Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sakrete Home Additions & ADU: The Dallas Owner’s Guide
Quick answer: A home addition for a Dallas homeowner typically runs $45,000 – $130,000 installed, and ADU construction runs $90,000 – $220,000. Sakrete is a bagged concrete and mortar brand, not a finished part, so the real question is whether the Sakrete concrete in your foundation, slab, or stem wall is holding. We pour, repair, and tie new construction into existing Sakrete-built surfaces for additions and ADUs across Dallas.

Owners usually find the problem the same way. A crack in the slab under the back door starts walking. The threshold sticks. A contractor bidding an addition says the existing stem wall tests weak, or the Sakrete footing mix under the old porch has spalled and crumbled at the edge. Sometimes it’s simpler: a slab poured years ago with a Sakrete bag mix that was too wet on a July day in Dallas, and now it won’t hold an anchor for a new wall bottom plate. Either way, the addition can’t move forward until the substrate is evaluated and corrected.
Which Sakrete Models This Applies To
Sakrete doesn’t sell “models” the way Andersen sells window series. It sells bagged mixes: High-Strength Concrete Mix, Sand Mix, Mortar Mix, Concrete Resurfacer, fast-setting mixes, and crack sealant. Your project ties to whichever mix went into the existing slab, footing, or repair patch. The bag rating matters. Sakrete High-Strength Concrete Mix is formulated to reach around 4,000 psi at full cure; general-purpose mixes land lower. That difference becomes real when a structural engineer specs anchors or a new load-bearing wall bears on existing concrete in a Dallas addition.
Identifying what’s there takes work. Look for pour records, the original builder’s plans, or core samples if none exist. On older Dallas homes, especially in neighborhoods built before the 1980s, footings may have been site-mixed and never documented at all. That’s when a core test and a probe matter before anyone designs over it.
Here’s the OEM-versus-aftermarket call for Sakrete specifically: Sakrete is a consumer and pro-grade bag brand, and Quikrete, CTS, and regional ready-mix suppliers all make direct equivalents. For structural work under an addition, an engineer cares about specified psi, not brand loyalty. We match the spec. We source the mix that meets it, and we tell you when the brand on the bag doesn’t matter. Groundwork Construction Co. of Dallas is an independent service provider and is not affiliated with Sakrete.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sakrete Concrete Under a Home Addition or ADU Is Failing
- Spalling and flaking at the surface. Freeze-thaw cycles and the clay soil movement common across Dallas crack the top layer and pop it loose. Sakrete resurfacer covers cosmetic flaking; structural spalling means the mix itself is failing.
- Hairline cracks that widen seasonally. Dallas sits on expansive clay that swells after spring rain and shrinks hard in August. Cracks that open and close with the seasons point to slab movement, not just surface shrinkage.
- Crumbling at edges and control joints. A mix poured too wet or cured too fast loses strength at the perimeter. If the edge of an old Sakrete porch slab crumbles when you press a screwdriver into it, that concrete won’t carry a new wall.
- Anchors that won’t hold. If a wedge anchor spins or pulls out when you set it into an old slab or stem wall, the concrete is too soft for structural attachment. That’s a full stop for anyone framing an addition onto it.
- Efflorescence and damp patches. White salt staining or persistent damp spots on a slab or footing mean moisture is moving through the concrete. Under an ADU, that’s a problem for the finished floor and the framing above it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Dallas, plan on these ranges:
| Scope | Installed range |
|---|---|
| Home addition (full scope) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
What drives the range: the condition of the existing concrete and how much substrate repair is needed, the addition’s footprint and roofline tie-in, whether plumbing and electrical need to be extended, and permit and inspection costs specific to the City of Dallas. Foundation evaluation and any Sakrete-compatible slab or footing repair are quoted as line items, not buried. You get upfront pricing with no surprises. The number you see is the number you pay, and every job is covered by the 730-Day Done Right Promise.
DIY or Call Us?
An owner can safely look and document. Take photos of cracks, note where water pools, check for efflorescence, and note the season when cracks open. If you have the original plans or pour records, pull them. What you should not do is make the structural call yourself. Whether existing concrete can carry a new wall, an ADU footing, or a load-bearing beam is an engineering question, and getting it wrong means a foundation repair that costs far more than the addition. Anchoring, cutting, and pouring structural concrete under a habitable structure is also permit work in Dallas, and inspections will catch shortcuts. Call (844) 797-4808 and we’ll evaluate what’s there, give you a written scope, and pull the permits.
FAQs
How long does Sakrete concrete last under a Dallas addition? Properly mixed and cured Sakrete concrete can last decades, but in Dallas clay soil and heat, that lifespan depends heavily on the mix ratio, curing, and drainage. Poorly mixed or fast-cured concrete can show failure within five to ten years.
Can failing concrete be repaired instead of replaced? Sometimes. Cosmetic spalling and minor surface cracks often take a resurfacer or crack sealant. Widening cracks, crumbling edges, or anchors that won’t hold mean structural replacement. Call (844) 797-4808 for an honest evaluation.
How long does a substrate repair take before an addition can start? Surface repairs can be a day or two. Structural footing or slab repair can take one to three weeks including cure time before framing begins. The addition itself takes longer. Call for a scoped timeline.
How do you source the right mix for my project? We match the specified psi and application, not just the brand. If Sakrete meets the spec, we use it. If a ready-mix supplier makes more sense for the volume, we source that. Call (844) 797-4808 for a free estimate.
When you’re ready to price an addition or ADU in Dallas, call Groundwork Construction Co. at (844) 797-4808 for a free project estimate and design consult. Live person, 24/7. We also work with KraftMaid, Cambria, and Silestone on the interior finishes that make an addition feel like part of the home. Built to last, backed in writing.
Written by the team at Groundwork Construction Co. of Dallas, serving Dallas and nearby areas.