Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Duncanville, TX
We provide independent CWS construction service across Duncanville, from cabinet installation and refacing to countertops and full kitchen remodeling. The one thing that sets our CWS work here apart: almost every job is a tear-out and re-tie-in inside a 1950s – 1970s brick ranch, so we check the slab and the plumbing before a single cabinet box goes in. We’re not authorized, sponsored, or endorsed by CWS. We’re simply a Dallas-area firm that works on their cabinetry and millwork every week. Call (844) 797-4808 to schedule a free estimate.

Why Duncanville Residents Choose Us for CWS Service
Homeowners in Duncanville call us because the cabinet work in these houses is rarely simple. The boxes are original to the build, the door styles and finishes have a specific look, and pulling a straight replacement out of a catalog tends to miss. We read what’s actually installed – the box construction, the overlay, the wood species, the sheen – so a replacement door or a new run of base cabinets matches the room instead of approximating it.
Our technicians have up to 12 years of experience reading CWS cabinet boxes, door styles, and finishes, and we source OEM-compatible hinges, glides, and door fronts for the models still supported. When a part is discontinued, we say so and offer a quality aftermarket match rather than pretending an original is available. Live person, 24/7 on the phone. Upfront pricing, no surprises. And a 730-Day Done Right Promise behind the workmanship: if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CWS Construction Problems We Solve in Duncanville
- Peeling thermofoil and lifting laminate skins. The long humid summers Duncanville runs, combined with heat that builds in kitchens sitting under a low attic, break down the adhesive at door edges. Once the skin lifts, moisture gets behind it and the peeling spreads across the face.
- Swollen bases under the sink and at toe kicks. Aging post-war supply lines and ice-maker feeds drip slowly for months before anyone notices, and particleboard and MDF soak it up. By the time the cabinet shows damage, the box has usually lost its structural integrity at the bottom.
- Racked face frames and loose hinges. Slab foundations across Duncanville move with the black clay underneath, and cabinet runs that were square when installed rack out of alignment over time. Doors stop closing flush and hinge screws strip out of their holes.
- Worn glides and yellowed finish on 1970s – 80s originals. Original CWS Charleston-style raised-panel oak cabinets are still common in the 1980s – 90s subdivision pockets. The boxes are often sound, but the drawer glides are shot and the clear finish has ambered to a tone nobody picked.
- Countertops templated over a moving run. New quartz or granite set on a cabinet run that hasn’t been checked for level and plumb will crack at the seams or lift at the wall within a couple of seasons. We verify the run before a template is ever taken.
CWS Service in Duncanville: What Local Conditions Mean for Your Equipment
Duncanville is essentially built out, and that single fact changes everything about CWS work here. Nearly every cabinet project is a tear-out inside a 1950s – 1970s brick ranch on slab – not new construction. You feel it in the details: cast-iron and early PVC drains that don’t tolerate a careless demo, original electrical panels that have to be brought up to current permitting before a new appliance circuit goes in, and cabinet runs that were set on a slab now moving over expansive black clay. Compare that to the greenfield new-build corridor out in Midlothian or Waxahachie, where crews set cabinets in fresh square rooms on fresh slabs. In Duncanville, we price slab checking and foundation review before cabinets go in, because a run installed on a moving floor will rack and fail no matter how good the door is. If a pier or a crack repair is needed, it happens first, not after the countertops are set.
CWS Models & Products We Service in Duncanville
We work on the CWS cabinet lines that actually turn up in Duncanville homes: Charleston-style raised-panel oak cabinets from the 1980s – 90s subdivision builds; white thermofoil and finished-plywood shaker and slab door cabinets from mid-range remodel packages; ready-to-assemble and semi-custom base and wall lines sold through building-material dealers; and the vanity and linen units installed during bath updates in 75116 and 75137 homes. Parts are sourced per job, not pulled from local stock. Where a box is square and dry, we fit CWS-compatible OEM hinges, glides, and door fronts. Where OEM parts are discontinued, we spec quality Blum-style aftermarket hardware and tell you plainly that it’s a match, not an original.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Duncanville
These are the ranges we work from in the Dallas market. Your actual number depends on cabinet condition, how much foundation or plumbing correction is needed first, and the countertop material you choose.
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Full Kitchen Remodel | $14,000 – $45,000 |
A free estimate includes measuring the existing run, checking level and plumb, inspecting the boxes for swelling or racking, and a written line-item quote. We also offer $1,000 off projects over $10,000 and 0% financing for 18 months. Call (844) 797-4808 for an exact quote.
Serving Duncanville, TX – Our Local Coverage Area
We serve Duncanville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Duncanville
Yes, in most cases they can – if the boxes are square and dry. Refacing makes sense when the carcass is solid but the doors, glides, and finish are worn. We inspect the boxes first and tell you honestly which side of the line your kitchen falls on. Call (844) 797-4808 for a free assessment.
The heat and humidity break down the adhesive that bonds thermofoil and laminate skins to the door core. Duncanville kitchens under a low attic run hotter than the rest of the house, so edges lift first and the peeling spreads. Once a skin lifts, moisture gets behind it and the door usually needs replacing rather than re-gluing.
Yes. Cabinets and countertops set on a moving slab will rack and crack, so foundation correction comes first. The black clay under Duncanville heaves and shrinks with wet-dry cycles, and a run installed over an unresolved slab problem usually fails within a couple of seasons. Call (844) 797-4808 and we’ll walk the floor with you.
Quartz is the most common pairing – it reads clean against both ambered oak and painted shaker doors, and it holds up to the heat. Granite works well where you want movement and warmth. Either way, we template only after the cabinet run is verified level.
Yes. Since Duncanville is built out, you can’t add square footage easily, so improving the kitchen you have adds real value to a 1950s – 1970s ranch that already has good bones. A small kitchen remodel typically runs $9,000 – $20,000. Call (844) 797-4808 for an exact quote – estimates are free.
Service Areas Near Duncanville
We handle CWS cabinet and kitchen work in Duncanville and the surrounding southwest Dallas County communities, including DeSoto, Glenn Heights, and neighborhoods across Dallas. See our full Duncanville service area page for coverage details, and browse our CWS service expertise for the full picture of the cabinet lines and kitchen work we take on.
Book Your CWS Service in Duncanville Today
Whether it’s a set of peeling thermofoil doors, a swollen sink base, or a full kitchen remodel in a Duncanville ranch, we’ll check the slab, give you a written line-item quote, and back the workmanship with the 730-Day Done Right Promise. Call (844) 797-4808 to schedule your free estimate and design consult – a live person answers around the clock.
Written by the team at Groundwork Construction Co. of Dallas.