Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Home Additions & ADU: The Dallas Owner’s Guide
A home addition or ADU built with ES Windows products in Dallas typically runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a detached ADU, depending on square footage, foundation type, and finish level. We source ES Windows-compatible glazing, frames, and hardware and install to Dallas code, with most planning visits scheduled within a week of your estimate. If your unit is failing, you’ll usually spot it first as condensation trapped between panes, a window that won’t latch square in its rough opening, or water staining the drywall below a sill after a hard Dallas rain. Those are the three calls we get most often.

Which ES Windows Models This Apply To
ES Windows builds under several lines, and the part number lives on a label inside the sash channel or on the frame head, not on the glass. For additions in Dallas, the lines we most commonly encounter are the vinyl single-hung and slider series and the aluminum-framed units used in screened porches and ADU sunrooms. Pull that label before you call anyone, take a photo, and measure the visible glass width and height plus the frame depth from the interior stop to the exterior face. Those three numbers determine whether an OEM sash is still available or whether a matched aftermarket unit is the smarter call.
Here’s the decision most Dallas owners get wrong. On older ES Windows aluminum series, the original extrusion profiles were discontinued on some product runs, which means an OEM replacement sash may not exist. A good aftermarket fabricator can match the sightline and thermal break, but you need to match the rough opening exactly so the new unit seals against the existing flashing. Paying for OEM is worth it when the frame is still in good shape and you’re only swapping glass or hardware. When the frame itself is pitted, bowed, or letting water past the sill, an aftermarket unit sized to the rough opening usually costs less than chasing discontinued OEM parts.
We service ES Windows products across Dallas County, and we’re an independent construction provider, not affiliated with ES Windows. We also install KraftMaid, Cambria, and Silestone finishes on the interior side of additions when you’re building a kitchen or bath into the new space.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Home Additions & ADU Is Failing
- Fogging or moisture between the panes. The seal on the insulated glass unit has failed, which lets humid Dallas air in and condenses on the interior glass surface. Once the desiccant is saturated, the fog won’t clear, and the unit has to be replaced.
- Water staining or soft drywall below a sill. This points to a failed sill pan, missing backdam, or cracked sealant joint, and it’s the failure that does real structural damage in North Texas. Dallas sees intense wind-driven rain in spring and fall, and water that gets behind the frame will rot the sheathing before you notice it inside.
- A sash that won’t latch or drags on the frame. Usually a worn balance, a bent tilt-latch, or a frame that’s gone out of square as the addition settled. On Texas clay soils, foundation movement is the usual culprit, so the window is telling you something about the slab.
- Visible gaps at the frame-to-wall joint. Shrinking caulk or a failed flashing membrane lets air and water in. In an ADU, that means higher cooling bills in a Dallas summer and possible moisture behind the siding.
- Condensation on the interior glass in winter. A single-pane unit or a failed low-E coating will sweat when the outside air drops. It’s a comfort and efficiency problem, and it’s usually the first sign the glazing spec was too light for the climate.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Dallas, a typical ES Windows replacement unit installed runs $450 – $1,200 per window for a standard vinyl single-hung, and $800 – $1,800 for larger sliders or fixed units in an addition. A full home addition that includes new glazing on all sides lands in our $45,000 – $130,000 range, while an ADU build with ES Windows units runs $90,000 – $220,000. The range is driven by unit count, glass spec (low-E and argon cost more but pay back in a Dallas summer), frame material, and how much framing or flashing repair the existing opening needs.
We quote parts and labor as separate line items so you can see exactly what the unit costs and what installation costs. No surprise change orders. Every install is covered by our 730-Day Done Right Promise, and we pull the permits and pass the inspection on additions and ADUs. If the new unit leaks or the sash fails within that window, we come back and make it right.
DIY or Call Us?
You can safely check a few things yourself: photograph the label, measure the rough opening, confirm whether the sash or the whole unit is the problem, and look for caulk gaps you can see from the ground. What you shouldn’t do is pull a sash on a second-story unit, pry a frame out of a flashed opening, or reset an aluminum unit that’s sealed into a new addition. A window that’s installed out of square or flashed wrong will leak for years before you see it inside, and by then the sheathing is gone. On an ADU, a bad window install can also fail the final inspection. If the symptom is water intrusion or a frame that’s moving, call us at (844) 797-4808 and we’ll take a look.
FAQs
How long should ES Windows units last in Dallas? A properly installed vinyl or aluminum ES Windows unit typically lasts 15 – 25 years, but the insulated glass seal often fails sooner, around 10 – 15 years, because of Dallas’s heat cycling and humidity. The frame outlasts the glass, which is why a glass-only swap is often the right call.
Can the unit be repaired instead of replaced? Yes, if the frame and flashing are sound. A failed seal or a worn balance can be repaired without pulling the whole unit. If the frame is bowed or water has reached the sheathing, replacement is the honest answer. Call (844) 797-4808 for a free estimate and we’ll tell you which one you’re looking at.
How long does the swap take? A single unit swap runs 1 – 2 hours, and a full addition’s worth of glazing is usually a one- to two-day job once the units arrive. We confirm lead time when we quote, since some ES Windows lines ship faster than others.
How do you source the part? We match the label and rough-opening measurements against OEM availability first, then a matched aftermarket fabricator if the OEM run is discontinued. You get the part number and the source in writing before we order. Call (844) 797-4808 to start with a free estimate, and remember our 0% financing for 18 months plus $1,000 off projects over $10,000 if the repair grows into a larger addition.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.