Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Roofing: The Dallas Owner’s Guide
We install and replace ES Windows roofing components across Dallas, and a typical installed job runs $8,000 – $20,000 for a full roof replacement, with targeted repairs at $400 – $1,800. Most Dallas homeowners find us after a ceiling stain appears in a north-facing bedroom, or after a hailstorm pushes water past a flashing detail the original installer rushed. By the time you’re reading this, the leak has usually been active for a few weeks.

ES Windows built its name on window systems, and their roofing line is a smaller, more specialized catalog. That means homeowners who know their ES Windows window model often can’t find the same clean documentation for the roof side. We close that gap in Dallas, and we do it without pretending to be ES Windows.
Which ES Windows Models This Applies To
ES Windows roofing components fall into a few functional families: ridge vent systems, valley flashing kits, drip edge profiles, and the underlayment bundles that tie into their window-to-wall flashing details. The window-to-wall piece is the one that matters most in Dallas. When a window is replaced and the surrounding roof plane is disturbed, the transition flashing has to match the ES Windows window frame profile or you’ll get a slow leak at the head jamb that takes months to show.
To identify the right part, start with the label on the inside of the window sash (not the frame) and the model number stamped on any surviving roof flashing. If the flashing is gone, the window model number is your best guide. Measure the window rough opening and the roof pitch at the wall line. Those two numbers narrow the replacement flashing to a small set of options.
On the OEM-versus-aftermarket decision: for structural components like ridge vents and valley flashing, an OEM ES Windows match avoids fitment headaches, and we recommend it. For underlayment and standard drip edge, quality aftermarket equivalents perform identically and cost less. We’re an independent service provider, not affiliated with ES Windows, so we’ll tell you honestly which parts need the brand match and which don’t. We also service KraftMaid, Cambria, and Silestone products on other parts of your home.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Roofing Is Failing
Here’s what we actually see on Dallas roofs, and what each symptom usually means:
- Brown rings on ceiling drywall, especially after a north wind rain. North-facing roof planes take more wind-driven rain in Dallas, and a failed valley flashing or underlayment seam shows up there first.
- Daylight visible in the attic at a ridge or vent penetration. That’s a ridge vent or boot seal failure, and it lets attic heat and moisture straight into the deck, which accelerates rot in our summer heat.
- Lifted or curled shingle tabs near the window wall. Nail pops from a bad flashing install break the shingle seal and expose the deck to Dallas’s spring hail and summer UV.
- Granules in the gutters after a rain. Granule loss is normal aging, but heavy loss in less than 15 years points to a shingle that wasn’t rated for the heat load a Dallas roof actually carries.
- Water staining on the fascia or soffit at the drip edge. A failing drip edge lets water wick back under the roof edge, and the wood behind it softens quietly before it shows inside.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Dallas, here’s the honest range you should expect, parts and labor together:

| Scope | Installed Range |
|---|---|
| Targeted roof repair (flashing, vent, boot) | $400 – $1,800 |
| Tile roof repair | $600 – $2,500 |
| Full roof replacement (asphalt) | $8,000 – $20,000 |
| Metal roof installation | $15,000 – $40,000 |
The range moves with roof size, pitch, how many layers need tear-off, and whether the flashing detail is a simple ridge or a complex window-to-wall transition. What we quote is what you pay: upfront pricing, no surprises, written line-item so you can see parts and labor separately. Every job is covered by our 730-Day Done Right Promise on workmanship.
DIY or Call Us?
Roof work is one of the genuinely dangerous trades, and we don’t soft-pedal that. Steep pitch, Texas heat, and heights combine badly, and a fall is career-ending or worse. What you can safely check from the ground: look at the gutter line after a hard Dallas rain, look for lifted shingles at the window wall, and check the attic with a flashlight for daylight or staining. What you should never do yourself: climb a steep roof to reseat flashing, pull shingles, or chase a leak at a valley. That’s where a quick DIY fix turns into a $3,000 deck repair.
Call (844) 797-4808 for a free estimate. A live person answers around the clock, every day.
FAQs
How long does ES Windows roofing last in Dallas?
Expect 15 – 20 years for a standard asphalt system, less if it’s a builder-grade shingle that wasn’t rated for Dallas’s UV load. Metal systems run 40 years or more. Our technicians have up to 12 years of experience reading Texas roof wear, and we’ll tell you honestly how much life is left before recommending replacement.
Can the part be repaired instead of replaced?
Often yes. A failed vent boot or a single flashing detail is usually a repair at $400 – $1,800, not a full replacement. We inspect the whole roof and only recommend replacement when the deck or shingle field is actually compromised. Call (844) 797-4808 for an exact quote, and estimates are free.
How long does the swap take?
A targeted repair is typically a single visit. A full replacement runs one to three days depending on roof size and weather, and we schedule around Dallas rain windows rather than starting a tear-off we can’t finish dry.
How do you source the ES Windows part?
We match your window model number and roof flashing spec to the correct ES Windows component or a quality equivalent where an OEM match isn’t necessary. You get a written line-item quote before we order anything, so you see exactly what’s being sourced and why.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.
Ready to get your Dallas roof sorted? Call (844) 797-4808 for a free estimate – upfront pricing, no surprises, and the 730-Day Done Right Promise standing behind every job.