A Groundwork company - serving Dallas, TX

PGT Kitchen Remodeling in Dallas, TX

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

PGT Kitchen Remodeling: The Dallas Owner’s Guide

PGT kitchen remodeling parts in Dallas are sourced and installed at $14,000-$45,000 for a full kitchen, with most replacement parts and labor lines fitting well inside that band. We’re an independent service provider that installations PGT-aligned kitchen components, not an affiliate of PGT, and we quote fixed pricing before any work starts. Same-day service isn’t realistic for a kitchen overhaul, but we can usually diagnose a failed part, confirm the model fit, and schedule the swap within a few business days.

Two contractors framing a doorway during a residential bathroom renovation in Dallas, TX

Call (844) 797-4808

Most owners find out something’s wrong the slow way. A cabinet door stops sitting flush after a summer of Dallas humidity. A drawer glide starts grinding. A vent hood that pulled hard two years ago now just makes noise. Then the countertop edge lifts or a hinge rips its screw holes out of the stile, and the kitchen stops behaving like the kitchen you paid for.

Which PGT Models This Applies To

PGT is best known for impact windows and doors, so most homeowners who call us about “PGT kitchen parts” actually mean one of two things: a PGT-labeled cabinet or millwork package from a builder-grade Dallas home, or a kitchen accessory (hardware, inserts, edge profiles) carrying the PGT name on a product label. Both matter, and both fail the same way – quietly, then all at once.

Identifying the right replacement comes down to three measurements and one label:

  • Model or series label – stamped on the inside face of cabinet doors, on the back of drawer boxes, or on a sticker inside the sink base. Photograph it before anything else.
  • Opening dimensions – height, width, and depth of the box the part sits in. Off by 1/16″ and a replacement glide or hinge won’t seat.
  • Mounting pattern – count the screw holes and measure center-to-center spacing. This is where aftermarket parts most often go wrong.

On OEM versus aftermarket: PGT’s original spec parts fit cleanly but carry a premium and can be slow to source. Quality aftermarket equivalents from established hardware makers match the same opening specs, often at half the OEM cost, and we’ll show you both quotes side by side. What we won’t do is drop in a generic part that technically bolts up but binds a week later. Dallas homes go through real seasonal movement – summer humidity swells wood, winter dryness shrinks it – and undersized hardware fails first.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your PGT Kitchen Remodeling Is Failing

The symptoms are usually obvious once you know what to look for. Each one points to a specific part.

  • Sagging cabinet doors that won’t stay aligned. A worn hinge or stripped screw hole in the stile. Dallas humidity accelerates hinge wear because the door panel swells and the hinge has to fight it every open and close.
  • Drawers that grind, stick, or pull crooked. Failing drawer glides, usually the nylon wheel type that dries out and cracks after years of temperature swings. Once one side fails, the other follows.
  • Countertop edge lifting or separating. Adhesive failure at the substrate, common in older Dallas kitchens where the original install used adhesive only and no mechanical support.
  • Soft-close doors that slam. The damper cartridge inside the hinge body has worn out. The hinge itself may be fine; only the damping mechanism is gone.
  • Vent hood or cabinet-mounted appliance vibrating loose. Mounting hardware or a mounting rail has backed out, and the part is under stress every time the appliance runs.

If two or more of these are true at once, the kitchen is telling you the hardware package is past its lifespan, not that one part gave out. That’s a conversation worth having before a small fix turns into a cabinet rebuild.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Dallas homeowners, the honest picture looks like this:

  • Individual PGT-compatible part replacement (hinge, glide, edge profile): quoted per job after the model is confirmed
  • Cabinet Installation: $4,000-$13,000
  • Countertop Installation: $2,000-$6,500
  • Backsplash Installation: $800-$2,500
  • Kitchen Island Installation: $3,000-$10,000
  • Full Kitchen Remodel: $14,000-$45,000
  • Small Kitchen Remodel: $9,000-$20,000

What drives the range up: substrate repairs behind the cabinets, cabinet replacements instead of hardware swaps, and countertop material upgrades. What drives it down: a single part matched exactly to your existing PGT model with no cabinet work behind it.

Every job comes with a fixed written quote – no change orders after the fact. That work is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. If you’re replacing parts across a whole kitchen, projects over $10,000 get $1,000 off, and 0% financing for 18 months is available.

DIY or Call Us?

Replacing a single drawer glide or a hinge on a cabinet door is safe to check yourself. Pull the drawer, photograph the glide, measure the opening, and count the mounting holes. That’s exactly the information we need on the first call.

Where DIY goes wrong: wood stiles that have lost their screw threads, countertop edge failures where the adhesive failed because the substrate flexed, and anything mounted to a cabinet that’s already been re-drilled twice. In older Dallas kitchens, re-drilling into the same stile is how a $6 part turns into a $400 cabinet-side repair. And any work involving electrical hardware behind a cabinet, or gas appliance hookups, is not a homeowner job.

Here’s what to check yourself:

  1. Photograph the part and the cabinet label
  2. Measure the opening and mounting pattern
  3. Note whether the failure is cosmetic or structural

Then call us at (844) 797-4808 for a free estimate. We’ll confirm the model, quote both OEM and aftermarket options, and schedule the swap.

FAQs

How long do PGT kitchen components last in Dallas?
Expect 10-15 years on cabinet hardware in a Dallas kitchen, shorter on drawer glides (often 7-10) because the nylon wheels degrade faster under summer heat. Wood cabinet parts last longer if the hinges and seals hold, since they keep the panels stable.

Can it be repaired instead of replaced?
Sometimes. Hinge screws can be re-threaded with inserts, and dampers can be swapped without replacing the hinge body. Countertop edge separation and cabinet box damage usually need replacement, not repair. Call (844) 797-4808 for a free assessment before assuming the worst.

How long does the swap take?
Single-part replacements are typically done in under an hour on-site. Multi-part hardware packages or cabinet-side repairs run a half day to a full day depending on how much cabinets need to come out.

How do you source the PGT part?
We match your model label and measurements to original or verified aftermarket equivalents, quote both, and let you choose. We don’t stock parts locally and don’t carry inventory on a truck – sourcing runs through established suppliers who confirm compatibility against your model before we order. We also service KraftMaid, Cambria, and Silestone kitchens for any nearby neighbors who need matching help.

If your PGT-labeled kitchen is failing part by part, getting it fixed right the first time is far cheaper than living with the workarounds. Call Groundwork Construction Co. of Dallas at (844) 797-4808 for a free estimate. We answer live, 24/7 – no voicemail, no waiting until Monday. Background-checked, uniformed technicians arrive with the model confirmed and the parts matched. Schedule your free estimate today.

Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch