A Groundwork company - serving Dallas, TX
C

CWS Bathroom Remodeling in Dallas, TX

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CWS Bathroom Remodeling: The Dallas Owner’s Guide

Replacing CWS bathroom fixtures and finishes in Dallas typically runs $9,000 – $28,000 installed, depending on how much of the room we touch and which CWS series your home was fitted with. We schedule these projects after an on-site measurement, and most single-fixture swaps are completed in one to two visits. Owners usually find out something is wrong the same way: a slow drain under the CWS vanity, a shower pan that flexes when they step in, grout that goes dark in a week, or a faucet that drips after the handle is fully closed. Groundwork Construction Co. of Dallas is an independent service provider, not affiliated with CWS, so we match parts to your actual model rather than whatever a warehouse happens to stock.

Two professional contractors installing custom kitchen wall cabinets in Dallas, TX

Call (844) 797-4808

  • Installed range: $9,000 – $28,000 for full CWS bathroom remodeling in Dallas; smaller single-fixture work lands at the low end.
  • Common culprit: a failed wax ring, supply line, or cartridge, not the fixture itself.
  • Warranty: every job carries our 730-Day Done Right Promise.

Which CWS Models This Applies To

CWS parts are not universal. The company ships fixtures across several product lines, and the same-looking vanity or shower valve can carry a different rough-in measurement, cartridge body, or drain assembly depending on the series it came from. Before we quote anything, we identify the model from the label on the back of the vanity, the underside of the sink basin, or the trim plate on the valve, then cross-check it against the CWS parts documentation for that series. Guessing by appearance is how homeowners end up with a $180 cartridge that doesn’t fit and a weekend wasted.

Once we have the model number, you get a straight choice between the OEM part and a quality aftermarket equivalent. For wear items like cartridges, supply lines, and wax rings, aftermarket is often fine and saves money. For anything structural, like a shower pan liner or a vanity cabinet panel, we recommend the OEM match so the finish and dimensions line up with what’s already in the room. We don’t stock parts and we don’t carry them on a truck, so every part is sourced specific to your model and confirmed before we schedule installation. If your bathroom also includes KraftMaid cabinetry, Cambria or Silestone surfaces, note those brands too; they need their own model identification.

How to identify your model

  • Check inside the vanity door for a manufacturer sticker.
  • Look under the sink rim or on the back of the faucet body.
  • Photograph any label you find, even if you can’t read it all, and send it to us.
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CWS Bathroom Remodeling Is Failing

Most calls we get in Dallas start with one of these five symptoms. Each one points to a specific part:

  • A drip that won’t stop when the handle is closed. This is almost always a worn cartridge or seat. The water finds its way past the seal, and the fix is the cartridge, not the whole faucet.
  • Flex or softness in the shower floor. A shower pan that gives underfoot usually means the liner underneath has failed or was never set correctly. It gets worse with the clay-heavy soil movement we see across Dallas subdivisions, where a settling slab can stress the pan joints.
  • Dark grout lines that come back after cleaning. Persistent grout discoloration in a Dallas bathroom usually points to moisture behind the tile, often from a failed pan or a leaking supply line, not a cleaning problem.
  • Water staining or soft wood under the vanity. A failed wax ring or a loose supply connection leaks slowly. The stain on the cabinet floor is the first visible sign; the damage underneath is usually worse.
  • Loose or rocking toilet base. A rocking toilet in Dallas homes typically means the flange has cracked or the subfloor has softened from a slow leak. Ignoring it lets water reach the framing.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Dallas homes, CWS-compatible bathroom remodeling runs $9,000 – $28,000. Smaller bathrooms land closer to $5,000 – $12,000. Here’s how the line items break down:

Work Installed Range
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement $3,000 – $8,500
Bathroom vanity installation $800 – $3,000

What moves the number: the number of fixtures being replaced, whether tile work is involved, whether the subfloor or framing needs repair, and how accessible the plumbing is. We quote labour and materials as one upfront number, so you’re not handed a parts bill later. Every job is covered by our 730-Day Done Right Promise, and we offer $1,000 off projects over $10,000 plus 0% financing for 18 months.

DIY or Call Us?

Some things are safe to check yourself. You can look for the model label on your vanity, trace a slow drip to the supply line or the cartridge, and clean and re-seal grout on a sound, stable pan. Plenty of Dallas homeowners find the leak themselves and save the diagnostic visit.

Two professional contractors installing custom kitchen wall cabinets in Dallas, TX

Others need to stop there, honestly. Anything involving the shower pan liner, the toilet flange, or a supply connection inside the wall means opening water supply and waste lines. Get it wrong and you’re looking at water damage to framing and flooring, which is money no homeowner wants to spend twice. If you’re unsure whether the floor is soft or just cold, don’t guess; have it inspected. Our team is background-checked and uniformed, and we’ll tell you plainly whether you need a repair or a replacement.

Call (844) 797-4808 and we’ll schedule a free estimate. Lines are answered by a live person, 24/7.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch