Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Dallas, TX
We provide independent Mr-Glass service across Dallas, TX – measuring, ordering, and installing frameless shower enclosures, sliding doors, custom mirrors, and retrofit kits for homeowners who want the brand’s glass without a dealer script. The one thing that makes our Mr-Glass work here different: we build every enclosure around the reality that Dallas bathroom walls move with the Blackland Prairie clay, so we verify plumb and shim the opening before a single hole is drilled. Call Groundwork Construction Co. of Dallas at (844) 797-4808 to schedule a free estimate on your Mr-Glass service.

Why Dallas Residents Choose Us for Mr-Glass Service
We work on Mr-Glass products every week. That means we know which frameless hinged enclosures hold up on a 1/2-in tempered panel, which semi-frameless sliders need a new bottom track rather than a new door, and how a tub-to-shower retrofit kit actually lands on an older Dallas curb. We’re an independent installer, not a factory dealer, so our recommendation on glass type, hardware, and sealing comes from what we see in Dallas homes – not from a sales binder.
Our technicians have up to 12 years of experience, and every one of them is background-checked and arrives in uniform. Parts get ordered per job against the exact model and glass size, because no two Dallas bathrooms are framed the same way and the wrong sweep ruins the fit. Most hardware and re-hang work is completed in a single visit. Every project is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Pricing is upfront and written before we start, and calls are answered by a live person 24/7.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Solve in Dallas
- Sliding-door rollers and bottom-track wear. Dallas humidity and hard-water mineral film gum up Mr-Glass aluminum channels, so doors start to jump or drag within a few years. We replace the rollers, clean the track, and reset the alignment rather than sell a whole new door.
- Silicone and sweep failure at the jambs and curb. Our wet-dry swings and slab movement open hairline gaps that let water track behind the enclosure and rot backer board. Fresh flexible, mold-resistant silicone and new sweeps close the gap before the wall behind it does damage.
- Hinge and pivot-point stress on frameless 1/2-in panels. Doors hung without verifying plumb on Dallas’s moving clay slabs sag and chip at the strike edge. Re-hanging to the actual opening solves it.
- Spotted or etched glass. Mineral-rich tap water and the abrasive cleaners people use to fight it fog the surface. We assess whether polishing recovers it or the panel needs replacing.
- Edge chips from tight curb cuts. Older East Dallas and Oak Cliff bathrooms often have narrow curbs that force the tempered glass edge against the wall. A chip at the edge means a new panel – tempered glass can’t be repaired or trimmed.
Mr-Glass Service in Dallas: What Local Conditions Mean for Your Equipment
Dallas sits on Blackland Prairie clay, and that clay swells and shrinks dramatically through the wet-dry cycle. Bathroom walls and shower curbs ride that movement with the slab. A Mr-Glass enclosure that was perfectly plumb the day it was installed can be noticeably out of square a few dry summers later, which is why a door that closed cleanly in year one starts to swing open on its own or catch at the bottom corner. What we do about it: measure the opening as it is now, not as the plans say it should be, and shim and re-hang to the actual wall. A typical job starts with a frameless door dragging on the curb in a slab-on-grade ranch home; the usual fix is dried-out silicone at the jambs, worn rollers or hinges, and minor out-of-plumb wall movement corrected together. In Oak Cliff’s older pier-and-beam bungalows the movement reads differently than in the 1950s-70s slab tracts – the wood floor and framing shift instead of the slab – so the enclosure gets checked against the room, not the foundation.
Mr-Glass Models & Products We Service in Dallas
We handle the model families Dallas homeowners actually have: frameless hinged shower enclosures built from 3/8-in and 1/2-in tempered glass, semi-frameless sliding shower doors with aluminum channel and rollers, custom-cut Mr-Glass mirrors and glass shelving for vanities and walk-in closets, and framed and frameless tub-to-shower enclosure retrofit kits. For parts, we use genuine Mr-Glass hardware and sweeps where the enclosure is still in production, and match quality aftermarket rollers, hinges, and seals when OEM parts are discontinued or back-ordered. Nothing sits in a local stockroom – each part is sourced to the specific model and glass dimension on your job. We re-seal and re-hang when the glass and frame are sound, and replace a panel only when tempered glass is chipped at an edge or the opening has been re-framed around a failing wall.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Dallas
Dallas pricing depends on glass thickness, panel count, hardware finish, and how much correction the existing opening needs. Here’s where our Mr-Glass work typically lands:
| Service | Typical Dallas Range |
|---|---|
| Frameless Glass Shower Enclosure | $4500-$12000 |
| Walk-In Shower Installation | $4500-$12000 |
| Tub-to-Shower Conversion | $3500-$10000 |
| Shower Replacement | $3000-$8500 |
Your free estimate includes measuring the opening, confirming glass size and hardware, and a written line-item quote – the number you see is the number you pay, with no change orders once work starts. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off. Call (844) 797-4808 for an exact quote on your Dallas bathroom.
Serving Dallas, TX – Our Local Coverage Area
We serve Dallas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Dallas
It drags because the rollers or bottom track are worn and clogged with hard-water mineral film, and often because the wall around the enclosure has shifted slightly out of plumb. Dallas humidity speeds up the mineral buildup that gums the channel, and clay movement does the rest. We clean or replace the track, fit new rollers, and re-hang the door to the actual opening. Call (844) 797-4808 and we’ll take a look.
Yes, within reason. Frameless enclosures are built to the measured opening, so we check the wall for plumb and square before ordering the glass and shim or fur out the frame where it needs it. A wall that’s drifted too far out of square gets corrected first, because a 1/2-in tempered panel can’t be bent to fit.
Squeegee the glass after every shower and use a mild, non-abrasive cleaner – the abrasive products people reach for in Dallas’s mineral-rich water are what etch the surface over time. A water repellent treatment on new glass helps, and we can assess whether existing clouding is surface film that polishes out or permanent etching.
Usually yes. A tub-to-shower conversion typically involves plumbing changes and sometimes framing, and Dallas requires permits for that work – the same way foundation repair here requires a permit tied to engineered plans. We confirm what your specific job needs before work starts. Call (844) 797-4808 for a free estimate that covers the permit question.
Go with 1/2-in tempered glass for a frameless hinged enclosure and 3/8-in for semi-frameless or sliding doors where a channel carries the panel. The extra thickness on a frameless door resists the hinge stress and sag that Dallas’s moving walls put on a hanging panel. Ask us during your free estimate and we’ll match thickness to your opening.
Service Areas Near Dallas
We provide Mr-Glass service across the Dallas service area and into surrounding communities, including Highland Park, University Park, Farmers Branch, Addison, and Irving. If you’re not sure whether your address falls inside our coverage, call and we’ll tell you straight.
Book Your Mr-Glass Service in Dallas Today
Whether it’s a dragging slider, a sagging frameless door, or a full frameless enclosure for a Dallas remodel, we’ll measure it, quote it in writing, and back the work with our 730-Day Done Right Promise. Call (844) 797-4808 for a free estimate – a live person answers around the clock, and we’ll find the earliest slot that works for you.
Written by the team at Groundwork Construction Co. of Dallas.