A Groundwork company - serving Dallas, TX

Quikrete Driveway & Pavers in Dallas, TX

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Quikrete Driveway & Pavers: The Dallas Owner’s Guide

We install Quikrete-compatible driveways and pavers across Dallas, and most hardscape projects here run $4,500 – $12,000 for a concrete driveway, $7,000 – $18,000 for pavers, and $350 – $700 for sealing. When an owner calls us about a failing Quikrete surface, it usually isn’t a mystery: they’ve got a hairline crack that keeps widening, sunken paver corners, or staining that won’t scrub out after a hard North Texas rain. Groundwork Construction Co. of Dallas is an independent service provider and is not affiliated with Quikrete.

Construction worker using a plate compactor on driveway gravel base in Dallas, TX

Call (844) 797-4808

Key Takeaways

  • Most Dallas driveways we repair or replace land in the $5,000 – $14,000 range, depending on material and square footage.
  • Quikrete’s footprint here is the surface layer (topcoat, repair patches, paver joint sand), not a machine or appliance with a replaceable component.
  • Blackland soil movement is the number-one reason Dallas slabs crack and settles within a few years.
  • Our crews install compatible materials and stand behind the work with the 730-Day Done Right Promise.

Which Quikrete Models This Applies To

Quikrete doesn’t manufacture a “driveway machine,” so the compatibility question is about product family. The Quikrete lines that show up on Dallas driveways are: Re-Cap Concrete Resurfacer (for worn slabs), Concrete Patch or Vinyl Concrete Patcher (for chips and spalls), and the paver joint sand (PowerLoc and similar). Each has a distinct role and a distinct compatibility window.

The identification trick most DIYers miss: read the bag label, not the shelf tag. Quikrete Re-Cap covers roughly 50 sq ft per 40-lb. bag at a 1/16″ coat; if you’re trying to resurface a 400 sq ft Dallas driveway, that bag count matters to your budget long before a crew shows up. Concrete Patch sanded blends look similar to the paver joint sand, but they aren’t interchangeable – the wrong one won’t set hard enough to lock pavers through a Texas summer.

On the OEM-versus-aftermarket question: Quikrete is an established name in concrete products, but if you’re comparing it to a Sakrete or a private-label joint sand, the difference usually comes down to the aggregate and the dry-mix blend. For most Dallas driveway repairs, the more consequential decision isn’t the brand – it’s whether the sub-base under the surface is sound. We’d rather put a mid-tier patch on a properly graded base than a premium patch on moving clay.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Quikrete Driveway & Pavers Is Failing

Five symptoms we see time after time on Dallas properties:

  • Widening cracks in a resurfaced slab. Re-Cap is a thin topcoat; it won’t hide a moving base. Cracks reappear because the slab below is shifting on Blackland clay.
  • Sunken or rocking pavers. Nearly always a compromised sub-base or a failed edge restraint. Dallas’s summer heat dries out the joint sand and lets pavers settle.
  • Joint sand washing out after storms. North Texas rain events are fast and heavy; fine joint sand erodes from the pavers within one or two seasons if the surface wasn’t compacted.
  • White efflorescence or chalky staining. Salts migrating to the surface through the concrete; it doesn’t mean the slab is doomed, but it does signal moisture movement.
  • Spalling and flaking near the garage apron or curb cut. Often from de-icer salt tracked in during the rare Dallas ice event, or from poor initial finishing.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing for Dallas hardscape, calibrated to the local market:

Project Typical Installed Range
Concrete driveway installation $4,500 – $12,000
Paver driveway installation $7,000 – $18,000
Driveway replacement $5,000 – $14,000
Driveway sealing $350 – $700
Paver patio installation $3,500 – $11,000

What drives the range: total square footage, sub-base condition, whether old concrete has to be demolished and hauled away, drainage corrections (Dallas lots often need re-grading), and paver selection. Our quotes are written line-item, upfront pricing with no surprises – the number you see is the number you pay. Warranty on the work is covered under the 730-Day Done Right Promise. Call (844) 797-4808 for a free project estimate and design consult.

DIY or Call Us?

Small jobs you can handle yourself with reasonable confidence: patching a hairline crack under 1/4″ with Quikrete Concrete Patch, sweeping in joint sand on a stable paver field, or rolling on sealer over a clean, dry surface. Those aren’t dangerous and the worst-case outcome is a redo.

Where DIY breaks down for Dallas owners: cutting out a settled paver section and rebuilding the base, or trying to resurface a slab that’s still moving. Mixing and curing concrete in a Dallas July (surface temps north of 130°F in direct sun) is its own skill, and a bad pour can damage the adjacent slab or driveway apron. If you’re looking at a section that’s already moving, call us at (844) 797-4808 and we’ll walk through what’s happening before any work starts.

FAQs

How long does a Quikrete-resurfaced or Quikrete-paver driveway last in Dallas? A properly installed concrete surface with a sound base runs 20 – 30 years; paver surfaces last decades longer if the edge restraint is intact. A thin resurfacing coat on a moving slab may show cracks again within 2 – 3 years.

Can I repair the surface instead of replacing the whole driveway? Yes, if the underlying slab or sub-base is sound. Localized patching with Quikrete Concrete Patch or a paver reset solves most cosmetic issues. Call (844) 797-4808 for a free assessment of whether repair or replacement makes financial sense.

How long will a Quikrete-compatible repair take? A simple crack patch or paver reset is typically a single-visit job. A full driveway replacement in Dallas usually runs 3 – 7 days depending on demolition and cure time.

How do you source the right Quikrete product for my driveway? We read the label spec on your existing surface, measure square footage, and match the correct product family (Re-Cap, Concrete Patch, or paver joint sand). If you’re comparing alternatives, we also work with Belgard pavers and can discuss options across the trade. Call (844) 797-4808 to get started.

Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-4808
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Groundwork Construction Co. of Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch