV, and an ADU kitchenette or addition sunroom with west-facing glass gets hammered in Dallas summers. Once the resin yellows, polishing won’t bring it back.
  • “Popping” seams or a visible dark line. Seams open when the two slabs move independently on an unlevel base. Quartz expands and contracts with temperature swings, and a Dallas garage-adjacent wall can swing 40 degrees between winter morning and summer afternoon.
  • Thermal shock burn marks. Setting a hot pan or slow cooker directly on quartz can scorch the resin and leave a dull ring or spider crack. This one is common in ADU rental kitchens where tenants cook without a trivet.
  • Chipping along an edge or overhang. A cantilevered bar top in an addition that overhangs more than 4 inches without support will chip and eventually crack. That’s a support problem, not a stone problem, and no re-polish will fix it.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Dallas, quartz surface work inside a home addition or ADU lands in these ranges. The lead whole-project range ($45,000 – $130,000) is the build itself; the numbers below are the stone-specific pieces inside it.

Item Installed Price (Dallas)
Countertop installation (quartz, standard) $2,000 – $6,500
Kitchen island installation (quartz top) $3,000 – $10,000
Backsplash installation (quartz) $800 – $2,500
Cabinet installation (support/base for stone) $4,000 – $13,000

What drives the range: length of run, number of seams, whether the edge profile is standard eased or a mitered waterfall, and whether your color is a stock slab available locally or a discontinued color you have to hunt. Materials are a large share of a countertop quote. Labor is templating, fabrication, cutouts for sinks, and install. All work is covered by the 730-Day Done Right Promise. Upfront pricing, no surprises: the quoted number is the number you pay.

DIY or Call Us?

You can safely do a few things yourself. Measure the slab thickness at the cutouts. Check whether the counter rocks or flexes (press a palm on opposite corners). Photograph any seam or chip in daylight and note its size. What you should not do is try to cut, seam, or reset a quartz slab. Real stone fabrication requires water-fed saws, diamond tooling, and a dust-controlled shop, and quartz dust is a silica hazard. A bad DIY seam is a permanent visible defect. A licensed pro templates, cuts, and sets it in one visit, then warranties the join.

If the issue is a structural or load-bearing problem in the addition itself, don’t touch it; that’s a framing call. Our technicians have up to 12 years of experience, and every one of them is background-checked and arrives in uniform. Call Groundwork Construction Co. of Dallas at (844) 797-4808 for a free estimate. Calls are answered by a live person, 24/7.

FAQs

How long does Caesarstone quartz last in a Dallas addition or ADU? A properly supported quartz top with a substrate that doesn’t flex should last 15 – 25 years. The catch in Dallas is heat and UV: an ADU kitchenette that faces west without sun control will yellow or crack well before a shaded, climate-controlled one.

Can this be repaired instead of replaced? Often, yes. A chip, small crack, or minor discoloration can be filled or re-polished for a fraction of a replacement. A structural crack that runs through the slab, or a seam that keeps reopening on an unlevel base, usually means the piece should come out and the substrate should be corrected.

How long does the swap take? Most countertop replacements are templated one day, fabricated over the next several days, and installed in a single visit, often within the same week for stock colors. Discontinued colors take longer to source. Call (844) 797-4808 for an exact timeline on your Caesarstone.

How do you source the part? We source through local stone yards and Caesarstone’s verified distribution network, matching your color and thickness by batch whenever possible. That means verifying the color name, thickness (20mm or 30mm), and finish before we order. Call us to confirm availability for your exact shade before you commit.

Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch