Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Plant Prefab Driveway & Pavers: The Dallas Owner’s Guide
We install Plant Prefab-compatible driveway and paver systems in Dallas, and most full paver driveways run $7,000 – $18,000 installed, with concrete at $4,500 – $12,000. Plant Prefab homes are modular, precision-built structures, and the sitework around them – the driveway, walkways, and paver aprons – takes more abuse than almost any other surface on the property. Dallas owners usually discover a problem the same way: a low spot that holds water after a storm, a paver that rocks underfoot near the garage, or a hairline crack that widens through a North Texas summer. When that happens, the question isn’t whether to fix it. It’s what failed, what it costs, and who does it right the first time.

Key Takeaways
- Plant Prefab-compatible paver driveways in Dallas typically run $7,000 – $18,000 installed; concrete runs $4,500 – $12,000.
- The most common failure we see on modular-home sites isn’t the pavers – it’s the base and drainage underneath them.
- We’re an independent contractor, not affiliated with Plant Prefab, but we know how their homes sit on a lot and what that means for sitework.
- Every project is backed by our 730-Day Done Right Promise.
Which Plant Prefab Models This Applies To
Plant Prefab builds modular and panelized homes across several product lines, and the driveway scope isn’t tied to a single model – it’s tied to how your home landed on the lot. The important variables are the garage apron height, the utility and grading footprint set during siting, and the finish floor elevation relative to the street. A two-story modular set on a sloped Dallas lot needs different drainage fall than a single-story panelized home on a flat Plattsburgh-style pad. You identify what you’re working with by checking the site plan and grading documents in your homeowner packet, not by matching a part number.
On the OEM-versus-aftermarket question: Plant Prefab doesn’t manufacture pavers, so there’s no proprietary “Plant Prefab paver” to source. What matters is matching the paver spec – thickness (typically 60mm for driveways, 80mm for heavier loads), compressive strength, and the base depth your site plan calls for. We spec to the plan and to Dallas soil conditions. If you’re also updating interiors down the line, we work with KraftMaid, Cambria, and Silestone on those trades, but driveway and pavers is its own scope with its own material partners like Belgard.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Plant Prefab Driveway & Pavers Is Failing
Here’s what Dallas owners actually report, and what’s usually behind it.
- Ponding water after rain. The base has settled unevenly or the drainage fall was never set correctly against your home’s modular footprint. On Dallas’ expansive clay soils, this shows up fast – often within the first two summers.
- Pavers that rock or shift underfoot. Usually a failed bedding layer or inadequate base compaction. A single rocking paver near the garage apron often signals a wider base problem, not a one-off.
- Widening cracks in concrete sections. North Texas heat cycling and clay movement crack slabs that weren’t jointed or reinforced for the soil. Hairline cracks are cosmetic; cracks wider than a credit card let water into the base and accelerate failure.
- Sunken areas near downspouts or the garage threshold. Water concentrated in one spot has been eroding the base for a while. This is a drainage fix as much as a surface fix.
- Loose sand or joint material washing out. Polymeric sand that keeps evacuating means water is moving through the system where it shouldn’t. Left alone, it undermines the whole field.
Replacement Cost & What’s Included
In Dallas, here’s what the work runs, installed, with materials and labor included.
| Scope | Installed Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement | $5,000 – $14,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway sealing | $250 – $700 |
The range is driven by square footage, base depth required by your grading plan, paver selection, and whether drainage correction is part of the job. We give you a line-item written quote – base prep, materials, labor, haul-off – so you see where every dollar goes. Upfront pricing, no surprises: the number you see is the number you pay. And the work is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction.

See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself. Walk the driveway after a hard rain and note where water pools. Look at the joints for washed-out sand. Check whether pavers rock underfoot near the garage and front walk. Those observations tell you a lot, and they’ll help any contractor quote you accurately.
What we’d steer you away from is resetting base and pavers yourself on a modular home. The reason is simple: get the drainage fall wrong against a Plant Prefab footprint and you’re not fixing a cosmetic issue, you’re directing water toward your foundation. Correcting that later costs far more than doing it once, correctly, now. The base spec is where the money hides, and it’s invisible once the pavers go down. Call us at (844) 797-4808 and we’ll walk your Dallas property with you and give you an honest read on what actually needs to happen.
FAQs
A properly installed paver driveway in Dallas lasts 25 to 30 years or more, because the pavers themselves don’t fail – the base does. Our expansive clay soil is the variable, so compaction and drainage at installation determine lifespan more than the paver brand does. Call (844) 797-4808 if you want an honest assessment of an existing driveway.
Often yes. If the failure is localized – one settled section, washed-out joints, a cracked slab – we can lift and reset pavers or repair concrete without tearing out the whole driveway. If the base has failed broadly, spot repairs just buy time. We’ll tell you plainly which one you’re looking at, and the estimate is free.
Most paver driveway projects in Dallas take three to five working days from demolition to final compaction, depending on square footage and whether drainage work is included. Concrete typically runs two to four days plus cure time before you drive on it. We’ll give you a realistic schedule in your written quote, not a best-case number.
We work through a curated portfolio of top-tier material brands – Belgard among them for pavers – so you’re choosing quality, not just whatever’s in stock. We don’t carry parts on a truck; materials are ordered to your spec and delivered to the job. That’s how we match your Plant Prefab site plan rather than approximating it. Call (844) 797-4808 for a free estimate and design consult.
Get Your Dallas Driveway Priced Right
If your Plant Prefab home’s driveway is pooling water, rocking underfoot, or cracking through another Texas summer, don’t wait for it to get worse. Groundwork Construction Co. of Dallas has been serving Dallas and the surrounding communities since 2014, and our technicians bring up to 12 years of experience to every job. You get calls answered by a live person 24/7, background-checked technicians in uniform on every project, 0% financing for 18 months, and $1,000 off projects over $10,000. From foundation to finish line, built to last and backed in writing. Call (844) 797-4808 today for your free estimate – we’ll tell you exactly what your driveway needs and exactly what it costs.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.