A Groundwork company - serving Dallas, TX

Moen Driveway & Pavers in Dallas, TX

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Moen Driveway & Pavers: The Dallas Owner’s Guide

Moen doesn’t manufacture driveway or paver products, so when a Dallas homeowner searches “Moen driveway & pavers,” what’s usually happening is a mislabeled part tag from a bundled kit or a Moen-branded paver edging system that shipped with a landscape lighting package. We install and service Moen-compatible driveway hardscape components in Dallas, with paver driveway installations running $7,000 – $18,000 and concrete driveways $4,500 – $12,000 installed. Most owners discover the failure after a transition strip lifts, a bed edge separates from the driveway apron, or water starts pooling at the garage threshold after a North Texas downpour.

Two construction workers smoothing and finishing a new concrete driveway in Dallas, TX

Call (844) 797-4808

Groundwork Construction Co. of Dallas is an independent service provider. We’re not affiliated with Moen.

Which Moen Models This Applies To

Moen’s residential product catalog is dominated by plumbing fixtures – faucets, shower valves, and the 1222, 1225, and 1200 cartridge series. There is no Moen paver line, no Moen driveway system, and no Moen hardscape part number. If you’re holding a component with a Moen stamp on it near your driveway, it’s almost certainly one of three things: a Moen yard hydrant (the 9400 and 9500 series wall hydrants are sometimes set through a paver apron), a Moen landscape spigot assembly installed in a paver retaining wall, or a mislabeled part from a third-party hardscape kit that reused a Moen-branded box.

To identify the right replacement, start at the label. Moen stamps its model number in a small oval on the back of the hydrant body or inside the wall box. Write it down exactly – the 9400 and 9500 use different cartridge assemblies and won’t interchange. If there’s no Moen stamp anywhere on the part, you’re dealing with a generic hardscape fastener or a different brand, and Moen parts won’t fit. For OEM versus aftermarket: Moen-specific hydrant cartridges should stay OEM because the thread pitch and O-ring sizing are proprietary. Paver edging, joint sand, and polymeric binders are commodity products – quality aftermarket equivalents work fine and cost less.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Moen Driveway & Pavers Is Failing

  • Water pooling at the paver apron near a Moen hydrant. The cartridge seat has worn and the valve drips under pressure. Common in Dallas after freeze-thaw cycling between January and February.
  • Paver edge lifting 1/4 inch or more at the driveway transition. Polymeric joint sand has washed out and the bedding layer has shifted. Typically a drainage problem, not a paver problem.
  • Moen wall hydrant handle spins freely without shutting off water. The cartridge stem has stripped. You’ll see this indoors first as a slow drip through the wall penetration.
  • Settlement over a buried irrigation or hydrant line. Visible as a soft dip in the paver field within 12 – 18 months of installation. Indicates inadequate base compaction, not a Moen part failure.
  • Efflorescence bloom – white chalky crust on paver faces. Moisture wicking through the bedding sand. Can also signal a slow leak from a Moen fixture connection behind the wall.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Dallas pricing for the underlying hardscape work that surrounds a Moen hydrant or landscape fixture comes in two buckets: the Moen part itself and the paver or concrete work needed to access it. A Moen 9400 or 9500 replacement cartridge runs a modest parts charge; the labor to open the paver bed, replace the cartridge, and re-set the pavers is the bulk of the bill.

  • Paver driveway installation: $7,000 – $18,000
  • Concrete driveway installation: $4,500 – $12,000
  • Driveway replacement: $5,000 – $14,000
  • Driveway sealing: $250 – $700
  • Paver patio installation (matching field): $3,500 – $11,000

What drives the range: square footage, paver type, base depth required for Dallas’s expansive clay soils, and whether drainage correction is part of the scope. All work carries our 730-Day Done Right Promise – if it’s not done right, we make it right. Upfront pricing, no surprises: the number you see is the number you pay.

Two construction workers smoothing and finishing a new concrete driveway in Dallas, TX

DIY or Call Us?

A homeowner can safely check a few things: confirm the Moen model number from the stamp, verify whether water shuts off at the fixture handle, and visually inspect paver joints for missing sand or lifted edges. Photograph everything for your records before you touch it.

Where DIY goes wrong is at the wall penetration and cartridge swap. Loosening a Moen wall hydrant under live pressure can spray water into the wall cavity – freeze damage in the wall follows within a season. Pulling pavers to access a buried line without knowing the base depth risks destabilizing the entire driveway field, which turns a small parts job into a $5,000 – $14,000 driveway repair. That’s why we recommend a trained professional for anything beyond a visual check. Call (844) 797-4808 for a free estimate – same-day dispatch is available on Dallas driveways and paver repairs when the schedule allows.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch