Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Windows & Doors: The Dallas Owner’s Guide
We install, service, and replace CWS windows and doors across Dallas, and a full window replacement typically runs $4,500 – $15,000 here, while impact window installation runs $8,000 – $25,000. Most Dallas homeowners find us the day a window won’t latch, a door drags the frame, or a fogged glass unit shows up after a storm. One call to (844) 797-4808 gets a live person day or night, and we quote the work in writing before anyone touches a sill.

What usually starts it: a hairline crack in the seal, a hinge that’s been bent since the last move, or a lock that stopped lining up in July heat. The symptom is small. The fix is a part matched exactly to your CWS model, or it’s a fresh install done right.
- Impact windows installed: $8,000 – $25,000
- Standard window replacement: $4,500 – $15,000
- Bathroom and kitchen window swaps: quoted per opening, written line-item
- Estimate: free, and a live person answers when you call
Which CWS Models This Applies To
CWS builds across several window and door lines, from vinyl single-hung and slider windows to hinged patio doors and fixed picture units. The exact series matters because a CWS vinyl sash from one line won’t seat in the frame of another, and the hardware kit (balance, lock, hinge, roller) is line-specific. We ask for the model plate before we source a single part. It’s usually on the sash edge, inside the track, or stamped on the door stile behind the handle.
If the label is gone, we measure. CWS frame depths and sash profiles vary enough that a tape measure and a photo of the corner weld tell us what we need. The OEM-versus-aftermarket decision comes down to this: for balances and locks, an OEM CWS part removes the guesswork on fit and finish, and for glass units and weatherstripping, a quality aftermarket equivalent often performs identically for less. We’ll tell you which side of that line your part falls on rather than defaulting to the pricier option.
One compatibility gotcha Dallas owners hit: CWS impact-rated units and standard units can share a frame opening but use different glazing thickness and different anchor patterns. A standard replacement sash won’t hold an impact rating just because it fits the hole. We verify the rating label, not just the measurement.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Windows & Doors Is Failing
Dallas gets the temperature swing that stresses window components hard: 100°F-plus summers and occasional hard freezes, plus spring hail. That cycle works seals, balances, and door hardware in ways mild climates don’t. Here’s what fails first and why.
- Fog or condensation between panes. The sealed glass unit lost its desiccant seal. Once moisture is inside, the unit can’t be dried out; that glass has to be replaced.
- A sash that won’t stay up. The spiral or block-and-tackle balance is worn. It’s a line-specific part, and the wrong balance lets the sash drop on fingers.
- A door that drags or sticks. A hinge has bent or the frame has shifted with seasonal movement. Dragging wears the weatherstrip and lets water in.
- A lock or latch that won’t catch. The keeper has drifted out of alignment or the lock mechanism has failed. A window that won’t latch is a security gap, not just a nuisance.
- Drafts and visible daylight at the frame. Weatherstripping has flattened or pulled loose. It’s cheap to replace and stops the energy loss at the source.
Replacement Cost & What’s Included
For Dallas, window replacement runs $4,500 – $15,000 and impact window installation runs $8,000 – $25,000. The ranges move with how many openings, whether we’re swapping a single sash or the whole unit, impact rating, and whether the frame is sound or needs repair behind the trim. A sealed glass unit replacement sits at the low end because it’s just the glass and labor. A full door replacement sits higher because it’s a bigger opening and a heavier unit.
We price parts and labor separately so you can see what the part costs and what the install costs. That’s our no-hassle upfront pricing: the number you see is the number you pay, no change orders mid-job. The whole thing is covered by the 730-Day Done Right Promise, so if a balance fails or a seal goes six months after we leave, we come back and make it right. Call (844) 797-4808 for an exact written quote, and ask about $1,000 off projects over $10,000 plus 0% financing for 18 months.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this you can safely check yourself. Tightening a loose hinge screw, cleaning and re-seating weatherstrip, cleaning a track, or confirming your model plate are all fair game and take a few minutes.
Where it goes wrong: replacing a sash balance. Those springs under tension can snap and strike a hand or face when they release, and seating a new balance in a CWS track without the correct tool damages the frame. A failed glass seal is not a DIY job either. And a door that needs re-hanging so it latches and seals right takes a pro; skip the frame work and you’ll chase the drag until you replace the frame. We’ve got background-checked, uniformed technicians, and our technicians have up to 12 years of experience on windows and doors. When a part needs tension, a seal, or a hung door, call (844) 797-4808.
FAQs
Expect 15 – 25 years for the window unit itself, with glass seals and balances failing sooner. In Dallas heat, that hard temperature swing typically takes a toll on sealed glass units and weatherstripping around the 10 – 15 year mark. Call (844) 797-4808 for an assessment on your specific openings.
Often, yes. A failed balance, lock, hinge, or weatherstrip is a repair, not a replacement, and the glass unit can be swapped without pulling the whole window. The one case that forces replacement is a rotted frame or a failed seal on a unit that’s already past its service life. We’ll tell you which situation you’re in before you spend a dollar.
A single glass unit or balance swap is usually a short visit, often completed the same day once the correct part is in hand. A full window or door replacement takes longer because we pull the unit, set the new one, and seal and flash it properly. We schedule around your day and finish the job clean.
We source by model plate, or by measurement and photo when the label is gone. The part is matched to your CWS line so the fit and the rating are correct, and we confirm the impact label on impact-rated units. We don’t stock parts on a truck, so source time depends on the part; call (844) 797-4808 and a live person will give you a real timeline.
Get Your CWS Windows and Doors Handled in Dallas
We’re an independent service provider, not affiliated with CWS, and we work on windows and doors across Dallas with the same standards we bring to every job. Our brand partners include Andersen and Pella for windows, and for kitchens we’re proud to work with KraftMaid, Cambria, and Silestone. Every project is backed by the 730-Day Done Right Promise, upfront pricing with no surprises, and a live person on the phone 24/7. Call (844) 797-4808 to schedule your free estimate and get your windows and doors back to working the way they should.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.