A Groundwork company - serving Dallas, TX

PGT Bathroom Remodeling in Dallas, TX

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

PGT Bathroom Remodeling: The Dallas Owner’s Guide

We install and service PGT windows, doors, and patio enclosure systems as part of bathroom remodeling across Dallas, with full bathroom remodel projects typically running $9,000 to $28,000 installed. If you’re replacing a single failed PGT component, the cost is much lower and we’ll tell you upfront. Most Dallas owners discover a PGT problem the same way: a window that won’t seal against summer humidity, a slider that sticks after a spring storm, or condensation between panes in the shower wall.

Professional applying sealant to an exterior window frame during construction in Dallas, TX

Call (844) 797-4808

PGT builds impact-rated and hurricane-rated products that hold up well, but the seals, rollers, and hardware do age in Texas heat and humidity. When one fails, it’s usually a single part, not the whole unit. The trick is matching the right replacement to your exact PGT model before anyone orders anything.

Which PGT Models This Applies To

PGT makes several product lines that show up in Dallas bathrooms: WinGuard impact windows, aluminum and vinyl single-hung and casement units, sliding glass doors, and shower and tub enclosure glass. Each line uses different hardware, weatherstripping, and glazing specs, so the model matters before a part is ordered.

To identify your unit, look for the PGT label etched or stickered in the frame channel, usually on the jamb or the top of the sash. Write down the series name and the glass size. If the label is gone, measure the visible glass and the frame opening; we can often match by dimension and hardware style.

On the OEM-versus-aftermarket call: for PGT impact and hurricane-rated products, OEM glazing and hardware are the safer route because the rating depends on the whole assembly. For rollers, screens, and seals on non-rated units, a quality aftermarket equivalent does the job for less. We’ll tell you which one your unit actually needs instead of defaulting to the pricier part.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your PGT Bathroom Remodeling Is Failing

  • Fogging between panes. The seal on the insulated glass unit has failed, letting moisture in. Common in Dallas bathrooms where shower steam meets a hot exterior pane.
  • Water pooling or staining on the sill. Worn weatherstripping or a failed corner seal lets rain and humidity in. Left alone, it reaches the wall framing.
  • A slider that drags or jumps the track. Worn rollers or a bent track. In older Dallas homes we also see track corrosion from years of humidity.
  • Drafts or a loose latch. Failed hardware or a sash that’s out of square. It shows up as a window that won’t lock flush.
  • Condensation on the room side that won’t clear. Often a sign the unit’s thermal seal is degrading, not just a humid day.

Each of these points to a specific part. Matching the symptom to the cause keeps you from replacing more than you need to.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In Dallas, a full bathroom remodel runs $9,000 to $28,000, and the range depends on square footage, tile and fixture choices, and whether the layout moves. Smaller projects land lower: a small bathroom remodel runs $5,000 to $12,000, a walk-in shower installation $4,500 to $12,000, a tub-to-shower conversion $3,500 to $10,000, and a bathroom vanity installation $800 to $3,000. A single PGT part replacement sits well below those numbers.

Project Installed Range (Dallas)
Full bathroom remodel $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement $3,000 – $8,500
Bathroom vanity installation $800 – $3,000

Every quote is line-itemed: part, labor, and any framing or sealing repair the opening needs. No change orders mid-job. All work is covered by our 730-Day Done Right Promise.

DIY or Call Us?

Some checks are safe to do yourself. Look at the PGT label, measure the glass, wiggle the sash to see if it’s out of square, and note where water is getting in. That information helps us order the right part the first time.

Where DIY goes wrong: replacing impact-rated glazing or resetting a unit in the opening. If the assembly isn’t reinstalled to spec, the impact rating can be void and the seal fails again in a Dallas summer. Bathroom glass and window work also means sharp edges and water intrusion risk if the seal is wrong. We’d rather do it once correctly.

Call (844) 797-4808 for a free estimate, and a live person answers, 24/7.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch