Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Home Additions & ADU: The Dallas Owner’s Guide
We build PGT-compatible home additions and ADUs in Dallas, and most projects land between $45,000 and $130,000 installed, with attached additions at the low end and full detached ADUs pushing toward $220,000. These are planned builds, not emergency repairs, so we schedule them properly rather than promising same-day work. Owners usually discover a problem in the structure itself, not in a single part: a hairline crack that keeps reopening over a doorway, a floor that has gone out of level at the junction where the addition meets the original house, moisture at the base plate, or a window wall that no longer seals because the framing under it has shifted. PGT products sit inside that larger assembly, and when a PGT opening starts to fail in Dallas, the cause is almost always the build around it or the way our North Texas soil moves under it.

Which PGT Models This Applies To
PGT makes a wide range of windows and doors, and the part that fits one series won’t fit another. On additions and ADUs, the PGT units we most often encounter are their vinyl new-construction and replacement window lines and their sliding glass and hinged patio doors. The trick to matching a part correctly is the sticker or etched glass marking on the unit, not a guess from looking at it. That marking tells you the series and the manufacturing code, and it’s the difference between ordering the right sash or roller the first time and ordering twice. If the label is gone, we measure the rough opening and the visible glass, and we photograph the hardware, because PGT has changed profile dimensions across production runs and an older Dallas addition may not take the same replacement part as one built a few years later.
Then comes the OEM-versus-aftermarket call. For a PGT unit, OEM hard parts (sashes, balances, locking hardware, door rollers) are the safe choice when you want the fit to be exact. Aftermarket weatherstripping, screens and seals are fine and often better value, because those parts wear out by design and don’t need to match a spec sheet to the thousandth of an inch. We’ll tell you plainly which parts are worth paying PGT prices for and which ones aren’t. We’re an independent builder and not affiliated with PGT, so we have no reason to steer you toward the expensive option.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Home Additions & ADU Is Failing
When an addition or ADU in Dallas starts to go wrong, it shows up in a handful of predictable ways. Here’s what to watch for, and what each symptom usually means:
- Recurring cracks above doors and windows. A crack that comes back after you patch it points to movement in the foundation or the header framing, not just a drywall problem. In Dallas, our expansive clay soil swells and shrinks with the seasons, and that flexes the whole structure.
- Doors and PGT door panels that stick or won’t latch. When a sliding or hinged PGT door suddenly drags, the opening has racked. The door hardware usually isn’t the culprit; the frame it hangs in has shifted.
- Water staining or soft spots at the base plate. An addition’s sill plate is the first place moisture finds if grading or flashing failed. Soft wood there is a structural flag, not a cosmetic one.
- Musty smell or rising humidity inside the ADU. Poor vapor control or a wall assembly that traps moisture will show up as odor and condensation before it shows up as visible rot. North Texas humidity is unforgiving to a wall built without a proper drain plane.
- Sagging roofline where the addition meets the house. This is the most serious one. A dip at the junction usually means a connection detail failed or a beam was undersized, and it needs eyes on it quickly.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
An attached home addition in Dallas typically runs $45,000 to $130,000 installed, and a detached ADU runs $90,000 to $220,000. A garage conversion, which is often the cheapest way to add living space, comes in around $30,000 to $80,000. What moves you up or down that range: square footage, whether a foundation has to be engineered for our clay soil, PGT window and door selections, mechanical and electrical tie-ins, and how much site work the lot needs.
We price parts and labor transparently. You get a written line-item quote, and the number you see is the number you pay, with no change orders sneaking in mid-build. If a PGT unit or a framing correction turns up mid-job, we talk to you before we touch it. Everything we build is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. We also pull the permits and pass the inspections, so the work is documented, not just done.
DIY or Call Us?
There’s a safe lane for a handy Dallas owner and a lane that will cost you. You can absolutely check and document: take photos of cracks, test PGT doors for smooth operation, watch for moisture at the base plate after a hard rain, and note which symptoms seem seasonal. That information helps us scope the job.
Where DIY goes badly wrong is structural. Racking an opening, sistering a beam, correcting a foundation, or reworking the flashing and vapor control on an addition is not a weekend project, and getting it wrong on a $100,000 build means paying twice. Movement and moisture don’t announce themselves; they show up years later. If any of the signs above match what you’re seeing, call us for an honest assessment. Reach a live person at (844) 797-4808, any hour, any day. Estimates are free.
FAQs
A well-built addition should serve the house for decades, but the PGT windows and doors inside it have a shorter service life, often 15 to 25 years depending on sun exposure and how well the wall assembly manages our Texas heat and humidity. The structure and the openings age at different rates, which is why we scope repairs separately. Call (844) 797-4808 to talk through what you’re seeing, and we’ll give you a free estimate.
Often, yes. A lot of what looks like a rebuild is actually a targeted fix: correcting a header, re-flashing an opening, replacing a failed PGT door panel, or shoring up a junction detail. We diagnose before we recommend, and we won’t sell you a full build when a repair will hold. Call (844) 797-4808 for a free estimate and a straight answer.
A garage conversion can take a few weeks, while a full detached ADU in Dallas often runs several months from permits through final inspection. The honest answer depends on permitting, foundation work for our soil, and material lead times, and we give you a real schedule rather than an optimistic one. Call (844) 797-4808 to get your project timeline and a free estimate.
We source PGT units through established supply channels using the model and manufacturing code from your existing unit, so replacement parts match the series instead of being a near-fit. We’re an independent builder and not affiliated with PGT, so we recommend the OEM part only when it actually matters. Call (844) 797-4808 for a free estimate and we’ll walk you through your options.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.