Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Fence Installation: The Dallas Owner’s Guide
ES Windows fence installation in Dallas runs $3,500 – $9,000 installed, and most jobs are scheduled within a week of your free estimate. Fence work tied to an ES Windows product is rarely an emergency, so we plan it like a build, not a rescue. Homeowners usually find the problem slowly: a gate that drags by an inch each month, a fence line that tilts after a storm, or panels pulling loose at the posts. By the time it’s obvious, the post footings have usually been moving for a season or two.

Which ES Windows Models This Applies To
ES Windows makes windows, doors, and outdoor products, and the fence-related pieces we see in Dallas fall into a few clear groups: outdoor gate and fence hardware supplied with ES Windows patio and entry door packages, screen and storm door fencing accessories, and decorative fencing components sold through the same dealer channel. The part is almost never the fence itself; it’s the arm, hinge, latch, or mounting component that ties your ES Windows product to the fence line.
To match the right piece, find the model sticker on the frame or door jamb (usually an etched or printed label with a series code and dimensions). Measure the hinge spacing and the gate stile width to the nearest 1/16 inch. Then call us with those numbers.
The OEM-versus-aftermarket call is the one that trips people up. For ES Windows-specific hardware, OEM parts typically fit exactly and preserve any factory warranty on the door or window, but they cost more and arrive slower. Quality aftermarket equivalents work fine for standard hinge and latch geometry, but the fit tolerance is narrower on older ES Windows series. If we go aftermarket, we measure and test-fit before committing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Fence Installation Is Failing
Here’s what Dallas homeowners actually tell us on the phone, and what’s usually going on underneath:
- Gate sagging and scraping the ground. The lower hinge has worn or the post footing has settled in our expansive clay soil. Both show up first on the latch side.
- Latch not catching or popping open in wind. The striker plate has shifted, or an ES Windows-specific latch has lost spring tension. Latch geometry loosens with every season of thermal expansion.
- Panels racking out of square. Post movement, not panel failure. Once a post tilts a few degrees, the whole run behind it follows.
- Rust streaks or pitted hardware. Our summer humidity and spring storms eat through cheap finishes fast. Pitting at hinge pivots is the leading cause of gate binding.
- Hardware pulling out of the frame. Fastener holes elongate when a component has been loose for months. Catch this early and it’s a re-secure; wait and it’s a rebuild.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Most ES Windows fence installation replacements in Dallas land between $3,500 and $9,000 installed. Here’s what drives the number:
- Linear footage and gate count. A single gate refresh sits near the bottom; a full perimeter rebuild with two gates pushes toward $9,000.
- Material. Vinyl runs $3,500 – $9,000; aluminum runs $4,000 – $10,000 for the same layout.
- Parts mix. OEM vs aftermarket, and how many components get replaced versus reused.
- Site conditions. Post replacement in rocky ground or tight lots adds labor.
You get a written line-item quote before we start: parts, labor, disposal, permits if any apply. No-hassle upfront pricing means the number you see is the number you pay. Every job carries our 730-Day Done Right Promise, and financing is available at 0% for 18 months.
DIY or Call Us?
Some things you can handle. Some you shouldn’t touch.
Safe for a homeowner: tightening loose fasteners, lubricating hinges and latches, checking post plumb with a level, and photographing model stickers before you call.
Where DIY goes wrong: setting or resetting post footings (depth and concrete specs matter in Dallas clay, and a shallow post moves again within a season), replacing hinges on a loaded gate, and matching ES Windows-specific hardware without the model code. Get the code wrong and the part won’t fit, or fits badly and fails in months. For anything involving structural post work or a full hardware swap, call us. We’re an independent service provider, not affiliated with ES Windows. Call (844) 797-4808 to schedule your free estimate.
FAQs
Expect 10 – 15 years for a quality vinyl or aluminum installation with standard hardware, and 15 – 20 years if you go premium hardware and reset the post footings correctly. Our heat, humidity, and clay soil are the three things that shorten lifespan most. Call (844) 797-4808 for a free estimate on your specific setup.
Yes, in many cases. Loose hinges, latch misalignment, and minor panel shifting are usually repair jobs, not replacements. If the post footings are sound and the panels are square, we repair first. Call (844) 797-4808 and we’ll tell you honestly which path makes sense.
A single gate or hardware refresh is typically handled in a single visit. A full perimeter installation runs one to three days depending on footage, gate count, and whether posts are being reset. We confirm timing in your written quote so there are no surprises.
We source OEM hardware through dealer channels when fit or warranty demands it, and vetted aftermarket equivalents when the geometry allows it. Either way, we confirm the model code and test-fit before installing. You’ll see the sourcing in your line-item quote. Call (844) 797-4808 for a free estimate.
ES Windows isn’t the only brand we handle. We also work with KraftMaid, Cambria, and Silestone in our kitchen and bath projects, so one call covers more of the house.
Ready to price it out? Call (844) 797-4808 for a free estimate and design consult. Live person, 24/7, no voicemail. From foundation to finish line, built to last, backed in writing.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.