A Groundwork company - serving Dallas, TX

PGT Fence Installation in Dallas, TX

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

PGT Fence Installation: The Dallas Owner’s Guide

If your PGT fence system is failing, we install PGT-compatible fence replacement and installation for Dallas homeowners at $3,500 – $9,000 installed, and most jobs are completed in a single visit once materials are sourced. PGT is a Florida-based manufacturer best known for impact windows and doors, and its fence lines follow the same engineered-to-spec philosophy: extruded aluminum and vinyl systems built to hold up under heat, humidity, and wind load. Dallas owners usually discover a problem the same way – a gate that drops and drags, a post that wobbles after a storm, or panels that have gone chalky and brittle after a few Texas summers. That’s when they start looking for a real answer instead of a patch.

Two construction workers installing stone pavers for a driveway project in Dallas, TX

Call (844) 797-4808

Key takeaways:

  • PGT-compatible fence installation in Dallas runs $3,500 – $9,000 installed, depending on linear footage and material.
  • PGT fence parts are engineered to tight tolerances, so mismatched aftermarket hardware is a common failure source.
  • Texas heat and clay soil are hard on fence systems; post footings and expansion gaps matter more here than most places.
  • All our fence work is covered by the 730-Day Done Right Promise.

Which PGT Models This Applies To

PGT’s fence and exterior barrier products show up across its residential lines, and the part you need depends on which system is actually in your yard. The first step is identifying what you have. PGT stamps or labels its extrusions – check the top rail, the hinge-side post cap, and the inside face of any gate for a manufacturer mark, series number, or profile code. Fence sections are frequently replaced piecemeal over the years, so a single Dallas yard can hold parts from two or three different manufacturers. Measure before you assume. Post spacing, rail thickness, and picket gauge tell you more than a faded label.

On the OEM-versus-aftermarket question, PGT is stricter than most. Its aluminum profiles and gate hardware are matched to specific dimensions, and a generic bracket from a big-box store often leaves a fraction of an inch of play that turns into a rattling gate within a season. Quality aftermarket equivalents exist and can work well, but they need to match gauge and finish, not just look close. We’re an independent service provider, not affiliated with PGT, so we match your existing system by spec rather than selling you a brand name. If you’re weighing broader exterior upgrades alongside your fence, we also work with KraftMaid, Cambria, and Silestone on interior projects.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your PGT Fence Installation Is Failing

Fence failures in Dallas rarely happen all at once. They telegraph. Here’s what to watch for and what’s actually going on underneath:

  • Gate sags and drags on the ground. The hinge-side post has shifted or the hinge hardware has loosened. Clay soil movement and years of gate weight usually cause this, not the gate itself.
  • Posts wobble after heavy rain or wind. The footing has degraded or was set too shallow for North Texas soil. A leaning post is a foundation problem dressed up as a fence problem.
  • Panels look chalky, faded, or feel brittle. UV exposure has broken down the finish. Dallas gets intense summer sun, and a cheap finish degrades years faster than a properly extruded one.
  • Rails rattle or pickets come loose. Fasteners have backed out or the rail channel has widened. This is common when a fence was assembled with mismatched hardware.
  • Visible rust streaks or white corrosion at joints. Moisture is getting into unprotected cut ends or scratched finish. Left alone, it spreads along the rail.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

PGT-compatible fence installation in Dallas runs $3,500 – $9,000 installed, and that range is real – it reflects linear footage, material choice, gate count, and how much old fence has to come out first. Vinyl fence installation in Dallas also sits at $3,500 – $9,000, and aluminum fence installation at $4,000 – $10,000, so the number you land on depends on which profile matches your existing system and how much you’re replacing.

What moves you up or down the range: total linear feet, number of gates and whether they’re self-closing, post removal and re-setting, and property-line or HOA restrictions that affect fence height and placement. We quote parts and labor transparently with no-hassle upfront pricing, so the number you see is the number you pay, and every fence install is backed by our 730-Day Done Right Promise. We don’t claim to stock PGT parts or carry them on a truck – we source the right match for your system and price it honestly before work begins.

DIY or Call Us?

Some of this you can safely check yourself. Walk the fence line and note which posts are loose, measure your post spacing, photograph any manufacturer labels on rails and hardware, and check whether the gate hinges are worn or just loose. That information saves time when you call. What we’d steer you away from is re-setting posts or rebuilding gates yourself. Fence posts carry real load, and a badly set post becomes a hazard in the next Dallas windstorm – plus a torn-up footing is far more expensive to fix than to do right the first time. It’s also where most DIY fence projects go sideways: the part looks fine, the installation fails. Most jobs we handle are finished in a single visit once the right components are sourced. Call (844) 797-4808 to schedule your free estimate, and if you’re calling after hours, a live person answers – around the clock, no voicemail.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch