Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Driveway & Pavers: The Dallas Owner’s Guide
Kohler doesn’t manufacture driveway pavers or paving systems. What Kohler makes that touches your driveway is the drainage and water-management hardware underneath and around it: channel drains, linear grate systems, catch basins, and the cast-iron or stainless grates that sit flush in a paver field. If that’s the Kohler product you’re chasing a part for, we install and repair those systems across Dallas, and a full paver driveway in this market runs $7,000 – $18,000 installed. Drain hardware replacement itself is typically a smaller, single-visit job. For a failed grate, a cracked channel body, or a drain that stopped moving water, call (844) 797-4808.

Owners usually find the problem the same way. Water pools at the garage door after a hard rain instead of draining. A grate rocks underfoot when the car rolls over it. Or a channel body cracks through a Texas freeze and the paver field around it starts to settle. Groundwork Construction Co. of Dallas is an independent service provider and is not affiliated with Kohler; we work with Kohler drainage products because they hold up, and we’ll tell you plainly when a different route is the better spend.
Key Takeaways
- Kohler’s driveway-relevant products are drainage channels, grates, and catch basins, not the pavers themselves.
- Dallas clay soil and freeze-thaw swings are what kill these systems, not age alone.
- Most drain hardware swaps are a single-visit job; full paver work is quoted in writing before anyone starts.
- Every project is backed by our 730-Day Done Right Promise.
Which Kohler Models This Applies To
Kohler’s drainage line covers a few distinct product families, and the part you need depends on which one is buried in your driveway. Their linear channel systems use modular channel sections with matching grate profiles, and the grate is the piece that fails or goes missing most often. Catch basins and round area drains are separate families with their own covers and bodies. There have been generational changes to channel profiles and grate widths over the years, which is where most owners get stuck: the grate you buy online looks right in the photo and won’t seat in the channel you already own.
The reliable way to identify your part is by measurement, not by model name. Pull the old grate or cover, measure the clear opening width and the section length to the nearest eighth of an inch, and note the load rating stamped or molded on the piece. A driveway grate needs a heavier load class than a patio or pool-deck grate, and swapping a light-duty cover into a driveway is a common and expensive mistake. Bring those three numbers to the counter or to us and the match gets simple.
On OEM versus aftermarket: for a visible driveway grate, an aftermarket match in the same load class and material is a reasonable spend and often half the price. For a channel body that’s already set in concrete, stay with the OEM profile so the new section keys into the existing run. We don’t claim to stock parts or carry them on a truck. We identify the right part, source it, and install it correctly.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Kohler Driveway & Pavers Is Failing
- Water pooling at the garage door after rain. The channel is clogged, the grate is seated too high, or the run has settled out of pitch. Standing water at the door threshold is the first sign Dallas owners notice.
- A grate that rocks or clatters under the tire. The channel walls have spread or the grate has bent from repeated load. A rocking grate eventually cracks the channel body underneath it.
- A crack running through the channel body. In Dallas, water gets into a hairline crack, a hard freeze expands it, and the crack opens wide by spring. Cast iron and polymer bodies both crack this way.
- Sunken pavers in a strip along the drain line. Dallas’s expansive clay subsoil swells and shrinks with our wet-dry cycles, and the trench backfill around a drain is the first place it shows. This is settlement, not a failed paver.
- Rust staining or a corroded grate. Coating failure from standing water and fertilizer runoff. Cosmetic at first, structural once the metal thins.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Drain hardware replacement in Dallas typically runs in the low hundreds to just over a thousand dollars installed, depending on how many sections are involved and whether pavers have to come up and go back. If the drain failure has undermined the paver field, the floor moves up: paver driveway installation runs $7,000 – $18,000, a paver patio installation runs $3,500 – $11,000, and driveway replacement runs $5,000 – $14,000.

What drives the high end: load-class upgrades, multiple channel sections, custom pitch corrections, and re-setting a large paver area around the repair. Every quote is upfront pricing, with the line items written out. The number you see is the number you pay, and the work is backed in writing by our 730-Day Done Right Promise. We serve Dallas and the surrounding neighborhoods, and our technicians have up to 12 years of experience on drainage and hardscape work.
DIY or Call Us?
Here’s the honest split. You can safely lift a grate, clear debris and leaves out of the channel, flush the run with a hose, and measure the opening for a replacement part. None of that carries real risk. Where DIY goes wrong is deeper: cutting or resetting pavers to get at a channel body, correcting the pitch of a drain run, or lifting a section of driveway that’s bedded in compacted base. Get the base compaction wrong on reinstall and the whole strip settles again within a season. A cracked channel body is a cut-and-replace job, not a patch job. If a grate has collapsed into the channel or the drain has stopped moving water entirely, call (844) 797-4808 rather than prying at it. We’ll tell you what the repair actually needs.
FAQs
A cast-iron or stainless grate in a residential driveway typically gives 10 to 20 years in Dallas conditions; polymer channel bodies often go 15 to 25. Our clay soil movement and hard freezes shorten that. A channel that settles out of pitch fails early regardless of material. Call (844) 797-4808 for an assessment if yours is past its prime.
Often yes. A clogged channel, a loose grate, or a settled run can frequently be cleared, re-seated, or re-pitched without replacing the hardware. A cracked channel body or a corroded-through grate needs replacement. We’ll tell you which one you’re looking at before you spend. Call (844) 797-4808 for a free estimate.
A single grate or cover replacement is usually a single-visit job. A channel section replacement that requires lifting and re-setting pavers typically takes one to two days. We confirm the timeline in your written quote, so nothing surprises you. Call (844) 797-4808 to schedule.
We identify your part by clear-opening width, section length, and load class rather than by name, then source the OEM or a quality aftermarket equivalent matched to your existing run. We don’t carry parts on a truck or stock them locally. If a match isn’t available, we say so upfront. Call (844) 797-4808 for a free estimate.
Groundwork Construction Co. of Dallas handles Kohler drainage and hardscape work across the city, along with KraftMaid, Cambria, and Silestone for interior projects when you’re ready to look inside. Background-checked, uniformed technicians on every job, live people answering the phone around the clock, and 0% financing for 18 months plus $1,000 off projects over $10,000. Call (844) 797-4808 to schedule your free estimate and design consult.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.