Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Kitchen Remodeling: The Dallas Owner’s Guide
We install kitchen projects in Dallas built around Mr-Glass components, and a full kitchen remodel runs $14,000 – $45,000 installed, with most jobs completed in a single visit for individual component fixes. Mr-Glass is a kitchen and bath product line known for modular cabinetry, door fronts, and imported component systems, so when something fails it’s rarely the whole kitchen. Dallas owners usually notice it the same way we do: a drawer that won’t close flush anymore, a hinge that groans every time the door swings past 45 degrees, or a cabinet front that has started to delaminate near the sink where steam collects. It starts small and then one morning the door drops off its bracket.

Key Takeaways
- Installed kitchen remodel pricing in Dallas: $14,000 – $45,000, with cabinet installation alone at $4,000 – $13,000.
- Mr-Glass hinges and drawer slides are the parts that fail first; cabinet boxes and solid doors usually outlast them by a decade or more.
- We’re an independent service provider, not affiliated with Mr-Glass, so we can match compatible parts without a manufacturer backlog.
- Every job is backed by our 730-Day Done Right Promise, and your call is answered by a live person 24/7.
Which Mr-Glass Models This Applies To
Mr-Glass kitchen product lines run across several series, and the fitment differences matter more than most homeowners expect. The door and drawer hardware on earlier series uses a screw-on European-style hinge pattern with a specific cup bore, while later series moved to clip-on hinges with a different mounting plate. Get the plate wrong and the door won’t sit square no matter how carefully you adjust it. The right part starts with the right label: check the inside of the cabinet door, the underside of the drawer box, or the model sticker inside the cabinet frame. Measure the door thickness (most run 16mm to 19mm), the cup bore, and the overlay before you order anything.
For Mr-Glass specifically, OEM parts are the safe route when the piece is visible or load-bearing, like a matched door front or a corner cabinet panel. For internal hardware like hinges and slides, a quality aftermarket equivalent from a recognized European hardware brand fits the same bore pattern and often outlasts the original. We compare part numbers against the model label before we order, and we tell you upfront which route is cheaper and which holds up longer in a Dallas kitchen. If you’re mixing brands, we also service KraftMaid, Cambria, and Silestone installations alongside Mr-Glass.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Kitchen Remodeling Is Failing
Most Dallas owners don’t call about a part. They call about a symptom. Here’s what those symptoms usually mean.
- Doors that won’t stay closed or swing open on their own. The hinge spring has lost tension or the mounting plate has stripped out of the cabinet frame. Common after eight to ten years on a door that gets opened twenty times a day.
- Drawers that stick, squeak, or drop at the front edge. The slide has worn its runner track or the drawer box corner has loosened. In Dallas humidity swings from spring storms to August dry heat, the wood box expands and contracts and the slide loosens faster than it would in a stable climate.
- Delamination or bubbling on cabinet fronts near the sink or range. Heat and steam have worked under the laminate or veneer edge. Once moisture gets behind the front, the bond won’t hold, and patching it is a losing game.
- Sagging shelves or a cabinet frame that’s pulling away from the wall. The mounting screws have backed out or the frame has warped. This one affects load-bearing cabinet structure and is worth a professional look.
- A soft or spongy countertop edge or backsplash seam. Water has gotten behind the caulk line. Left alone, it reaches the substrate and turns a $800 – $2,500 backsplash job into a countertop and cabinet repair.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing for Mr-Glass-compatible kitchen work in Dallas follows the ranges below. The number you see is the number you pay, and the quote is written line-item so you can see what’s parts and what’s labor.
| Scope | Installed Range (Dallas) |
|---|---|
| Full Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives the range: door count and front style, whether the cabinet boxes stay or get replaced, countertop material (quartz and granite sit at the top, laminate at the bottom), and whether plumbing or electrical has to move. We pull permits where Dallas code requires them and pass inspection before we call the job done. Every job is covered by our 730-Day Done Right Promise, if it’s not done right, we make it right.
DIY or Call Us?
You can safely check a few things yourself. Open and close each door slowly and watch where it binds. Look at the hinge plate screws, but know that re-tightening into a stripped hole doesn’t fix it for long. Measure the cupboard bore and overlay so you have real numbers when you call. What you shouldn’t do: yank out an under-sink cabinet base to look for water damage without shutting off the supply, or start pulling countertops to check a seam. Countertop and cabinet removal is heavy, sharp, and easy to crack. We install Mr-Glass-compatible parts and full kitchen builds across Dallas with background-checked, uniformed technicians on every job. Call (844) 797-4808 to schedule your free estimate, and if it’s after hours, a live person still picks up.
FAQs
Expect most cabinet hardware and hinges to last eight to ten years before wear shows, while cabinet boxes and solid door fronts can run twenty years or more. Dallas heat and humidity push the timeline faster near the sink and range. If your kitchen is past eight years and one hinge has failed, plan on the rest of that row failing within a year. Call (844) 797-4808 and we’ll tell you whether a targeted replacement or a full cabinet swap makes more sense.
Often yes, for hardware. Hinges, slides, and drawer boxes are usually a repair, not a replacement, and swapping them out takes under an hour per door. Visible fronts with delamination or warped frames are the exception, since patching a failing laminate edge doesn’t hold. Call (844) 797-4808 for an exact quote, and estimates are free.
Most hardware swaps on a Mr-Glass cabinet run are done in a single visit, usually two to four hours for a full kitchen’s worth of hinges and slides. Full cabinet installation takes one to three days, and a complete kitchen remodel runs two to six weeks depending on scope. We’ll give you a written schedule with the quote. Call (844) 797-4808 to get yours.
We match the part number to the model label inside your cabinet frame before we order. For Mr-Glass OEM pieces we source through the manufacturer channel; for internal hardware we compare against a quality aftermarket equivalent that fits the same bore. Because we’re an independent service provider and not affiliated with Mr-Glass, we’re not locked into one supply path, so a discontinued part doesn’t stall the job. Call (844) 797-4808 to start your free estimate.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.