Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Driveway & Pavers: The Dallas Owner’s Guide
We install Cambridge Pavers driveways and hardscape systems across Dallas, and a full paver driveway typically runs $7,000 to $18,000 installed, depending on square footage, base prep, and the specific Cambridge line you choose. Cambridge products are sold through authorized dealers rather than kept on a shelf, so what we call a “part” is usually a specific paver unit, border piece, or setting material matched to your existing run. Dallas owners usually find out something is wrong the same way: a paver heaves after a heavy rain, a border course shifts out of line, or a hairline crack opens across a driveway apron that looked fine last summer.

We’re an independent installer and are not affiliated with Cambridge Pavers. We match the right unit to your existing course and put it down over a base built for North Texas soil.
Key Takeaways
- Cambridge pavers fail in Dallas mostly from base movement, not from the paver itself.
- Installed paver driveway pricing here runs $7,000 to $18,000.
- Matching the exact Cambridge series matters; color and thickness vary by line.
- Most repair and replacement work is quoted upfront with no change orders.
Which Cambridge Pavers Models This Applies To
Cambridge manufactures several distinct paver families, and they are not interchangeable. The lines Dallas homeowners most often have underfoot include the traditional Leaders and Romans profiles, the larger-format Ledgestone and Maytrx slabs, and thinner veneer products used on step faces and walls. Each line has its own nominal thickness, face dimensions, and color series, and a replacement unit from the wrong family will sit proud, rock underfoot, or read as a visible patch once the sun hits it.
The fastest way to identify what you have is to lift one loose unit from a corner or border and measure it. Record the length, width, and thickness to the nearest sixteenth of an inch, then note the face texture and the color name if you can find it on the original paperwork or a dealer sample. Cambridge color names are series-specific, so “Sierra” or “Charcoal” from one line won’t match the same word from another. If you’re comparing an OEM Cambridge unit against an aftermarket concrete paver, understand the trade-off up front: aftermarket units are easier to source fast, but they rarely match Cambridge texture and dimension closely enough to disappear into an existing field. On a visible driveway in Dallas, an exact-match Cambridge unit is usually the right call.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambridge Pavers Driveway & Pavers Is Failing
Pavers are durable, but the system under them is what fails first, especially on the expansive clay soils common across Dallas. Here’s what we see most:
- Heaving or rocking units after rain. Water is getting under the field and the base has lost compaction. In Dallas, this is almost always a drainage or edge-restraint problem, not a defective paver.
- Border and edge courses shifting outward. The edge restraint has failed or was undersized. Once the perimeter lets go, the field spreads and joints open.
- Sand washing out of the joints. Joint sand is migrating, usually because the joints were underfilled or the surface isn’t draining where it should. Left alone, loose units follow.
- Hairline cracks across a paver or apron. Point-loading from a vehicle or a base void beneath the unit. A cracked paver over a bad base will crack again after replacement.
- Sunken low spots near the garage apron or street. Settlement from poor subgrade prep or water pooling against the slab. This is the one that quietly gets worse every wet season.
If you’re seeing more than one of these at once, the repair is rarely a single paver. Call (844) 797-4808 and we’ll look at the whole system.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Repair and replacement pricing in Dallas depends on how much of the base has to come up and how exact the Cambridge match needs to be. A straight unit swap is far cheaper than rebuilding a failed section of base and edge restraint. Here’s how our numbers land:
- Single paver or small unit replacement: typically $150 to $450, including matching the Cambridge series and re-sanding the joint.
- Section repair with base correction (roughly 50 to 150 sq ft): $600 to $2,200, including removal, re-compaction, edge restraint, and re-laying the field.
- Full paver driveway replacement or new install: $7,000 to $18,000, installed.
- Sealing after repair: $250 to $700, worth doing once the joints are refilled and cured.
Every quote is line-item and upfront: the number you see is the number you pay, with no change orders hiding in the middle. The work carries our 730-Day Done Right Promise. If it’s not done right, we make it right.

DIY or Call Us?
There’s real value in what you can check safely yourself. Walk the driveway after a rain and note where water pools. Lift a loose corner unit and measure it so we can match the Cambridge series. Photograph the failing section and the edge restraint. That saves time and gets you an accurate quote faster.
Where DIY goes wrong is the base. Pulling a paver to swap it seems simple until you find the bedding layer was never compacted, or the edge restraint was held with the wrong fasteners, or the subgrade is Dallas clay that swells every spring. Drop a new unit onto a bad base and it will rock or crack within a season, and you’ve spent the money twice. A proper repair re-establishes compaction and drainage before anything goes back down, and that’s the part most homeowners can’t check by eye. Call (844) 797-4808 and we’ll tell you honestly whether you’re looking at a $200 fix or a section rebuild.
FAQs
Cambridge pavers themselves commonly last 25 years or more, but that lifespan depends on the base and drainage beneath them. In Dallas, the failure point is almost always clay soil movement and water management, not the paver unit. A well-built base with proper edge restraint and drainage is what gets you the full life out of the product.
Yes, most isolated failures can be repaired rather than replaced. If the damage is one unit, a border course, or a contained low spot, we lift the section, correct the base and restraint, and re-lay the existing pavers. Full replacement only makes sense when settlement or drainage failure runs across most of the driveway.
A single unit swap or small section repair is usually a half-day to one day. A larger section rebuild runs one to three days, and a full driveway replacement typically takes three to seven days depending on square footage and base work. We confirm timing on the written quote before any work starts.
We match your existing paver by series, dimensions, texture, and color, sourced through Cambridge’s authorized dealer network rather than guessed from a photo. That’s why the measurements and photos you can collect beforehand matter so much. We confirm the match before ordering and pull the correct unit for your run.
We also handle KraftMaid, Cambria, and Silestone on the interior side when a Dallas project grows to include the kitchen.
If your Cambridge driveway is heaving, shifting, or washing out, the sooner we look at it the smaller the repair usually is. Call (844) 797-4808 to schedule your free estimate. Live person answers around the clock, upfront pricing on every quote, and background-checked, uniformed technicians on the job.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.