A Groundwork company - serving Dallas, TX
C

CWS Fence Installation in Dallas, TX

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CWS Fence Installation in Dallas: The Dallas Owner’s Guide

We install CWS-compatible fencing across Dallas, and most full replacements run $3,500 – $9,000 installed for a standard residential run, with materials matched to your existing CWS system. A typical fence install takes one to three days once materials are on site. Most Dallas owners discover a problem the same way: a gate that drags, a post that leans after a storm, or panels that no longer line up where they meet the house.

Two construction workers installing wooden roof trusses for a home addition in Dallas, TX

Call (844) 797-4808

Key Takeaways

  • CWS parts are model-specific, so the panel or gate hardware you order has to match your exact series.
  • North Texas heat and clay soil are the two biggest reasons CWS fences fail here, not the fence itself.
  • Installed pricing in Dallas runs $3,500 – $9,000 for a full replacement, backed by our 730-Day Done Right Promise.

Which CWS Models This Applies To

CWS builds fencing in several product families, and the hardware, post spacing, and panel config differ across them. Before you order anything, find the model tag. On most CWS runs it’s on the inside face of the gate stile or the first post cap near the gate. If the tag is gone, measure the panel height to the nearest inch and the post spacing center-to-center; those two numbers usually narrow it to one family.

OEM CWS parts are the safe match. Aftermarket equivalents exist for common items like gate hinges, latches, and post caps, and a quality aftermarket part can work fine, but you have to check the screw-hole pattern and load rating against your series or it won’t seat correctly. We source CWS-compatible components for every install and won’t swap in a part that doesn’t fit your fence line. If you’ve worked with KraftMaid, Cambria, or Silestone in other parts of your home, you already know how much model matching matters. It’s the same principle here.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CWS Fence Installation Is Failing

  • Gate dragging on the ground. The hinge or post has shifted. In Dallas, clay soil expands and contracts with our wet-dry cycles, which pulls gate posts out of plumb faster than most homeowners expect.
  • Leaning posts after a storm. Post footings that weren’t set deep enough or weren’t anchored in our soil give way under wind load. A single leaning post often means the footing failed, not the post.
  • Panels pulling apart at the seams. Fasteners back out from thermal movement. DFW summers push fence temperatures well past 130°F, and that repeated expansion loosens hardware over a few seasons.
  • Split or warped boards. UV and heat dry out wood and degrade some composite materials faster in North Texas than in milder climates. Warping usually shows up on the south and west faces first.
  • Rust or corrosion at hardware. Cheap fasteners corrode in our humidity, and once a hinge or bracket rusts, it stops holding the gate square.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In Dallas, CWS-compatible fence installation runs $3,500 – $9,000 installed. That covers removal of the old run, posts and footings set for our soil, panels, gate hardware, and cleanup. The range moves on fence length, material choice, terrain, and whether we’re resetting footings or working around existing landscaping.

We quote a written line-item price up front, so the number you see is the number you pay. There are no surprise add-ons once the crew is on site. Every install carries the 730-Day Done Right Promise: if something we set isn’t right, we come back and make it right. Calls are answered by a live person 24/7, and our technicians are background-checked and arrive in uniform.

DIY or Call Us?

You can safely check a few things yourself: wiggle each post by hand, look at the gate hinges for rust, and check whether the fasteners are backed out. Replacing a single hinge or latch is a reasonable DIY job if you match the part to your CWS series.

Two construction workers installing wooden roof trusses for a home addition in Dallas, TX

Where DIY goes wrong is the structural side. Resetting a post in North Texas clay without the right footing depth and anchoring is the mistake we fix most often. The fence leans again within a season, and you’ve spent a weekend for nothing. If a post is loose or a footer has failed, that’s the point to call us at (844) 797-4808. We’ll tell you honestly whether it’s a quick fix or a full replacement.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch