A Groundwork company - serving Dallas, TX

Jerith Driveway & Pavers in Dallas, TX

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Jerith Driveway & Pavers: The Dallas Owner’s Guide

We install and service Jerith-compatible driveway and paver systems across Dallas, including the ornamental aluminum edging and paver restraint that hold a driveway edge in place, and a paver driveway installation here typically runs $7,000 – $18,000 depending on square footage, base prep, and the paver you pick. Most Dallas homeowners find us after a section of edging has heaved out of the ground, a paver border has started to walk, or a corroded anchor has let the edge of the driveway creep into the lawn. It usually starts small: one border paver sitting proud of the row, a gap behind the edging where soil has washed out, or a spike that has popped clean out after a summer of blackland clay swelling and shrinking under the slab.

professional roofing service in Dallas, TX

Call (844) 797-4808

Which Jerith Models This Applies To

Jerith builds ornamental aluminum fencing, railing, and landscape edging products, and the piece that matters most on a Dallas driveway is their aluminum paver edging and restraint system, sold in a few profiles and heights. The common residential retail profiles come in roughly 4-inch and 6-inch heights, in mill (raw aluminum), black, bronze, and white finishes, in 8-foot and 16-foot lengths with interlocking or straight sections. The compatibility gotcha: the connection style changed across product generations. Older sections connect with a male/female interlock tab; newer runs use a separate splice or channel connector. If you’re matching a single damaged stick to an existing run, measure the height at the end of a good section and photograph the joint before ordering anything. A 6-inch section will not sit in the trench dug for a 4-inch, and the wrong connector means the whole joint won’t close.

Here’s the honest OEM-versus-aftermarket call. For visible color-matched runs in black or bronze, a Jerith factory section is worth the money. For mill-finish utility edging buried behind pavers where nobody sees the finish, a quality aftermarket aluminum restraint performs identically at a lower price. We source both and we don’t stock parts or carry them on a truck; every order is matched to your actual run, so send us measurements and a photo. If your project also touches kitchen, bath, or countertop work, we handle KraftMaid, Cambria, and Silestone lines too. We’re an independent Dallas service provider, not affiliated with Jerith.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Jerith Driveway & Pavers Is Failing

  • Heaved or tilting edging. North Texas blackland clay swells when wet and shrinks when dry, and that seasonal movement pushes shallow-set aluminum up out of the trench. Once it lifts, the pavers behind it lose their lateral restraint.
  • Border pavers walking out of line. When the edging loosens, the edge course spreads toward the lawn under foot traffic and car tires. This is the symptom Dallas owners notice first, and it gets worse every rain.
  • Corroded or snapped anchor spikes. Galvanized spikes set in saturated soil can corrode and shear, especially where a downspout dumps water along the driveway edge. Loose anchors let the whole run rock.
  • Washout gaps behind the edging. Soil erodes out from behind the aluminum, leaving a void that lets the section lean. Poor drainage and a missing base of compacted crushed stone are almost always the cause.
  • Failed joints and popped connectors. Splice tabs and channel connectors can separate when the ground heaves. A visible gap or a section that won’t hold its line means the joint has let go.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Replacing or installing Jerith-compatible paver edging on a Dallas driveway is usually folded into the driveway job itself. A full paver driveway with fresh compacted base and aluminum restraint runs $7,000 – $18,000. If your pavers are sound and only the edging failed, expect to pay for removal of the old restraint, re-excavation, fresh compacted crushed-stone base, new aluminum sections and anchors, re-set of the edge pavers, and disposal. That range moves on square footage, how much base has to be rebuilt, the height and finish you choose, and how accessible the edge is.

You get upfront pricing with no surprises: we quote line items for parts and labor separately, so you see what the aluminum costs and what the install costs. Check a couple of things at bid time. Ask how deep the base goes and how it’s compacted; shallow, hand-tamped base is why edging fails the first summer here. And confirm drainage around the edge gets corrected, or the new section will wash out again. Every driveway job is covered by our 730-Day Done Right Promise, and we back it in writing. Call (844) 797-4808 to schedule your free estimate and design consult.

DIY or Call Us?

An owner can safely do a few things: walk the run to find lifted or loose sections, photograph the joint style and measure the section height, and clear soil and debris out of the washout so you can see the base. Pulling pavers and re-trenching by hand is where DIY goes wrong. Aluminum restraint only works if it sits on a properly compacted base and is spiked to standard depth, and Houston-grade hand-tamping won’t hold in Dallas clay. Get that wrong and the whole edge lifts again within a season. There’s no high-tension spring or live wire here, so it’s a stamina and technique problem rather than a dangerous one, but it’s unforgiving work.

Most of the small jobs land in a single visit once parts are on site. We arrive in uniform, background-checked, and we’ll tell you straight if repairing the existing run beats replacing it. Call us at (844) 797-4808, answered by a live person 24/7, and we’ll get you an honest number.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch