Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Caesarstone Kitchen Remodeling: The Dallas Owner’s Guide
Caesarstone kitchen remodeling in Dallas typically runs $14,000 – $45,000 installed, and most countertop and cabinetry work we do goes in as a set – slabs templated, seams planned, cabinets landed, everything finished before we leave. A smaller Caesarstone refresh lands closer to $9,000 – $20,000. Homeowners in Dallas usually start this conversation the same way: a seam that’s opened up behind the sink, a slab dulled to gray after a couple of hard Texas summers, or a cabinet box that swings loose because the counter above it has quietly stopped sitting flat.

Key Takeaways
- Full kitchen remodel with Caesarstone: $14,000 – $45,000 in Dallas; countertops alone $2,000 – $6,500.
- Caesarstone is engineered quartz – about 90 – 93% ground quartz bound with resin – and it will not tolerate outdoor heat.
- The Dallas-specific failure that matters most: quartz slabs left on a west-facing sun porch or unshaded patio will yellow and warp, and no polish brings them back.
- We’re an independent Dallas provider, not affiliated with Caesarstone. We work with their material and help you match the right finish.
Which Caesarstone Models This Applies To
Caesarstone sells by finish class and series rather than model number in the way an appliance does. The two families you’ll run into across Dallas kitchens are the classic quartz surfaces (the workhorse whites, creams, and veined neutrals) and the more recent designs with larger-format veining and higher-vein content. The thickness is the number that actually governs your build: most Dallas countertops are 2 cm or 3 cm, and that thickness determines edge profile, cabinet overhang, and whether your undermount sink can be supported properly. Every slab has a color code stamped on a label, usually on the underside or on the paperwork from the original fabricator. Photograph that label and keep it – if you ever need a second slab to repair a chip or extend an island, matching by name alone goes wrong fast because the same color name gets reissued across production years with subtle shifts in the vein pattern.
On OEM versus aftermarket for Caesarstone itself: the slab is the slab. There’s no aftermarket equivalent to chase, and no third-party brand matches a Caesarstone color exactly. What you’re really choosing is the fabricator and installer. A slab cut with the wrong blade, or a seam placed in a high-traffic sightline, looks wrong regardless of what was written on the slab. When a client asks us for a Caesarstone look and the budget is tight, we price Cambria and Silestone side by side – the same quartz family, sometimes a better value on the specific finish.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Caesarstone Kitchen Remodeling Is Failing
Quartz isn’t fragile, but it fails in specific, predictable ways. Here’s what to watch for:
- Seams turning dark or opening: the epoxy seam between two slabs shrinks and lifts over a few seasons, letting cooking oil and moisture settle in. Behind the sink is where it shows up first because that’s a wet, high-traffic zone.
- Yellowing or blotchy patches: UV exposure. Quartz is an indoor material and degrades under direct sun – we see this on Dallas counters near slider doors, windows, and sunroom edges. It’s not cleanable.
- Thermal shock rings: a scorched white ring where a hot pan landed. The resin in engineered quartz breaks down above roughly 300°F, and the mark is permanent. Trivets aren’t a nicety on quartz.
- Cabinet box sway or door sag: when a cabinet frame loosens, the counter above it can settle and load-bearing seams crack. Loose cabinets and counter problems often show up together in older Dallas kitchens.
- Hairline cracks radiating from a cutout: the slab was undersized around a sink or cooktop cutout, or the cabinet below wasn’t shimmed dead flat. Quartz needs a fully supported, flat substrate – a sagging cabinet will eventually split a slab from underneath.
A quick note on why Dallas kitchens age the way they do: our wide swings between hot, humid summers and cooler fronts push expansion and contraction through cabinets and seams year after year. Kitchens with a door or window facing west take the hardest UV hit, and that’s exactly where the yellowing starts.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what a Caesarstone kitchen scope actually costs in Dallas, with the labor and tear-out baked in rather than tacked on at the end. Our pricing is upfront – the number you see is the number you pay.
| Scope | Dallas Installed Range | What’s Included |
|---|---|---|
| Countertop installation (Caesarstone) | $2,000 – $6,500 | Template, slab, fabrication, edge profile, install, caulk and seam finishing |
| Cabinet installation | $4,000 – $13,000 | Boxes, shimming, leveling to a true substrate, hardware, door alignment |
| Backsplash installation | $800 – $2,500 | Substrate prep, tile or slab up the wall, grout or sealer, outlet trim |
| Kitchen island installation | $3,000 – $10,000 | Base, support, Caesarstone top, edge and cutouts |
| Small kitchen remodel | $9,000 – $20,000 | Cabinet refresh, counter, backsplash, finish work |
| Full kitchen remodel | $14,000 – $45,000 | Cabinets, Caesarstone, backsplash, island, plumbing and electrical rough-in as scoped |
What drives the range: slab size and thickness (2 cm versus 3 cm), the number of seams and cutouts, whether an old counter and cabinet run has to come out first, and how much plumbing or electrical gets moved. Every project we do carries the 730-Day Done Right Promise – if it’s not done right, we make it right. Cabinet installation and countertop work are warrantied as part of that same covered scope. Most jobs of this size run a matter of weeks on the calendar, and we give you a written line-item quote before a single slab is ordered.
DIY or Call Us?
Some of this you can absolutely check yourself. Open cabinet doors and push against the frameless box to see if it racks. Run a straightedge across a counter seam to feel the lift. Look under the counter near the sink and cooktop cutouts for a gap or a wobble. Photograph every label you can find. That’s homeowner-level inspection and it’s worth doing.
Fabricating and installing a Caesarstone slab is not. Slabs weigh in the range of a loaded piece of furniture, they chip if carried wrong, and a bad seam or a cutout that’s off by a quarter inch means an expensive re-cut. Tear-out of a glued-down slab near live plumbing and electrical, moving a cabinet run, and handling a wet saw with a diamond blade – that’s the part to hand off. Our technicians are background-checked and arrive in uniform, and they’ve got up to 12 years of experience in kitchens like yours.
If you’ve been burned before by a crew that vanished mid-job or a bid that grew as it went, that’s the exact pattern we’re built against. Call (844) 797-4808 and get a free project estimate and design consult. Calls are answered by a live person, 24/7 – no voicemail, no waiting until Monday.
FAQs
A properly installed Caesarstone countertop is a 15-to-20-year surface under normal indoor use. The catch is heat and UV: a hot pan over roughly 300°F can scorch the resin permanently, and a slab exposed to direct Texas sun will yellow and can’t be restored. Kept indoors, out of direct sun, and on a flat substrate, quartz holds up well. Call (844) 797-4808 for an exact quote on your Dallas kitchen – estimates are free.
Sometimes. Small chips can be filled with color-matched epoxy, opened seams can be re-epoxied and burnished, and cabinet-level corrections can fix a counter that’s just sitting uneven. Yellowing and thermal burns can’t be repaired. If you’re looking at more than a couple of chips and a seam, replacing the run is usually the better money. Call (844) 797-4808 and we’ll tell you honestly which side of that line you’re on.
A straight countertop-only swap is typically a few days of real work in the kitchen, with fabrication time on the front end. A full Caesarstone kitchen remodel in Dallas runs several weeks on the calendar – the slab order, the cabinet run, the backsplash, and the punch list all take time. We schedule the phases so you’re not without a working kitchen for longer than necessary. Call (844) 797-4808 for a realistic timeline on your project.
We work with supplier partners who stock Caesarstone, and we confirm the color code and slab thickness against the label and sample before ordering. Because Caesarstone reissues colors over production years with subtle pattern shifts, we verify before we buy rather than assume. You see the slab source and the line-item pricing before work starts. Call (844) 797-4808 to schedule a free estimate.
Groundwork Construction Co. of Dallas has been in business since 2014 and handles seven core service lines – kitchens, bathrooms, roofing, windows and doors, fencing, driveways and pavers, and additions and ADU – so the Caesarstone kitchen is one partner, foundation to finish line. We also service KraftMaid cabinets, Cambria, and Silestone if you want to compare finishes.
Ready for a number you can actually plan around? Our upfront pricing includes 0% financing for 18 months and $1,000 off projects over $10,000. Call (844) 797-4808 for your free estimate, and we’ll walk your Dallas kitchen with you – start to finish.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.