Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Bathroom Remodeling: The Dallas Owner’s Guide
We install ES Windows-compatible bathroom remodeling for Dallas homes, and the typical installed range runs $9,000 – $28,000 depending on scope, fixtures, and how much of the original room we have to rebuild behind the walls. This is planned work, not emergency work, so we schedule it properly instead of rushing it. Most Dallas owners land on this page when their ES Windows shower enclosure, framed window, or tub surround starts leaking around the edges, fogging between the panes, or letting water track down the tile line after years of North Texas heat cycling against it.

That failure is normal. Dallas summers push bathroom humidity higher than the rest of the country, and the daily expand-contract cycle works on seals, framing, and glass gaskets until something gives. ES Windows made solid products, and our job on this page is to help you match the right replacement to your specific model, price it honestly, and get it installed without a crew that vanishes.
Which ES Windows Models This Applies To
ES Windows (a regional manufacturer with strong Texas distribution) built residential lines under several series names over the years, and the model matters because frame profiles, sill depths, and hardware mounting points changed between them. Pull the manufacturer’s label off the inside of the frame, usually tucked into the jamb or the head, and photograph the full sticker. The series code, the glass package (Low-E and argon are common on Texas builds), and the rough opening size are what a parts match actually depends on.
Here is the compatibility gotcha most Dallas homeowners miss: ES Windows used more than one sill-deep frame across its run, so a generic bathroom window that measures the same width and height can still sit proud of the tile and break the water plane. On shower surrounds, that difference shows up two or three years later as a leak at the bottom.
On the OEM-vs-aftermarket call, our answer is straightforward. ES original glass assemblies and enclosures are the cleanest fit when your model is still supported. When it isn’t, a quality aftermarket equivalent rated for wet-area use is the right move, and it will outlast a cheap knockoff by a wide margin. We source to the model, not to whatever happens to be on a shelf. We do not claim to stock ES parts, and we’re not affiliated with ES Windows. We’re an independent Dallas service provider, and we also work with KraftMaid, Cambria, and Silestone on the vanity and finish side.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Bathroom Remodeling Is Failing
Owners usually spot the first sign, not the cause. Here’s how we separate the two.
- Fogging or condensation between the panes. The seal on the insulated glass unit has failed, which lets moisture in and kills the gas fill. It won’t get better on its own.
- Water staining at the sill or along the bottom edge. The water plane has broken down, often because a prior replacement used the wrong sill depth. Dallas thunderstorms expose this fast, since wind-driven rain finds the gap.
- Sticking or spongy framing around the unit. Years of humidity have swollen or softened the surrounding material. Left alone, it spreads into drywall and trim.
- Cracked gaskets or loose hinges on the enclosure. The seal at the door has aged out and no longer keeps water inside the shower.
- Mildew that keeps returning after cleaning. Moisture is trapped behind the surround or trim, not just sitting on the surface. That’s a removal-and-rebuild sign.
If you see more than two of these, the repair is usually bigger than a part swap. Call us and we’ll tell you honestly which it is.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Full bathroom remodeling for a Dallas ES Windows home typically lands in the $9,000 – $28,000 range. Smaller rooms, such as a half bath or a tight guest bath, run $5,000 – $12,000. More targeted parts of the job carry their own installed ranges: a walk-in shower runs $4,500 – $12,000, a tub-to-shower conversion runs $3,500 – $10,000, a shower replacement runs $3,000 – $8,500, and a vanity install runs $800 – $3,000.
What moves you up or down the range: the glass package, tile area, whether the framing behind the walls is sound, and whether the shower rough-in has to be moved. We quote parts and labor as separate line items so you can see exactly what the ES-compatible unit costs versus the install. Every job is covered by our 730-Day Done Right Promise, which is one of the longest workmanship guarantees in the residential space. The number you see is the number you pay, and we offer 0% financing for 18 months plus $1,000 off projects over $10,000.
DIY or Call Us?
Some checks are safe to do yourself. You can photograph the model label, measure the rough opening, and note where the water stains are. That information helps us match your ES Windows unit before we arrive.
What we’d steer you away from doing yourself: pulling tile to inspect framing, resealing an enclosure you can’t get watertight, and any repair that involves cutting into the wall cavity. Dallas bathroom moisture problems hide behind the drywall, and a surface patch over wet framing just moves the mildew. A half-done DIY fix here usually adds cost to the real repair later. If your ES unit is leaking, fogged, or sitting in compromised framing, don’t guess. Call (844) 797-4808 and we’ll schedule a free estimate, with a live person answering any time, day or night.
FAQs
Most ES Windows shower enclosures and framed bathroom windows last about 12 to 20 years in Dallas conditions, with the low end more likely on units facing west or south into full afternoon sun. The seal and gaskets usually go first, and once the glass fogs or the gasket cracks, you’re on borrowed time. If yours is past that window or already showing symptoms, call (844) 797-4808 for a free estimate.
Often yes. A failed gasket, a sticking hinge, or a single glass unit can be repaired without a full replacement, and we’ll tell you when repair is the smarter spend. But if the frame or surrounding wall is wet and soft, patching just delays the inevitable. Call (844) 797-4808 and we’ll walk you through which side you’re on.
A straightforward ES-compatible shower or window swap is commonly finished in one to three days, while a full bathroom remodel runs two to four weeks depending on tile, fixtures, and framing. We give you a firm schedule up front, not a moving target. Call (844) 797-4808 for an exact timeline on your room.
We match to your model label and rough opening, and we pull the OEM assembly when your series is still supported or a rated aftermarket equivalent when it isn’t. We don’t stock ES parts and won’t claim to. What we do is get the correct part to your Dallas home and install it right the first time. Call (844) 797-4808 and we’ll start the match.
Groundwork Construction Co. of Dallas is the full-scope partner for homeowners who refuse to gamble on a major remodel. From first call to final walkthrough, you get upfront pricing, background-checked technicians, and the 730-Day Done Right Promise backing every job. Call (844) 797-4808 to schedule your free estimate and design consult.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.