Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Kitchen Remodeling: The Dallas Owner’s Guide
If you’ve landed here, you’re probably trying to match an IKO product to a specific model, price the replacement honestly, or figure out whether a failing IKO component in your kitchen can be saved before it takes something else down with it. Groundwork Construction Co. of Dallas installs IKO-compatible kitchen components across Dallas, with installed kitchen remodeling running $14,000 – $45,000 depending on scope, and we handle IKO-specific sourcing as part of the bid rather than as a separate mystery. To be clear on one thing up front: we’re an independent Dallas construction company, not affiliated with IKO.

Most owners discover an IKO problem the same way. An IKO underlayment-backed floor starts flexing underfoot near the sink. An IKO waterproofing membrane behind the backsplash begins to bubble. Or an IKO roof deck over a kitchen addition starts showing water stains on the ceiling directly below. In every case the symptom shows up late, which is why we tell Dallas homeowners to get a trained eye on it the moment something feels off.
Which IKO Models This Applies To
IKO makes several product families that show up inside and above Dallas kitchens: IKO underlayments and waterproofing membranes, IKO roofing shingles and low-slope systems, and IKO soffit and fascia products often installed on kitchen additions and bump-outs. An IKO shingle like the Cambridge or Dynasty line behaves differently from an IKO low-slope membrane like Armourglass, and each has its own replacement path. Matching the exact product is the whole game, and labels don’t always make it easy.
Here’s the compatibility gotcha most owners miss: IKO product names have shifted across manufacturing runs. An IKO “Cambridge” shingle from an older batch and one from a recent batch can carry near-identical branding but different granule composition and exposure sizing. If you’re matching an IKO shingle or IKO membrane, look for the bundle label or roll stamp first, then the exposed dimension, and photograph both before you call anyone. On the OEM-versus-aftermarket question: IKO OEM keeps the warranty intact and guarantees fit. A quality aftermarket match can work for accessories, but for anything under a membrane, behind a backsplash, or above a ceiling, OEM wins because it’s the only path that preserves the IKO system rating.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Kitchen Remodeling Is Failing
These are the five symptoms we see most often in Dallas kitchens where an IKO product is involved:
- Water staining on the ceiling below a kitchen addition. An IKO shingle or low-slope membrane above has likely lost seal integrity at a seam, or the flashing at the kitchen-to-roof transition has failed. Dallas spring hail accelerates it.
- Bubbling or lifting behind the backsplash. An IKO waterproofing membrane has delaminated, usually because moisture got behind it through a caulk joint that failed.
- Soft or flexing floor near the sink and range. An IKO underlayment has lost bond, often after a slow dishwasher or ice-maker leak ran underneath unnoticed.
- Granule piles in the gutter or on the ground beside a kitchen bump-out. That’s IKO shingle surface wear, and it rarely reverses once it starts. Dallas summer heat speeds it up.
- Daylight or a draft at a kitchen addition soffit. An IKO soffit panel has loosened, which invites moisture into the fascia behind it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed IKO-compatible kitchen work in Dallas lands in the $14,000 – $45,000 range for a full remodel and $9,000 – $20,000 for a small kitchen remodel. The single largest cost driver is the working area you touch: keeping the replacement to one IKO component versus the component plus the layers around it. OEM parts cost more than aftermarket, and that difference shows up in the bid. Cabinet work runs $4,000 – $13,000, countertops $2,000 – $6,500, and backsplash $800 – $2,500, so you can see exactly where the money goes.
We price upfront, parts and labor broken out line by line, and the number you see is the number you pay. Every IKO-related install we complete is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right.
DIY or Call Us?
Some of this is a safe check by you. You can photograph the IKO label or bundle stamp, measure the exposed dimension with a tape, and note the date you first saw the symptom. That’s it. What you shouldn’t do: pull IKO shingles or cut into an IKO low-slope membrane yourself. Kitchen-addition roofs are often low-slope, and stepping onto one without proper fall protection is how capable homeowners get seriously hurt. Membranes behind a countertop are a different hazard, but the same principle applies. Both let water in silently, and reheating a membrane in place almost never restores the seal.
Call (844) 797-4808 for a free estimate. A live person answers, 24/7.
FAQs
An IKO shingle on a kitchen addition in Dallas typically performs for 15 – 25 years, and an IKO underlayment or waterproof membrane usually lasts 10 – 20 years. Dallas hailstorms shorten both windows. Call (844) 797-4808 for an exact lifespan estimate on your product.
Sometimes. A single broken IKO shingle or a lifted membrane edge is often repaired. Once the failure runs along a seam or shows granule loss, replacement is the honest call. Call (844) 797-4808 and we’ll tell you which side of that line you’re on.
An IKO component swap inside a kitchen usually runs one day. A shingle or membrane replacement above a kitchen addition takes two to three days in most Dallas homes. The full kitchen remodel timeline runs two to four weeks depending on scope. Call (844) 797-4808 to lock in your schedule.
We order the exact IKO product specified on your bundle label or roll stamp, OEM where warranty matters and quality aftermarket only for accessories. You’ll see the part line-itemed on your quote. Call (844) 797-4808 to start the free estimate.
We also work with KraftMaid, Cambria, and Silestone, so a single crew can handle the IKO piece and the rest of the kitchen. From foundation to finish line, we keep it in one contract.
If your IKO kitchen component is failing or you want a straight answer on what it costs to fix it, call (844) 797-4808 for a free estimate. Our technicians have up to 12 years of experience, arrive background-checked and uniformed, and the numbers on the bid are the numbers you pay.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.